UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

FORM 10-K

For the fiscal year ended December 28, 2024

OR

For the transition period from                to

Commission file number 0-19882

KOPIN CORPORATION

(Exact Name of Registrant as Specified in its Charter)

Registrant’s telephone number, including area code: (508) 870-5959

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(b) of the Act:

None.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☒ Yes ☐ No

Indicate by check mark whether the Registrant is a large, accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of “large, accelerated filer,” “accelerated filer,” “smaller reporting company,” and emerging growth company in Rule 12b-2 of the Exchange Act. (Check one):

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in rule 12b-2 of the Exchange Act). Yes ☐ No ☒

As of June 29, 2024 (the last business day of the registrant’s most recent second fiscal quarter), the aggregate market value of outstanding shares of voting stock held by non-affiliates of the registrant was $99,230,825.

As of April 16, 2025, 162,067,000 shares of the registrant’s Common Stock, par value $.01 per share, were issued and outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement relating to the registrant’s annual meeting of stockholders are incorporated by reference in response to Items 10, 11, 12, 13 and 14 of Part III of this Form 10-K.

INDEX

Part I

Forward Looking Statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which are subject to the safe harbor created by such sections. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “could,” “would,” “seeks,” “estimates,” and variations of such words and similar expressions, and the negatives thereof, are intended to identify such forward-looking statements. We caution readers not to place undue reliance on any such “forward-looking statements,” which speak only as of the date made, and advise readers that these forward-looking statements are not guarantees of future performance and involve certain risks, uncertainties, estimates, and assumptions by us that are difficult to predict. Various factors, some of which are beyond our control, could cause actual results to differ materially from those expressed in, or implied by, such forward-looking statements. All such forward-looking statements, whether written or oral, and whether made by us or on our behalf, are expressly qualified by these cautionary statements and any other cautionary statements which may accompany the forward-looking statements. In addition, we disclaim any obligation to update any forward-looking statements to reflect events or circumstances after the date of this report, except as may otherwise be required by the federal securities laws.

We have identified the following important factors that could cause actual results to differ materially from those discussed in our forward-looking statements. Such factors may be in addition to the risks described in Part I, Item 1A. “Risk Factors;” Part II, Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations;” and other parts of this Form 10-K. These factors include: our ability to source semiconductor components and other raw materials used in the manufacturing of our products amidst continued intermittent shortages, including from new and alternative suppliers; our ability to prosecute and defend our proprietary technology aggressively or successfully; our ability to recruit and retain personnel with experience and expertise relevant to our business; our ability to invest in research and development to achieve profitability even during periods when we are not profitable; any disruptions or delays in our supply chains, particularly with respect to semiconductor components, whether resulting from regional or global geopolitical developments, changes imposed by the new U.S. presidential administration, or otherwise; costs and outcomes relating to any disputes, governmental inquiries or investigations, regulatory proceedings, legal proceedings or litigation; our ability to continue to introduce new products in our target markets; our ability to generate revenue growth and positive cash flow, and reach profitability; the strengthening of the U.S. dollar and its effects on the price of our products in foreign markets; the impact of new regulations and customer demands relating to conflict minerals; our ability to obtain a competitive advantage in the wearable technologies market through our extensive portfolio of patents, trade secrets and non-patented know-how; our ability to grow within our targeted markets; the importance of small form factor displays in the development of defense, consumer, and industrial products such as thermal weapon sights, safety equipment, virtual and augmented reality gaming, training and simulation products and metrology tools; the suitability of our properties for our needs for the foreseeable future; and our need to achieve and maintain positive cash flow and profitability.

Overview

Corporate Background and Market Presence

As used herein, the terms “Company,” “we,” “us,” or “our” refer to Kopin Corporation, a Delaware corporation.

Kopin Corporation, a Delaware corporation that was incorporated in 1984 and is headquartered in Westborough, Massachusetts, is renowned for its innovative microdisplay technologies and optical systems, catering to defense, enterprise, industrial, consumer, and medical sectors. Our portfolio, as evidenced by our official website www.kopin.com, includes four types of miniature active-matrix liquid crystal displays (“AMLCDs”), liquid crystal on silicon (“LCOS”) displays, organic light emitting diode (“OLED”) displays, and emerging micro light emitting diode (“MicroLED”) displays, in addition to optics, electronics, and housings for subsystems which we call Application Specific Optical Solutions (“ASOS”). These microdisplays and subsystem solutions are all geared toward enhancing human performance when it matters most – in critical applications.

Within the reporting period, we announced a patent pending fifth-generation MicroDisplay called NeuralDisplay™ which is in development. The display is a bi-directional, human-in-the-loop and AI enabled backplane that can be manufactured into microdisplays using either OLED or MicroLED deposition technology.

While microdisplays are at the heart of everything we make, we also bring value to our customers through the design and manufacture of high-performance subsystems of ASOS which include optics, electronics, and housings that are designed to meet the rigorous performance, size, weight, power, and cost requirements of the applications into which they are used.

These products are critical for applications ranging from weapon mounted thermal sights to spatial computing devices and medical headsets. We have been supplying our microdisplays and ASOS to the U.S. Department of Defense for many years for solider centric systems, rotary and fixed wing aircraft and are developing products for armored vehicles and soldier carried missile systems. Our market reach now extends globally, with significant operations in the Americas, Asia-Pacific, and Europe. This global footprint and strategic focus underscore our capability to serve diverse and demanding markets, particularly in defense, where it supports both U.S. and international customers with development and production programs.

Strategic Initiatives and Recent Developments

Historically, we have focused on selling individual display components, but we have shifted our focus to offering higher-value complete solutions. These solutions integrate displays, optics, and drive electronics into subassemblies or headsets, catering to the growing demand for integrated, application-specific products – our ASOS. This move is supported by our proprietary technologies, which enable the design and manufacture of high-performance, rugged systems. The additional capability in offering complete solutions positions us to better serve our customers by offering a seamless integration of components, ensuring optimal performance and ease of use. This is a critical differentiator, as competitors like Samsung, LG, and Sony, while strong in display manufacturing, do not typically provide integrated subassemblies or headsets, requiring customers to handle the highly complex additional integration which requires complex processes, know-how and trade secrets, and specialized equipment and facilities to do correctly.

Our ability to meet specific customer needs is enhanced by our proprietary technologies, which include over 200 patents and patent applications covering microdisplays, optics, and related systems, providing a significant intellectual property advantage, as noted in recent patent filings. Technological edge allows us to develop products that are not only high-resolution and low power but also rugged enough for defense applications, such as pilot helmets and armored vehicle targeting systems.

The Company’s competitive edge is further strengthened by our focus on application-specific solutions, which cater to the unique requirements of each market segment. For example, in the industrial sector, we license wireless headset reference designs that integrate displays and optics for field service personnel, enhancing productivity. Similarly, in the medical field our stereoscopic 3D high-resolution headset is used by surgeons to provide comfortable and convenient visual support with more comfort and convenience.

ONE Kopin Strategic Initiative and Rebranding

In alignment with our “ONE Kopin” strategic initiative, we have undertaken a strategic initiative to reorganize and streamline our operations. This initiative will include a rebranding effort to unify our corporate identity, and as announced in recent corporate updates, includes the introduction of a new logo, corporate identity, and website, reflecting a modernized brand image.

Our unified business now operates through various market and technology groups, strategically located across multiple sites to support our global operations. These groups are organized by market segments (e.g., defense, industrial, consumer) and technology areas (e.g., AMLCD, FLCOS, OLED, MicroLED), with locations including Westborough, Massachusetts, Dalgety Bay, Scotland, and Reston, Virginia.

In addition to unifying our operations, we have also expanded and unified our sales and business development team, substantially increasing our investment in new customer acquisition, existing customer revenue and margin enhancement, and diversification of our customer base. In the defense, medical and industrial segments that we serve, product development cycles and transitions from development to manufacturing are lengthy. Therefore, maintaining a robust pipeline of active customer-funded development programs that will evolve into production programs is a critical part of growing revenues and expanding our customer base. In conjunction with our portfolio of unique microdisplays and ASOS, we have also invested heavily in our sales and business development group – nearly doubling the resources focused on acquisition of new customers and programs over the past 18 months.

This reorganization is designed to improve coordination and innovation, leveraging the strengths of each division under a single umbrella, and growing and diversify our customer base. Our multiple locations ensure global reach, supporting customers in the Americas, Asia-Pacific, and Europe as these regions become more focused on sovereign defense spending, medical research and semiconductor developments.

Product Portfolio and Technological Edge

Our product lineup is diverse, with four microdisplay technologies inclusive of both off-the-shelf and custom products, as well as complete headset solutions for training & simulation and medical applications, and ASOS sub-systems.

Manufacturing processes vary. For example, AMLCDs are designed in Westborough, then initial manufacturing steps occur in Taiwan and then the product is completed in Westborough, while FLCOS products are handled by our facility in Dalgety Bay, Scotland. Our OLED displays are designed in Westborough, the initial manufacturing occurs in South Korea, then they are completed in Europe or Asia. These displays are sold separately or integrated into subassemblies, including binocular modules and higher-level assemblies (“HLAs”) for defense, used in applications like weapon sights, pilot helmets, and training headsets.

Our development of OLED and MicroLED displays, including color and monochrome variants with capabilities such as NeuralDisplay™ Artificial Intelligent (“AI”) based eye-tracking, signifies our forward-looking approach to deliver new capabilities designed to enhance human performance where and when it matters most. Additionally, we offer display drivers, application-specific integrated circuits (“ASICS”), optical lenses, and backlights, manufactured by third parties, complementing its core offerings.

Revenue Streams and Market Opportunities

Revenue generation derives primarily from the sale of displays, optical components, and Application Specific Optical Solutions (ASOS) that we manufacture for defense, industrial, medical and training and simulation applications, alongside customer-funded development contracts for U.S. defense programs. This dual revenue stream ensures stability and growth potential. Most of the programs designed for these market segments tend to run for extended time periods, yielding multiple years of revenue and margin streams.

We are particularly well-positioned for the emerging augmented reality (AR) and virtual reality (VR) markets, leveraging our technology and intellectual property. Our unique position as the only known USA-based provider offering AMLCDs, LCOS, OLED and MicroOLED Displays, combined with optics, enhances our ability to offer the market the best solution for each unique application, serving customers based on their specific needs. This is a significant competitive advantage for us. The addition of AI Enabled backplane architectures and pending patent applications in this area puts us at the forefront of display technology for consumer and defense applications.

Research and Development Focus

Internally funded research and development is concentrated on advancing OLED, MicroLED, and other display technologies such as bi-directional pixel architectures and software defined, AI enabled backplane architectures. Historically, we have invested in headset systems for emerging industrial and consumer markets, now licensed under agreements that may include royalties and purchase commitments. We believe this licensing strategy results in revenue from past innovations while freeing resources for new developments.

Funded Research and Development

We have entered various development contracts with agencies and prime contractors of the U.S. Government and commercial customers. These contracts help support the continued development of our core technologies. A substantial percentage of our revenue derives from Funded Research and Development, focusing on developing custom product solutions, particularly for the U.S. defense industry. These programs are typically fixed price and span several years, aiming for production orders post-design completion and are cancellable at short notice. The knowledge gained, as per corporate strategy outlines, enhances our expertise, positioning us for future business opportunities. The potential for technologies developed for defense to eventually transition to commercial and consumer applications underscores long-term growth prospects.

Operational Flexibility and Market Adaptability

A key aspect of our operations is our flexibility in sourcing, purchasing, and developing display backplanes and deposition solutions from other companies for integration with proprietary optics and headset designs, particularly in new or cost-sensitive markets. This adaptability ensures competitiveness and responsiveness to market dynamics, geo-political conflicts, tariffs, and US Department of Defense and Asian and European defense requirements for country-of-origin and source of supply requirements.

We have shifted our business development efforts to focus on markets where we have a greater competitive advantage and as a result revenues from defense applications have increased. Sales to significant non-affiliated customers for fiscal years 2024, 2023 and 2022, as a percentage of total revenues, were as follows:

Our fiscal year ends on the last Saturday in December. The fiscal years ended December 28, 2024, December 30, 2023, and December 21, 2022, are referred to herein as fiscal years 2024, 2023 and 2022, respectively.

Augmented and Virtual Reality

Kopin Corporation, a leader in optical solutions, has expressed views on the future of augmented reality (“AR”) and virtual reality (“VR”) in defense, industrial, and consumer sectors. Our opinion on these technologies reflects current market dynamics and technological advancements. The focus is on the adoption trends, necessary technological developments, and the ongoing challenge of balancing performance and cost in display technologies.

Industry Overview and Market Interest

We believe, and current trends support, that defense, industrial, and consumer companies are increasingly integrating AR and VR into their operations, which we believe positions us very well for business expansion given our expertise in these technologies. These technologies are viewed as innovative applications and computing platforms, transforming how sectors operate. For instance:

This widespread interest underscores the potential for AR and VR to become mainstream, but their growth is contingent on several technological advancements.

Necessary Technological Advancements

For AR and VR markets to mature and expand, sustained investment and innovation are required in the following areas:

Our updated opinion reflects a robust and growing interest in AR and VR across defense, industrial, and consumer sectors. The path to widespread adoption hinges on continuous innovation in display technology, optics, application software, and software integration, with a particular emphasis on balancing performance and cost. The integration of advanced bi-directional, human-in-the-loop sensing, coupled with low power, edge node algorithms will also be required to enable the performance requirements for Defense, Consumer and Medical applications.

Our Solution and Technology

Kopin Corporation is a leader in high-performance optical solutions, focusing on microdisplays and related technologies for various markets. We design and manufacture small form factor displays, including AMLCDs, LCOS, OLED, and developing MicroLED, along with optical lenses, backlights, and ASICs. The Company recently invented a fifth generation microdisplay architecture, NeuralDisplay™ which includes bi-directional, human-in-the-loop and AI-based algorithms resident within the backplane of the display. This technological advancement can be utilized with either OLED or MicroLED depositions. These components are used in defense, industrial, medical, and consumer applications, offering complete solutions that include subassemblies and headsets.

Products and Applications

Our displays are critical for near-eye applications, such as thermal weapon sights and pilot helmets in defense, wearable headsets for field service in industry, surgeon headsets in medical fields, and spatial computing devices for consumers. Their subassemblies combine displays, optics, and electronics, designed to survive extreme conditions like weapon fire shock and vibration, while headsets are standalone products, our displays and subsystems are integrated into the finished products built by our customers.

Competitive Edge

A critical aspect of our business is our ability to offer tailored and complete solutions, not just displays, which differentiate us from competitors. We offer active-matrix liquid crystal, organic light emitting diode, ferroelectic liquid crystal on silicon and inorganic light emitting diode microdisplays as stand-alone products and in modules and subassemblies which include our optics and electronics. Furthermore, we believe we are the only USA based, small business that offers five variants of microdisplay technologies which provide a vast array of technological options for customers’ application needs. A “small business” as defined in U.S. procurement may receive preferential treatment in awarding contracts. We can assist customers with choosing and customizing the right display architecture for their unique application as compared to competitors who only offer one technology, for all applications. Specifically, our strategy enables us to design products for rugged environments, a key advantage in defense and industrial markets, while offering these solutions to be manufactured in multiple locations within the USA and Europe.

Detailed Analysis of Kopin Corporation’s Technology and Market Position

Kopin Corporation, a leader in optical solutions, is recognized for our advanced microdisplay technologies and related products, catering to defense, industrial, medical, and emerging consumer AR and VR markets. This analysis, prepared as of March 2025, provides a comprehensive overview of the Company’s technology, products, strategy, and market position. The focus is on detailing the Company’s capabilities, competitive advantages, and potential risks, ensuring a thorough understanding of potential investment decisions.

Corporate Background and Technology Portfolio

We design and manufacture a range of small form factor displays, including AMLCDs, LCOS displays, OLED displays, and are developing MicroLED displays. These displays are complemented by optical lenses, backlights, and ASICs, forming the backbone of our product offerings.

Our technology extends beyond individual components to include subassemblies and headsets, which integrate displays, optics, and electronics. These products are designed to withstand extreme environmental conditions, such as the shock and vibration experienced in weapons fire, making them particularly suitable for defense applications. This capability is a critical differentiator, as it ensures reliability in rugged environments, a key requirement for defense, medical and industrial customers.

Our AMLCDs, branded as CyberDisplay® products, utilize a proprietary process involving the transfer of integrated circuits from silicon wafers to glass. This process, detailed in corporate disclosures, enables greater miniaturization, higher pixel density, lower power consumption, and higher brightness compared to conventional active-matrix LCDs. The manufacturing involves initial steps at foundries in Taiwan, with final assembly at our facility in Westborough, Massachusetts, as noted in recent financial reports.

LCOS displays, manufactured by our subsidiary Kopin Europe Limited (“KEL”) in Scotland, are reflective and used in 3D optical inspection equipment, offering high-speed, high-density imaging capabilities.

OLED displays, with their emissive nature, provide high contrast and fast response times, making them ideal for AR and VR applications. We have recently launched a new OLED display with improved brightness and resolution, aimed at the AR/VR market, as announced in November 2024.

MicroLED displays are in development, promising high brightness, wide viewing angle, excellent contrast, and potentially low cost. We received a patent for our MicroLED manufacturing process in September 2024, which is expected to enhance production efficiency and reduce costs, positioning the Company for future growth in this emerging technology.

NeuralDisplay™ architecture is a software-based development focused on integrating bi-directional sensing into the subpixel of either an OLED or MicroLED display. We believe this patent pending technology will reduce the size, weight, power consumption of consumer and defense AR solutions by reducing several cameras which are required for eye-tracking, gaze, and dynamic brightness and contrast controls. The display system is being designed to utilize software and AI accelerating algorithms to adjust the display image and thereby reduce nausea, latency, and overall system weight which will increase user comfort and battery life.

Product Offerings and Applications

Our products are utilized across multiple sectors, each with specific applications:

Our subassemblies, such as HLAs for defense, combine displays, optics, and electronics in sealed housings, designed for exact tolerances to meet rugged environment requirements. Headsets, on the other hand, are standalone products that interface with larger systems, requiring significant know-how in design, materials selection, assembly, and testing.

Manufacturing and Supply Chain

Our manufacturing process varies by product. AMLCDs involve initial fabrication at Taiwan foundries, with final assembly in Westborough, Massachusetts, using proprietary Wafer Engineering technology. LCOS displays are manufactured at Kopin Europe Limited in Scotland, ensuring localized production capabilities. For OLED displays, we design the critical backplane and outsource manufacturing to foundries, adopting a fabless model to reduce capital costs and leverage existing infrastructure with best of class manufacturing partners globally.

Optical lenses and backlights are either developed internally or licensed, with third-party manufacturing used to meet specifications. This approach reduces investment in plants and equipment, allowing us to stay agile and adapt to technological advancements.

Our ASOS products are currently manufactured using a significant amount of direct labor. However, we have implemented initiatives to automate many of the processes required to manufacture the products. For example, we removed human defect inspection of lenses and changed the process to use camera inspection.

Strategy and Market Expansion

Our strategy is centered on participating in U.S. defense development programs, funded by government agencies and prime contractors, to develop leading-edge microdisplay technologies. This approach supplements internal R&D budgets and enhances expertise, with revenues from these contracts contributing significantly to past years.

We also utilize Small Business Innovation Research (“SBIR”) and Cooperative Research & Development Awards (“CRADA”) to work with Defense end-users directly to learn, develop, demonstrate, and commercialize new technologies.

The knowledge gained is leveraged for industrial, medical, and consumer applications, aiming to diversify revenue streams. We maintain a broad intellectual property portfolio, with approximately 200 patents and patent applications, covering microdisplays, optics, and related technologies, which we believe provides a technology and manufacturing platform competitive advantage.

We are also developing software-defined backplanes with AI capabilities, known as NeuralDisplay™, to address specific use cases in defense and consumer markets, indicating a forward-looking approach to innovation, as mentioned in recent product development updates.

Markets, Customers, and Financial Performance

Our primary market is defense, with significant customers including Collins Aerospace and DRS Network & Imaging Systems LLC. In fiscal year 2024, defense sales (excluding R&D contracts) accounted for 82% of total revenue, up from 56% in 2023 and 52% in 2022, indicating a strong reliance on this sector. These results were a by-product of an intentional strategic shift in market focus, which we believe is already proving successful.

Industrial and medical markets are growing, with customers like HMDmD, expanding our customer base. Research and development revenues, primarily from U.S. Government contracts, accounted for 12% of total revenues in 2024, down from 33% in 2023 and 30% in 2022, suggesting a shift from research and development to low-rate initial production (“LRIP”) sales.

Financially, we reported a 25% revenue increase in fiscal year 2024 compared to 2023, driven by defense product sales, and are progressing towards profitability with a reduced net loss, indicating operational improvements, as noted in market analyses.

Competition and Risks

The general commercial display market is highly competitive, and we face competition from large Asian electronics companies such as AUO, BOE Technology Group, Himax, LG Display, Samsung, Sharp, and Sony in the near eye microdisplay sector. We cannot be certain that we will be able to compete against these companies and technologies, or that consumers will accept the use of such eyewear in general or our customers’ product form factor specifically.

The Company differentiates itself from its competitors by offering a USA small business, designed and built, complete solutions, including displays, optics, and electronics such as MicroLED, OLED, LCOS and AMLCD, that are tailored to application specific solutions. Furthermore, the Company is the only USA based, small business which offers five variants of microdisplay technologies, which provide a vast array of technological options for customers’ application needs. The Company can assist customers to choose the right display architecture for the application versus competitors who only offer one technology for all applications. Specifically, the Company’s strategy enables it to design products for rugged environments, a key advantage in defense and industrial markets, while offering these solutions to be manufactured in multiple locations within the USA and Europe.

Key risks include dependence on major customers, such as DRS Network & Imaging Systems LLC comprising 65% of revenues in 2024 and therefore posing a concentration risk. The need for continuous innovation in a rapidly evolving technology market and managing complex supply chains to maintain high production yields for defense subassemblies are additional challenges.

Recent Developments and Future Outlook

Recent developments include a partnership with a major defense contractor in January 2025 for advanced microdisplays, enhancing its defense market position. The launch of a new OLED display in November 2024 and the MicroLED manufacturing patent in September 2024 further strengthen its AR/VR market potential, along with several noted updates on the emerging NeuralDisplay™ architecture development.

A strategic aspect with regards to geopolitical uncertainties, potential tariffs and sovereign sources of supply for US DoD and European DoD, is our flexibility in manufacturing, using third-party foundries for OLED and MicroLED displays, which reduces capital expenditure and allows for scalability, a strategy not always highlighted in standard overview.

Patents, Proprietary Rights and Licenses

An important part of our product development strategy is to seek, when appropriate, protection for our products and proprietary technology using various U.S. and foreign patents and contractual arrangements. We intend to prosecute and defend our proprietary technology aggressively. Many of our U.S. patents and applications have counterpart foreign patents, foreign patent applications or international patent applications through the Patent Cooperation Treaty. Although we believe that our patents or other proprietary products and processes do not infringe upon the intellectual property rights of any third parties, third parties may assert infringement claims against us from time to time.

Human Capital Resources

As of December 28, 2024, our consolidated business employed 181 full-time employees. Of these employees, 3 hold Ph.D. degrees in Material Science, Electrical Engineering or Physics. Our management and professional employees have significant prior experience in semiconductor materials, device transistor and display processing, optical design, manufacturing, and other related technologies. Our employees are in the U.S. and Europe and the laws regarding employee relationships are different by jurisdiction. None of our employees are covered by a collective bargaining agreement. We have policies to prevent discrimination based on gender, race, ethnicity, nationality, religion, sexual orientation, gender identity or gender expression. We take affirmative action to ensure that applicants are hired, and that employees are treated during employment without regard to their race, ethnicity, religion, sex, or national origin. We also take affirmative action to employ and advance veterans in employment. We consider relations with our employees to be good.

In 2004, we finalized and adopted a Code of Business Conduct and Ethics regarding the standards of conduct of our directors, officers and employees. The code is reviewed and updated periodically by our Board of Directors and is available on our website at www.kopin.com.

Environmental, Social & Governance (ESG) Initiatives

We strive to create and maintain a working environment that fosters honesty and hard work and rewards all of our employees’ hard work. We endeavor to make Kopin Corporation a place people are proud to be associated with. With the growing awareness of environmental and social issues, we are in the process of creating a more formalized ESG strategy. Our initial process for strategy creation includes work by a cross-functional ESG team of leaders representing operations, human resources, supply chain, finance, marketing, and facilities departments. We also utilize third-party facilities, environmental and legal consulting services. These third-party consultants are assisting us in creating an ESG materiality assessment from which we can develop a baseline assessment for monitoring our progress. Our progress in creating our ESG strategy and other related activities are reported to the Board of Directors.

We provide recurring company-wide communication of our formalized values, a summary of which are:

We are not a member of the Responsible Business Alliance (“RBA”); however, we have utilized the themes of the RBA Code of Conduct to supplement our Code of Ethics, including the RBA Code of Conduct’s five critical areas of corporate social responsibility: labor, health and safety, environment, management systems, and ethics. We believe that by following the values noted above and doing our part in each of these areas, we can achieve our business objectives and long-term stockholder value. For additional information, see “Item 1 – Business: Human Capital Resources” in this Form 10-K.

We strive to create a workplace based on the following principles and goals:

Care for Our People

● We believe in upholding the principles of human rights, worker safety, and observing fair labor practices within our organization.

● We respect different viewpoints and perspectives, and ultimately individual thoughts create innovation and achieve better results. We continually evaluate how we provide organizational training, formalize company values, and revitalize recruitment strategy.

● We are committed to employee safety. We have installed safety protocols and monitoring systems. We have periodic audits by third parties to test our systems and perform preventive maintenance. Our policies prohibit an employee from being alone in our production facilities or in unsupervised areas of our facilities.

Environmental Responsibility

● We are committed to protecting the natural environment and our community by complying with all applicable legal and regulatory requirements. We maintain an environmental management system and a specific framework for implementing relevant sustainable practices.

● We ask our employees to help us contribute towards environmental sustainability by looking for opportunities to conserve energy, reduce consumption of natural resources, preserve air and water quality, manage waste properly, reuse and recycle, and reduce the use of toxic substances in our operations where possible, including, in particular, in our clean room and lab facilities. Our clean room facility emissions are less than permitting and reporting thresholds, and we track emissions monthly to verify compliance with the regulations.

● We look for ways to reduce energy consumption in our facilities around the world, including upgrades and/or retrofits to smart heating, ventilation, and air conditioning systems. For instance, we have installed variable speed fans, which only turn on based on various metrics, thereby reducing energy usage.

Ethics & Corporate Responsibility

● We are committed to ensuring ethical organizational governance and embracing diversity and inclusion in the board room and throughout the organization.

● We are committed to observing fair, transparent, and accountable operating practices.

● We seek to create and foster a healthy, balanced, and ethical work environment for everyone in our organization. To this end, we promote an ethical organizational culture and encourage all employees to raise questions or concerns about actual or potential ethical issues and Company policies and to offer suggestions about how we can make our organization better. We have a Whistleblower Ethics Hotline that includes global telephone access and online access. We have an independent third party periodically test the Whistleblower Ethics Hotline.

Supply Chain Responsibility

● We intend to request that our suppliers adhere to the RBA Code of Conduct or its equivalent by flowing this requirement through our commercial contracts.

● We also adhere to Rule 13p-1 under the Exchange Act and support efforts to avoid sourcing conflict minerals that directly or indirectly finance or benefit armed groups in the Democratic Republic of Congo and in adjoining countries. Consistent with the Organization for Economic Co-operation and Development Due Diligence Guidance concerning conflict minerals, we adopted the Conflict-Free Sourcing Initiative Due Diligence reporting process and seek to obtain conflict minerals content declarations from our suppliers each year, all in an effort to promote supply chain transparency. We do not directly source tin, tantalum, tungsten, or gold (collectively referred to as 3TG) from mines, smelters or refiners, and we are in most cases several or more levels removed from these supply chain participants.

Government Regulations

Our business is subject to extensive regulation in the industries we serve. We deal with numerous U.S. Government agencies and entities, including but not limited to branches of the Department of Defense (“DoD”).

U.S. defense contractors are among our largest customers, representing a substantial majority of our total revenues. The U.S. Government may terminate a contract with us or our customers either “for convenience” (for instance, due to a change in its perceived needs) or if we default due to our failure or the failure of a general or subcontractor to perform under the contract. If the federal government terminates a contract with one of our customers, our contract with our customers would entitle us to recover only our incurred or committed costs, settlement expenses and possibly profit on the work completed prior to termination. However, under certain circumstances, our recovery costs upon termination for convenience of such a contract may be limited. If terminated by the government because of our default, we could be liable for payments made to us for undelivered goods or services, additional costs the government incurs in acquiring undelivered goods or services from another source, and any other damages it suffers.

In addition, we are subject to a variety of federal, state and local governmental regulations including the use, storage, discharge and disposal of toxic, volatile or otherwise hazardous chemicals used in our manufacturing process. Failure to comply with present or future regulations could result in fines being imposed on us, suspension of production or cessation of operations. Any failure on our part to control the use of, or adequately restrict the discharge of hazardous substances, or otherwise comply with environmental regulations, could subject us to significant future liabilities. We also cannot be certain that past use or disposal of environmentally sensitive materials in conformity with the existing environmental laws and regulations will protect us from required remediation or other liabilities under current or future environmental laws or regulations. Certain chemicals we import are subject to regulation by the U.S. Government. If we or our suppliers do not comply with applicable laws, we could be subject to adverse government actions and may not be able to import critical supplies.

The costs, burdens, and/or impacts of complying with federal and state regulations could be an expensive and time-consuming process, and failure to comply with any such legal requirements could have a significant impact on our financial position, results of operations, and cash flows.

We are also subject to federal International Traffic in Arms Regulations (“ITAR”) laws which regulate the protection (cybersecurity) and export of technical data and export of products to other nations that may use such data or products for defense purposes. Cybersecurity and data security and protection laws and regulations are evolving and present increasing compliance challenges, which may increase our costs, affect our competitiveness, cause reputational harm, and expose us to substantial fines or other penalties. Failure to comply with present or future regulations could result in fines being imposed on us, suspension of production, or a cessation of operations. Any failure on our part to obtain any required licenses for the export of technical data and/or export of our products, or to otherwise comply with ITAR, could subject us to significant future liabilities.

We are also subject to federal importation laws that regulate the importation of raw materials and equipment from other nations that are used in our products. Failure to comply with present or future regulations could result in fines being imposed on us, suspension of production, or a cessation of operations.

Investments in Related Businesses

On September 30, 2019, we entered into an Asset Purchase Agreement with Solos Technology Limited (“Solos Technology”), pursuant to which we sold and licensed certain assets of our Solos product line and Whisper Audio (“Whisper”) technology. As consideration for the transaction, we received 1,172,000 common shares representing a 20.0% equity stake in Solos Technology’s parent company, Solos Incorporation (“Solos Inc.”). Our 20.0% equity stake will be maintained until Solos Inc. has raised a total of $7.5 million in equity financing after which we will need to participate in future equity offerings, or our ownership percentage will be diluted.

We acquired an equity interest in Lenovo New Vision in the first quarter of 2018 for $1.0 million and the contribution of certain intellectual property. As of December 28, 2024, we have approximately 10% interest in this investment and the carrying value of our investment is $1.5 million.

We acquired a right to an equity interest in a medical device company in 2021. As of December 28, 2024, the carrying value of this investment is $0.3 million.

As of December 28, 2024, we own 100% of the outstanding common stock of Kopin Virginia, Inc. (formerly NVIS, Inc), KEL, and e-MDT America Inc. (“eMDT”) and we consolidate each of their financial results within our consolidated financial statements.

We terminated operations of our subsidiary, Kopin Software Ltd., in the third quarter of 2019 and are in the process of liquidating it.

On January 5, 2023, the Company entered into a Technology License Agreement and an Asset Purchase Agreement (the “LST Agreements”) with Lightning Silicon Technology, Inc (“LST”). Pursuant to the LST Agreements, the Company issued a license to LST for certain technology associated with our Organic Light Emitting Technology, transferred in-process development contracts with two customers and accounts receivables that the Company had previously determined were not collectible. As consideration for the transaction, the Company received 18,000,000 common shares representing a 20.0% equity stake in LST. The Technology License agreement provides for Kopin to transfer certain patents to Lightning Silicon if they achieve certain milestones, however upon transfer Kopin will receive a license to the technology. The Company will also receive a royalty based on unit sales of products that utilize the technology licensed.

We may from time to time make further equity investments in these and other companies engaged in certain aspects of the display, electronics, optical and software industries as part of our business strategy. In addition, the wearable computing product market is relatively new and there may be other technologies we need to invest in to enhance our product offering. These investments may not provide us with any financial return or other benefit, and any losses by these companies or associated losses in our investments may negatively impact on our operating results.

Sources and Availability of Raw Materials and Components

We rely on third-party independent contractors for certain integrated circuit chip sets, backlights and other critical raw materials such as special glasses, wafers and chemicals. In addition, our CyberDisplay subassemblies, HLAs, binocular display modules, and other modules include lenses, backlights, printed circuit boards and other components that we purchase from third-party suppliers. Some of these third-party contractors and suppliers are small companies with limited financial resources. In addition, our defense customers typically buy a small number of units, which prevents us from qualifying and buying components economically from multiple vendors. As a result, we are highly dependent on the select number of third-party contractors and suppliers.

Availability of Information

We make available free of charge through our website, www.kopin.com, our Annual Reports on Form 10-K and other reports that we file or furnish with the SEC as soon as reasonably practicable after they are filed or furnished, as well as certain of our corporate governance policies, including the charters for the Board of Directors’ audit, compensation, and nominating and corporate governance committees and our code of ethics, corporate governance guidelines and whistleblower policy. We will also provide any person without charge, upon request, a copy of any of the foregoing materials. Any such request must be made in writing to us, c/o Investor Relations, Kopin Corporation, 125 North Drive, Westborough, MA, 01581.

We operate in a changing global environment that involves numerous known and unknown risks and uncertainties that could materially adversely affect our financial condition, results of operations, cash flows, and competitive position. Accordingly, our business and financial results are subject to a number of risks and uncertainties, including those set forth below. Additional risks and uncertainties that are not currently known to us or that we currently do not believe to be material may also negatively affect our business and financial results. The risk factors set forth below describe what we believe to be the material risks and uncertainties related to our financial condition, results of operations, cash flows, and competitive position. We have included the risk factors below without any reflection on the relative importance of, or likelihood of, any particular risk factor.

We have experienced a history of losses, have a significant accumulated deficit, have had negative cash flow from operating activities in fiscal years 2024, 2023, and 2022, and expect to have negative cash flow from operating activities in fiscal year 2025. Since inception, we have incurred significant net operating losses. As of December 28, 2024, we had an accumulated deficit of $402.0 million. At December 28, 2024 and December 30, 2023, we had $36.6 million and $17.9 million of cash and cash equivalents, including restricted cash, and marketable securities, respectively. For the years 2024 and 2023, net cash used in operating activities was $14.2 million and $15.3 million, respectively. The increase in our cash and cash equivalents and marketable securities is primarily due to gross proceeds of $33.9 million received from the sale of 43.0 million shares of common stock and the pre-funded warrants to purchase up to 4,000,000 shares of common stock at a public offering price of $0.65 per share. We have accrued $24.8 million for a litigation issue and as a result we have concluded that there is substantial doubt about our ability to continue as a going concern within one year following the issuance of this annual report. We plan to continue to invest in research and development even during periods when we are not profitable, which may result in our incurring losses from operations and negative cash flow. If we do not soon achieve and maintain positive cash flow and profitability, our financial condition will ultimately be materially and adversely affected, and we will be required to raise additional capital. We may not be able to raise any necessary capital on commercially reasonable terms or at all. If we fail to achieve or maintain profitability on a quarterly or annual basis within the timeframe expected by investors, the market price of our common stock may decline.

Raising additional funds by issuing securities may cause dilution to our existing stockholders or restrict our operations. To the extent that we raise additional capital by issuing equity securities, the share ownership of existing stockholders will be diluted. The terms of any financing may adversely affect the holdings or the rights of our stockholders and the issuance of additional securities, whether equity or debt, or the possibility of such issuance, may cause the market price of our shares to decline. We may sell shares or other securities in other offerings at a price per share that is less than the prices per share paid by other investors, and investors purchasing shares of our common stock or other securities in the future could have rights superior to existing stockholders. The sale of additional equity or convertible securities would dilute all of our stockholders, and the terms of these securities may include liquidation or other preferences that adversely affect our existing stockholders.

Management has identified material weaknesses in our internal controls over financial reporting, and we may be unable to develop, implement and maintain appropriate controls in future periods.

The Sarbanes-Oxley Act of 2002 and SEC rules require that management annually report on the effectiveness of our internal control over financial reporting and our disclosure controls and procedures. As more fully described within Item 9A, “Controls and Procedures,” of this Form 10-K, in the fourth quarter of 2024 management identified material weaknesses in internal control over financial reporting. As a result, our Chief Executive Officer and Chief Financial Officer concluded that our internal controls over financial reporting were not effective as of December 28, 2024. The specific material weaknesses are described in Part II - Item 9A. “Controls and Procedures” of this 2024 Form 10-K in “Management’s Report on Internal Control over Financial Reporting.” A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim consolidated financial statements would not be prevented or detected. We cannot assure you that additional material weaknesses in our internal control over financial reporting will not be identified in the future. Any failure to maintain or implement required new or improved controls, or any difficulties we encounter in their implementation, could result in additional material weaknesses, or could result in material misstatements in our financial statements, which could cause us to fail to meet our reporting obligations or cause investors to lose confidence in our reported financial information, leading to a decline in our stock price. The material weaknesses did not result in any identified misstatements to the December 28, 2024, audited financial statements, nor with respect to the financial statements for any previously reported period.

We are in the process of developing and implementing our remediation plan for the identified material weaknesses, and we expect that this work will continue in 2025. There can be no assurance, however, as to when the remediation plan will be fully developed, when it will be fully implemented and/or the cost of its implementation. Until our remediation plan is fully implemented, we will continue to devote significant time and attention to these efforts. If we do not complete our remediation in a timely fashion, or at all, or if our remediation plan is inadequate, there is a risk that we will be unable to timely file future periodic reports with the SEC and/or that our future financial statements could contain undetected errors. Until the remediation plan is complete and implemented, we will rely upon additional interim control procedures prescribed by management, including the utilization of manual mitigating control procedures to help ensure that we fairly state our financial statements in all material respects. However, the establishment of these interim controls does not provide the same degree of assurance as a fully remediated control environment. For more information relating to our internal control over financial reporting and disclosure controls and procedures, and the remediation plan that we have undertaken, see Part II - Item 9A. “Controls and Procedures” of this 2024 Form 10-K.

We may be unable to manufacture our products cost effectively to meet contractual specifications or customer requirements. Our products are required to meet specifications agreed to in purchase orders and related agreements with our customers. Our ability to produce products which meet these specifications is dependent on a number of factors including but not limited to our manufacturing processes and our vendors providing raw materials that meet the specifications we have agreed to with them. In addition, while there may be agreement with our customers on the specifications there may be ambiguity with the method to measure compliance with meeting the specifications. When we commence production of new products, we normally go through a period of low production efficiency as we modify our production processes for higher volume output and train more production employees on how to make the product. Low production efficiency means that the cost to make the product is more than what we anticipated when we accepted the purchase order from the customer. In addition, after we commence selling our products customers may request changes to the products which may also result in the low production efficiency starting again. We currently have several new products and new product configurations going to production. If the products we deliver are found to have undetected defects or latent defects when we ship them, we may incur the cost to recall the products. Product recalls and product liability and warranty claims can result in significant damages and costs, including fines, as well as other harm to our business. If we are unable to manufacture our products cost effectively, our revenue and ability to obtain profitability will be adversely affected.

Our revenues and cash flows could be negatively affected if sales of our display products for defense applications significantly decline or the current defense development programs are either cancelled or ultimately do not result in future product sales. The sale of our display products to the military for use in thermal weapon sights and avionic helmets has been a primary source of our defense revenues and cash flows over the last several years. We currently are included in the Family Weapon Sight (“FWS”) Individual program and the Joint Strike Fighter (F-35) jet fighter program. In 2023 and 2024, we experienced quality issues with the products we supplied for the FWS-I program. These quality issues resulted in suspension of shipments to our customer at various times during 2023 and 2024 as we made modifications to our production processes. We are continuing to make modifications to our production processes as we resolve certain issues. We are in development and qualification of additional defense programs related to avionic helmets, armored vehicles and soldier rifle scopes. Our ability to generate revenues and cash flow from sales to the U.S. military and our customers depends on our Display products remaining qualified in the F-35 Joint Strike Fighter, FWS and other U.S. defense programs, our customers continuing to serve as the suppliers for those programs, and on the U.S. Government/military funding these programs. We may not be awarded contracts for the systems we are in qualification for, and for the systems we are qualified for, we may only be awarded a portion of the program as the U.S. military looks to have multiple sources when possible. Even if our products qualify for these programs, the U.S. Government can opt to change suppliers, in which case demand for our products could be negatively affected. In addition, the government could postpone or cancel these programs. We believe the DoD is evaluating alternative display technologies for the F-35 Strike Fighter program and other defense programs, and we will need to develop and qualify any replacement display technologies. Our ability to generate revenues and cash flow from sales to the U.S. military also depends on winning contracts over our competitors. If we are unable to be qualified into new U.S. defense programs, remain qualified in existing programs, or win orders against our competition, or if defense programs are not funded, then our ability to generate revenues and achieve profitability and positive cash flow will be materially and negatively impacted.

A decline in the U.S. Government defense budget, changes in spending or budgetary priorities, a prolonged U.S. Government shutdown or delays in contract awards may significantly and adversely affect our future revenues, cash flow and financial results. In addition to the Anti-Deficiency Act, in recent years U.S. Government appropriations have been affected by larger U.S. Government budgetary issues, including reductions or shifts in the capital resources or government funding, and related legislation. As a result, DoD funding levels have fluctuated and have been difficult to predict. Future spending levels are subject to a wide range of factors, including Congressional action and changes to governmental policies and programs, including loans, grants, guarantees and other subsidies, and changes to government spending policies, including shifts in funding priorities. In addition, in recent years the U.S. Government has been unable to complete its budget process before the end of its fiscal year, resulting in both a government shutdown and continuing resolutions to extend sufficient funds only for U.S. Government agencies to continue operating. Most recently, the federal government was shut down due to a lack of funding for over one month between late 2018 and early 2019. Additionally, the national debt has recently threatened to reach the statutory debt ceiling in 2024, and such an event in future years could result in the U.S. Government defaulting on its debts.

As a result, defense spending levels are difficult to predict beyond the near term due to numerous factors, including the external threat environment, future government priorities and changes to funding of government agencies, and the state of government finances. Significant changes in defense spending or changes in U.S. Government priorities, policies and requirements could have a material adverse effect on our results of operations, financial condition or liquidity.

Most of our defense sales are on a fixed-price basis, which could subject us to losses if there are cost overruns. Under a fixed-price contract, we receive only the amount indicated in the contract, regardless of the actual cost to produce the goods. While firm fixed-price contracts allow us to benefit from potential cost savings, they also expose us to the risk of cost overruns. If the initial estimates that we use to calculate the sales price and the cost of performing the work prove to be incorrect, we could incur losses. We have had situations where we have underestimated the cost of a program and incurred losses in fulfilling the contract. As discussed above, we are seeing a global shortage of semiconductors and other raw materials which is resulting in a significant increase in some raw material prices. In addition, the U.S. recently experienced inflation levels not seen in many years which drove higher labor costs and there is an expectation that tariffs may result in additional inflation in the future. Some of our contracts have specific provisions relating to cost, scheduling, and performance. If we fail to meet the terms specified in those contracts, then our cost to perform the work could increase, which would adversely affect our financial position and results of operations. Some of the contracts we bid on have Indefinite Delivery, Indefinite Quantity (“IDIQ”) provisions. This means we are bidding a fixed price but are not assured of the quantity the government will buy or when it will buy during the term of the contract. This means we are exposed to the risk of price increases for labor, overhead and raw materials during the term of the contract. We may incur losses on fixed-price and IDIQ contracts that we had expected to be profitable, or such contracts may be less profitable than expected, which could have a material adverse effect on our business, financial condition, results of operations, and cash flows.

Our investments in the development and sale of OLED microdisplays may not be successful, which may materially adversely affect our sales, profitability and cash flow. Historically, we have sold products that incorporate our proprietary AMLCDs. We believe that for certain applications, OLED microdisplays have performance advantages and we have received future display product needs from some customers that plan to switch from AMCLDs to OLED microdisplays in the next two to three years. We are in the process of designing and developing OLED microdisplays and establishing foundry relationships to manufacture them. We expect to make additional monetary investments in their commercialization, though our plan is to outsource their production. We have little experience in production outsourcing. If we are unsuccessful in designing and developing OLED microdisplays or if we are unable to find cost-effective third-party production partners, our sales and profitability may be negatively affected.

Changes in government trade policies may increase the cost of our products, which may materially adversely affect our sales or profitability. We depend on a Taiwanese foundry for the manufacture of integrated circuits for our AMLCD display products and on Chinese, Korean, and European foundries for our OLED display products. In recent years the U.S. has imposed, among other actions, new or higher tariffs, including those that have been or may be imposed by the new presidential administration in the U.S. on specified imported products originating from China in response to what it characterizes as unfair trade practices, and China has responded by proposing or implementing new or higher tariffs on specified products imported from the U.S. Tariffs on components that we import from China or other nations that have imposed, or may in the future impose, tariffs have in some cases and may in the future cause our expenses to increase, which would adversely affect our profitability unless we were able to exclude our products from the tariffs or we raise prices for our products, which may result in our products becoming less attractive relative to products offered by our competitors. In addition, future actions or escalations by either the U.S. or China that affect trade relations may also affect our business or that of our suppliers or customers, and we cannot provide any assurances as to whether such actions will occur or the form that they may take. Moreover, it is uncertain to what extent, if any, the U.S. tariffs on components that we import from China will affect the Taiwanese foundries on which we depend, in part because many Taiwanese foundries conduct parts of their manufacturing in China. Kopin has completed and continues to transition several OLED device deposition steps to European supply chain partners for U.S. DoD source of supply requirements and duplicity to reduce the risk of Chinese supply and potential tariffs.

A protectionist trade environment in either the U.S. or those foreign countries in which we do business, such as a change in the current tariff structures, export compliance or other trade policies, may materially adversely affect our ability to sell our products in foreign markets. To the extent that our sales or profitability are affected negatively by any such tariffs or other trade actions, our business and results of operations may be materially adversely affected.

Our business and financial performance may be adversely affected by cyber-attacks on information technology infrastructure and products, as well as changes in cybersecurity and if our information technology security systems were infiltrated and confidential and/or proprietary information were taken, we could be subject to fines, lawsuits and loss of customers. Significantly larger organizations with much greater resources than us have been the victim of cybercrimes. We routinely receive emails probing our Internet security, and our Internet security systems have detected outside organizations attempting to install Trojan virus software packages in our systems. We rely on our electronic information systems to perform routine transactions to run our business. We transact business over the Internet with customers, vendors and our subsidiaries and have implemented security measures to protect against unauthorized access to this information. We have also implemented security policies that limit access via the Internet from the Company to the outside world based on the individual’s position in the Company. We routinely receive security patches from software providers for the software we use. Our primary concerns are inappropriate access to personnel information, information covered under the International Traffic in Arms Regulation, product designs and manufacturing information, financial information and our intellectual property, trade secrets and know-how. Our business may be impacted by disruptions to our own or third-party information technology (IT) infrastructure, which could result from, among other causes, cyberattacks on or failures of such infrastructure or compromises to its physical security. Cybersecurity threats are continuously evolving and include, but are not limited to, both attacks on our IT infrastructure and attacks on the IT infrastructure of our customers, suppliers, subcontractors and other third parties with whom we do business routinely, both on premises and in the cloud, attempting to gain unauthorized access to our confidential, proprietary, or otherwise protected information, classified information, or information relating to our employees, customers and other third parties, or to disrupt our systems or the systems of third parties. We are also exposed to the risk of insider threat attacks. Any such attacks could disrupt our systems or those of third parties, impact business operations, result in unauthorized release of confidential, proprietary, or otherwise protected information, and corrupt our data or that of third parties. The threats we face are continuously evolving and vary in degree of severity and sophistication. These threats include advanced persistent threats from highly organized adversaries, including but not limited to cyber criminals, nation states and so-called hacktivists, particularly those adverse to the security interests of the U.S. and its allies, which target us and other defense contractors. These types of threats are related to the geopolitical environment and have, therefore, grown in number due to recent geopolitical conflicts. In addition, because of the rapid pace of technological change, we and our customers, suppliers, subcontractors and other third parties with whom we conduct business continue to rely on legacy systems and software, which can be more vulnerable to cyber threats and attacks. Moreover, we, like other companies, see an unprecedented number of previously unknown vulnerabilities, for which there are no known mitigations being revealed by new attacks. Further, the sophistication, availability and use of artificial intelligence by threat actors present an increased level of risk. Due to the evolving threat landscape, we have experienced and expect to continue to experience more frequent and increasingly advanced cyber-attacks. In addition, changes in domestic and international cybersecurity-related laws and regulations have expanded cybersecurity-related compliance requirements, and cybersecurity regulatory enforcement activity has grown. We expect the regulatory environment to continue to evolve, and staying apace with these regulatory changes could increase our operational and compliance expenditures and those of our suppliers, and lead to new or additional information technology and product development expenses. We also face reputational, litigation and financial risks in relation to potential required disclosures and increased risk of enforcement. We continue to make investments and adopt measures designed to enhance our protection, detection, response, and recovery capabilities, and to mitigate potential risks to our technology, products, services and operations from potential cybersecurity threats, as well as to comply with evolving regulations. However, given the unpredictability, nature and scope of cyber-attacks, it is possible that we are unable to defend against all cyber-attacks, that potential vulnerabilities could go undetected and persist in the environment for an extended period, or that we may otherwise be unable to mitigate customer losses and other potential consequences of these attacks. In some cases, we must rely on the safeguards put in place by our customers, suppliers, subcontractors and other third parties to protect against and report cyber threats and attacks. We could potentially be subject to production downtimes, operational delays, other detrimental impacts on our operations or ability to provide products and services to our customers, the compromise of confidential information, intellectual property or otherwise protected information, misappropriation, destruction or corruption of data, security breaches, other manipulation or improper use of our or third-party systems, networks or products, financial losses from remedial actions, loss of business, or potential liability, penalties, fines and/or damage to our reputation. Any of these could have a material adverse effect on our competitive position, results of operations, financial condition or liquidity. Due to the evolving nature of such risks, the impact of any potential incident cannot be predicted.

Our investments in the development and sale of OLED microdisplays may not be successful, which may materially adversely affect our sales, profitability and cash flow. Historically, we have sold products that incorporate our proprietary AMLCDs. We believe that for certain applications OLED microdisplays have performance advantages and we have received future display product needs from some customers that plan to switch from AMCLDs to OLED microdisplays in the next two to three years. We are in the process of designing and developing OLED microdisplays and establishing foundry relationships to manufacture them. We expect to make additional monetary investments in their commercialization, though our plan is to outsource their production. We have little experience in production outsourcing. If we are unsuccessful in designing and developing OLED microdisplays or if we are unable to find cost-effective third-party production partners, our sales and profitability may be negatively affected.

Supply shortages have and could continue to impair the quality, reduce the availability or increase the cost of raw materials, which could harm our business. We rely on third-party independent contractors for certain integrated circuit chip sets, backlights, and other critical raw materials such as special glasses, wafers, and chemicals. Lead times for the parts and components that we order vary significantly and depend on factors such as manufacturing cycle times, manufacturing yields, and the availability of raw materials used to produce the parts or components. The semiconductor industry has been and continues to experience a shortage of semiconductor components. We have experienced intermittent shortages of raw materials, which has affected our ability to manufacture and ship units. These shortages have also resulted in an increase in the cost of raw materials and semiconductor components. Our products sold for defense applications go through an expensive and long qualification period before the government will accept the products. Once the product for a defense application is accepted there are restrictions on our ability to substitute a different raw material or component for the one used in the qualification of the product. If these shortages were to further affect our supply of raw materials, our ability to manufacture and distribute our products could continue to be adversely affected, which in turn would adversely affect our results of operations or financial condition.

Geopolitical tensions and any conflicts resulting therefrom may negatively affect our ability to source materials and components required to manufacture our products. We depend principally on a Taiwanese foundry for the fabrication of integrated circuits for our AMLCD defense display products. We use a Chinese foundry for the deposition process in creating our OLED displays. Our reliance on these foundries involves several risks, including reduced control over availability, capacity utilization, delivery schedules, manufacturing yields, and costs. Geopolitical changes in China-Taiwan or China-U.S. relations could disrupt these foundries’ operations and cause these risks to materialize, which would adversely affect our ability to manufacture our display products. If these foundries were to become unable to provide the required capacity, services or quality on a timely basis due to a military or other form of conflict, geopolitical tensions, including in Ukraine, the Middle East, China, Taiwan and other regions, financial market volatility and disruption, inflationary concerns, changes in tax laws and regulations, interest and currency exchange rates, uncertain economic conditions in the United States and abroad, and additional tariffs, including those imposed or that may be imposed by the new presidential administration in the U.S., or other reasons relating thereto, we may not be able to manufacture and ship our display products, or we may be forced to manufacture them in limited quantities until replacement foundry services can be obtained. Furthermore, we cannot assure that we would be able to establish alternative manufacturing and packaging relationships on acceptable terms or at all.

We are in the process of transitioning from using a Chinese deposition foundry to a European foundry for certain OLED products for defense applications. We depend principally on a Chinese foundry for the deposition process in creating our OLED displays but we are in the process of having the deposition process performed by a European foundry. If we are unsuccessful in executing our transition plan or if the transition is significantly delayed, our ability to manufacture and distribute our products could continue to be adversely affected, which in turn would adversely affect our results of operations or financial condition.

Our business, results of operations and financial condition could be adversely affected by events beyond our control, such as natural disasters, public health crises, political crises, negative global climate patterns, or other catastrophic events. Our business and operations, or those of our suppliers, could be negatively affected by various events beyond our control, including, without limitation, natural disasters, such as hurricanes, tornadoes, floods, earthquakes, extreme cold events and other adverse weather conditions; political crises, such as terrorist attacks, war, labor unrest, and other political instability (including, without limitation, the ongoing conflicts between Russia and Ukraine and Israel and Hamas); negative global climate patterns, or other catastrophic events, such as fires or other disasters occurring at our suppliers’ manufacturing facilities, whether occurring in the United States or internationally; and public health crises, such as pandemics, epidemics, or any other public health crisis that results in economic and trade disruptions, including the disruption of global supply chains. These events could disrupt areas in which our offices, suppliers, customers, distribution centers, and warehouses are located, as well as the operations of our global supply chain and those of our third-party partners. Furthermore, these types of events could negatively impact consumer spending in the impacted regions or, depending upon the severity, globally. To the extent any of these events occur, our operations and financial results could be adversely affected.

We generally do not have long-term contracts with our customers, which makes forecasting our revenues and operating results difficult. We generally do not enter into long-term agreements with our customers obligating them to purchase our products. Our business is characterized by short-term purchase orders with shipment schedules within one year, and we generally permit orders to be cancelled or rescheduled before shipment without significant penalty. As a result, our customers may cease purchasing our products at any time, which makes forecasting our revenues difficult. In addition, due to the absence of a substantial non-cancellable backlog, we typically plan our production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. The uncertainty of product orders makes it difficult for us to forecast our sales and allocate our resources in a manner consistent with our actual sales. Moreover, our expense levels and the amounts we invest in capital equipment and new product development costs are based in part on our expectations of future sales and, if our expectations regarding future sales are inaccurate, we may be unable to reduce costs in a timely manner to adjust for sales shortfalls, and our results of operations and financial condition could be materially adversely affected.

Fluctuations in operating results make financial forecasting difficult and could adversely affect the price of our common stock. Our quarterly and annual revenues and operating results may fluctuate significantly for numerous reasons, including:

As a result of these and other factors, investors should not rely on our revenues and our operating results for any one quarter or year as an indication of our future revenues or operating results. If our quarterly revenues or results of operations fall below the expectations of investors or public market analysts, the price of our common stock could fall substantially.

Our customers who purchase display products for defense applications typically incorporate our products into their products, which are sold to the U.S. Government under contracts. U.S. Government contracts generally are not fully funded at inception and may be terminated or modified prior to completion, which could adversely affect our business. Congress funds much of the federal budget on an annual basis, and Congress often does not provide agencies with all the money requested in their budget. Many of our customers’ contracts cover multiple years and, as such, are not fully funded at the contract award. If Congress or a U.S. Government agency chooses to spend money on other programs, including as a result of changes to governmental policies and programs imposed or that may be imposed by the new presidential administration in the U.S., our customers’ contracts may be terminated for convenience. The Anti-Deficiency Act prohibits involving the government in any obligation to pay money before funds have been appropriated for that purpose, unless otherwise allowed by law. Therefore, the Anti-Deficiency Act indirectly regulates how agencies award our contracts and pay our invoices. Federal government contracts generally contain provisions that provide the federal government rights and remedies not typically found in commercial contracts, including provisions permitting the federal government to, among other things: terminate our existing contracts; modify some of the terms and conditions in our existing contracts; subject the award to protest or challenge by competitors; suspend work under existing multiple year contracts and related delivery orders; and claim rights in technologies and systems invented, developed or produced by us.

The federal government may terminate a contract with us or our customers either “for convenience” (for instance, due to a change in its perceived needs) or if we default due to our failure or the failure of a general or subcontractor to perform under the contract. If the federal government terminates a contract with one of our customers, our contract with our customers would entitle us to recover only our incurred or committed costs, settlement expenses and retain any profit on the work that was completed prior to termination. However, under certain circumstances, our recovery costs upon termination for convenience of such a contract may be limited. As is common with government contractors, we have experienced occasional performance issues under some of our contracts. We have received Stop Work Orders wherein work is suspended pending a review of the program. We may in the future receive show-cause or cure notices under contracts that, if not addressed to the federal government’s satisfaction, could give the government the right to terminate those contracts for default or to cease procuring our services under those contracts.

In addition, U.S. Government contracts and subcontracts typically involve long purchase and payment cycles, competitive bidding, qualification requirements, delays or changes in funding, extensive specification and performance requirements, price negotiations and milestone requirements. Each U.S. Government agency often also maintains its own rules and regulations with which we must comply, and which can vary significantly among agencies.

We recognize revenue for some of our defense contracts and some commercial contracts on the over-time method which requires significant management judgment, and errors in our judgment could result in our revenue being overstated or understated and the profits or loss reported could be subject to adjustment. For certain contracts with the U.S. Government, we recognize revenue over time as we perform services or manufacture the goods. The continuous transfer of control to, or performance of services for, the customer is subject to liability clauses in the contract that allow the U.S. Government to unilaterally terminate the contract for convenience, pay us for costs incurred and may allow a reasonable profit, and take control of any work in process. Contracts with commercial customers may have a similar liability clause. In situations where control transfers or services are performed over time, revenue is recognized based on the extent of progress toward completion of the performance obligation. We use the cost-to-cost approach to measure the extent of progress towards the completion of the contractual obligation for our contracts. Under the cost-to-cost measure approach, the extent of progress toward completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred. Accounting for design, development and production contracts requires judgment related to assessing risks, estimating contract revenues and costs and making assumptions for schedule and technical issues. Due to the size and nature of the work required to be performed on many of our contracts, the estimation of total revenue and cost at completion is complex and subject to many variables. Contract costs include material, labor and subcontracting costs, as well as an allocation of indirect costs. We must make assumptions regarding the number of labor hours required to complete a task, the complexity of the work to be performed, the availability, delivery date and cost of materials and the performance of our subcontractors. Due to the number of significant factors affecting revenue recognition, forecasting revenue at a point in time in the future is difficult. For contract change orders, claims or similar items, we apply judgment in estimating the amounts and assessing the potential for realization. These amounts are only included in the contract value when they can be reliably estimated, and realization is considered probable. If our estimate of total contract costs or our determination of whether the customer agrees that a milestone is achieved is incorrect, our revenue could be overstated or understated, and the profits or loss reported could be subject to adjustment. If our revenues and costs require adjustment, our stock price could decline.

If we fail to comply with complex procurement laws and regulations, we could lose business and be liable for various penalties or sanctions. We must comply with laws and regulations relating to the formation, administration and performance of federal government contracts. These laws and regulations affect how we conduct business with our federal government customers. In complying with these laws and regulations, we may incur additional costs, and non-compliance may result in fines and penalties, including contractual damages. Among the more significant laws and regulations affecting our business are:

Our contracting agency customers may review our performance under and in compliance with the terms of our federal government contracts. If a government review or investigation uncovers improper or illegal activities, we may be subject to civil or criminal penalties or administrative sanctions, including:

Additionally, the False Claims Act provides for substantial civil penalties where, for example, a contractor presents a false or fraudulent claim to the government for payment or approval. Civil actions under the False Claims Act may be brought by the government or by other people on behalf of the government (who may then share a portion of any recovery).

If we fail to comply with these laws and regulations, we may also suffer harm to our reputation, which could impair our ability to win awards of contracts in the future or receive renewals of existing contracts. If we are subject to civil or criminal penalties and administrative sanctions or suffer harm to our reputation, our current business, future prospects, financial condition or operating results could be materially harmed.

The U.S. Government may also revise its procurement practices or adopt new contracting rules and regulations, including cost accounting standards, at any time. Any new contracting methods could be costly to satisfy, be administratively difficult for us to implement and could impair our ability to obtain new contracts.

Our ability to manufacture and distribute our display products would be severely limited if the foundries that we rely on manufacture integrated circuits for our display products fail to provide those services. We depend principally on a Taiwanese foundry for the fabrication of integrated circuits for our defense display products. In addition, we use a Chinese foundry’s services for OLED deposition and processing of OLED displays. We also use foundries in Korea and France and are evaluating other European foundries. We have no long-term contracts with the foundries we use and from time to time we have been put on allocation, which means the foundry will limit or delay the number of wafers they will process for us. If foundries were to terminate or amend their arrangement with us or become unable to provide the required capacity, services and or quality on a timely basis, we may not be able to manufacture and ship our display products or we may be forced to manufacture them in limited quantities until replacement foundry services can be obtained. Furthermore, we cannot assure that we would be able to establish alternative manufacturing and packaging relationships on acceptable terms.

Our reliance on these foundries involves certain risks, including but not limited to:

Due to natural disasters such as earthquakes and typhoons that have occasionally occurred in Asia, many Taiwanese companies, including the Taiwanese foundry we use, have experienced related business interruptions. Our business could suffer significantly if any of the foundries we use have their operations disrupted for an extended period due to natural disasters, political unrest or financial instability.

We may be unable to adequately control purchase pricing of certain critical materials, which may materially adversely affect our sales or profitability. We have no long-term pricing contracts on foundry wafers and certain other materials that represent a significant portion of our product bill of material costs. We cannot provide assurance against supplier price increases that negatively impact the cost of producing products, which may adversely affect sales or profitability. Finding and/or qualifying a more cost-effective replacement supplier may take significant time.

The markets in which we operate are highly competitive and rapidly changing and we may be unable to compete successfully. There are several companies that develop or may develop products that compete in our targeted markets. The individual components that we offer for sale (displays, optical lenses, backlights and ASICs) are also offered by companies whose sole business focuses on that individual component. For example, there are companies whose sole business is to sell optical lenses. Accordingly, our strategy requires us to develop technologies and to compete in multiple markets. Some of our competitors are much larger than we are and have significantly greater financial, development and marketing resources than we do. The competition in these markets could adversely affect our operating results by reducing the volume of the products we sell or the prices we can charge. These competitors may be able to respond more rapidly than us to new or emerging technologies, including artificial intelligence technologies, or changes in customer requirements. They may also devote greater resources to the development, promotion and sale of their products than we do.

Our success will depend substantially upon our ability to enhance our products and technologies and to develop and introduce, on a timely and cost-effective basis, new products and features that meet changing customer requirements and incorporate technological enhancements. For example, we believe there is a growing demand for microLED display products and if microLEDs can be successfully commercialized they may reduce demand for our AMLCD and OLED displays. We are investing in the development of microLED display and the cost of such development we believe will be substantial. We are competing against larger companies with greater resources than us in the development of microLED displays. If we are unable to develop new products and enhance functionalities or technologies to adapt to these changes or secure any necessary regulatory approvals to roll out such new technologies on a timely basis, our business may suffer. In addition, our use of new or emerging technologies, such as artificial intelligence, may result in substantial integration and maintenance costs and may expose us to additional risks. For example, the content, analyses, or recommendations generated by artificial intelligence programs, if deficient, inaccurate, or biased, could adversely impact our business, financial condition, and operational results, as well as our reputation. Moreover, ethical concerns associated with artificial intelligence could lead to brand damage, competitive disadvantages, or legal repercussions. Any problems with our implementation or use of artificial intelligence or other technological advancements could also negatively impact our business or results of our operations.

Disruptions of our production could adversely affect our operating results. If we were to experience any significant disruption in the operation of our facilities, we would be unable to supply our products to our customers. Many of our sales contracts include financial penalties for late delivery. In the past, we have experienced power outages at our facilities, which ranged in duration from one to four days. We have certain critical pieces of equipment necessary to operate our facilities that are no longer offered for sale and we may not have service contracts or spare parts for the equipment. Additionally, as we introduce new equipment into our manufacturing processes, our display products could be subject to especially wide variations in manufacturing yields and efficiency. We may experience manufacturing problems that would result in delays in product introduction and delivery or yield fluctuations.

A disruption to our information technology systems could significantly impact our operations, revenue and profitability. Our data processing systems and our Enterprise Resource Planning (“ERP”) software are cloud-based and hosted by third parties. We also use software packages that are no longer supported by their developer. We have experienced short-term (i.e., a few days) interruptions in our Internet connection. An interruption of the third-party systems or the infrastructure that allows us to connect to the third-party systems for an extended period may affect our ability to operate our business and process transactions, which could result in a decline in sales and affect our ability to achieve or maintain profitability.

We may not achieve some or all of the anticipated benefits of our equity investments. On December 28, 2024, we had equity investments in companies totalling $3.6 million, where we have limited, if any, control over their governance, financial reporting and operations. As a result, we face certain operating, financial and other risks relating to these investments, including risks related to the financial strength of the investments. We are required to periodically review the value of these investments for impairment. For example, in the third quarter of 2024, we reviewed the financial condition and other factors of our investment in a customer and as a result, we recorded an impairment charge of $0.7 million to reduce the carrying value of our investment. These investments may not contribute to our earnings or cash flows. In addition, these investments may be required to raise additional capital, which may result in our ownership percentage being decreased.

If we are unable to obtain or maintain existing software license relationships or other relationships relating to the intellectual property we use, our ability to grow revenue and achieve profitability and positive cash flow may be negatively affected. Our headset systems include software that we license from other companies. Should we violate the terms of a license, our license could be cancelled. Companies may decide to stop supporting the software we license, or new versions of the software may not be compatible with our software, which would require us to rewrite our software, which we may not be able to do. Moreover, the license fees we pay may be increased, which would negatively affect our ability to achieve profitability and positive cash flow.

We may incur substantial costs in defending our intellectual property and may not be successful in protecting our intellectual property and proprietary rights. Our success depends in part on our ability to protect our intellectual property and proprietary rights. We rely on a combination of patents, trademarks, copyrights, trade secrets, nondisclosure agreements, IT security systems, internal controls and compliance systems, and other measures to protect our intellectual property. We also rely on nondisclosure agreements, confidentiality obligations in contracts, IT security systems, and other measures to protect certain customer and supplier information and intellectual property that we have in our possession or to which we have access. We have obtained certain domestic and foreign patents and we intend to continue to seek patents on our inventions when appropriate. We also attempt to protect our proprietary information with contractual arrangements and under trade secret laws. Our employees and consultants generally enter into agreements containing provisions with respect to confidentiality and the assignment of rights to us for inventions made by them while in our employ or consulting for us. These measures may not adequately protect our intellectual property or proprietary rights. Existing trade secret, trademark and copyright laws afford only limited protection and our patents could be invalidated, held to be unenforceable or circumvented. Moreover, the laws of certain foreign countries in which our products are or may be manufactured or sold may not provide full protection of our intellectual property rights. Misappropriation of our technology and the costs of defending our intellectual property rights from misappropriation could substantially impair our business. If we are unable to protect our intellectual property or proprietary rights, our business may not be successful, and the price of our common stock may decline.

The process of seeking patent protection can be time consuming and expensive and we cannot be certain that patents will be issued from currently pending or future patent applications. We cannot be certain that domestic or foreign intellectual property laws will allow the protection of our intellectual property rights or that others will not independently develop similar products, duplicate our products or design around any patents issued or licensed to us. We may be subject to or may initiate contested patent or patent application proceedings in the United States Patent and Trademark Office, foreign patent offices or the courts, which can demand significant financial and management resources. Patent applications in the U.S. typically are maintained in secrecy until they are published about 18 months after their earliest claim to priority. As publication of discoveries in the scientific and patent literature lags behind actual discoveries, we cannot be certain that we were the first to conceive of inventions covered by our pending patent applications or the first to file patent applications on such inventions. We also cannot be certain that our pending patent applications or those of our licensors will result in issued patents or that any issued patents will provide adequate protection against a competitor. In addition, we cannot be certain that others will not obtain patents that we would need to license or could force us to retool or cease manufacturing and sales of products covered by these patents, nor can we be sure that licenses, if needed, would be available to us on favorable terms, if at all.

We also attempt to protect our proprietary information with contractual arrangements and under trade secret laws. We believe that our future success will depend primarily upon the technical expertise, creative skills and management abilities of our officers and key employees in addition to patent ownership. Our employees enter into agreements containing provisions with respect to confidentiality and the assignment of rights to us for inventions made by them while in our employ. Agreements with consultants generally provide that rights to inventions made by them while consulting for us will be assigned to us unless the assignment of rights is prohibited by the terms of any of their prior agreements. Agreements with employees, consultants and collaborators contain provisions intended to further protect the confidentiality of our proprietary information. To date, we have had no experience in enforcing these agreements. We cannot be certain that these agreements will not be breached or that we would have adequate remedies for any breaches. Our trade secrets may not be secure from discovery or independent development by competitors, in which case we may not be able to rely on these trade secrets to prevent our competitors from using them.

Our business could suffer if we fail to recruit and retain key personnel. To continue to provide quality products in our rapidly changing business, we believe it is important to retain personnel with experience and expertise relevant to our business. Our success depends in large part upon several key management and technical employees. The loss of the services of one or more key employees, including Mr. Murray, our President and Chief Executive Officer, could seriously impede our success. We do not maintain any “key-man” insurance policies on Mr. Murray or any other employees. In addition, due to the level of technical and marketing expertise necessary to support our existing and new customers, our success will depend upon our ability to recruit and retain highly skilled management, technical, and sales and marketing personnel. Competition for highly skilled personnel is intense and there may be only a limited number of people with the requisite skills to serve in these positions. Due to the competitive nature of the labor markets in which we operate, we may be unsuccessful in attracting and retaining these personnel. Our inability to attract and retain key personnel could adversely affect our ability to develop and manufacture our products.

If we fail to keep pace with changing technologies, we may lose customers. Rapidly changing customer requirements and evolving technologies and industry standards characterize our industries. To achieve our goals, we need to enhance our existing products and develop and market new products that keep pace with continuing changes in industry standards, requirements and customer preferences. We may be unable to bring to market technologies and products that are attractive to our customers, and as a result, our business, financial condition and results of operations may be materially adversely affected.

Customer demands and new regulations related to conflict-free minerals may adversely affect us. The Dodd-Frank Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”) imposes disclosure requirements regarding the use of “conflict” minerals mined from the Democratic Republic of Congo and adjoining countries in products, whether these products are manufactured by third parties. These requirements could affect the pricing, sourcing and availability of minerals used in the manufacture of semiconductor devices (including our products). We have incurred additional costs associated with complying with the disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Our supply chain is complex, and we may be unable to verify the origins of all the metals used in our products. We purchase materials from foreign sources that may not cooperate and provide us with the necessary information to allow us to comply with the Dodd-Frank Act. This may require us to find alternative sources which could delay product shipments. We may also encounter challenges with our customers and stockholders if we are unable to certify that our products are conflict-free.

Changes in tax laws, an unfavorable resolution of tax examinations, or exposure to additional tax liabilities could have a material adverse effect on our results of operations, financial condition and liquidity. We are subject to taxes in the U.S., Korea, China and the United Kingdom. Governments in the jurisdictions in which we operate implement changes to tax laws and regulations periodically. Any implementation of tax laws that fundamentally changes the taxation of corporations in the U.S. or in the foreign jurisdictions in which we operate could materially affect our effective tax rate and could have a significant adverse impact on our financial results.

We may incur significant liabilities if we fail to comply with stringent environmental laws and regulations and the ITAR, or if we did not comply with these regulations in the past. We are subject to a variety of federal, state and local government regulations related to the use, storage, discharge and disposal of toxic or other hazardous chemicals used in our manufacturing process. We are also subject to federal International Traffic in Arms Regulations (ITAR) laws that regulate the export of technical data and export of products to other nations that may use these products for defense purposes. Failure to comply with present or future regulations could result in fines, suspension of production, or a cessation of operations. Any failure on our part to control the use of, or adequately restrict the discharge of, hazardous substances, or otherwise comply with environmental regulations, could subject us to significant future liabilities. Any failure on our part to obtain any required licenses for the export of technical data and/or export of our products or to otherwise comply with ITAR, could subject us to significant future liabilities. In addition, we cannot be certain that we have not violated applicable laws or regulations in the past, which violations could result in required remediation or other liabilities. We also cannot be certain that past use or disposal of environmentally sensitive materials in conformity with the existing environmental laws and regulations will protect us from required remediation or other liabilities under current or future environmental laws or regulations.

We may be unable to modify our products to meet regulatory or customer requirements. From time to time our display products are subject to new domestic and international requirements, such as the European Union’s Restriction on Hazardous Substances Directive. Our customers’ terms and conditions require us to follow “all laws.” If we are unable to comply with these regulations, we may not be permitted to ship our products, which would adversely affect our revenue and ability to maintain profitability. In addition, if we are found to be in violation of laws, we may be subject to fines and penalties.

We may be unable to successfully integrate new strategic acquisitions and investments, which could materially adversely affect our business, results of operations and financial condition. In the past, we have made, and in the future, we may make acquisitions of, and investments in, businesses, products and technologies that could complement or expand our business. If we identify an acquisition candidate, we may not be able to successfully integrate the acquired businesses, products or technologies into our existing business and products. Future acquisitions could result in potentially dilutive issuances of equity securities, the incurrence of debt and contingent liabilities, amortization expenses and write-downs of acquired assets.

Additionally, we have several investments where we may have limited, if any, control over their governance, financial reporting, and operations. As a result, we face certain operating, financial and other risks relating to these investments, including risks related to the financial strength of the investments. As a result, these investments may not contribute to our earnings or cash flows. In addition, these investments may be required to raise additional capital, which may result in our ownership percentage being decreased.

Changes in China’s laws, legal protections or government policies on foreign investment in China may harm our business. Our Chinese investments are subject to laws and regulations applicable to foreign investment in China as well as laws and regulations applicable to foreign-invested enterprises. These laws and regulations frequently change, including as a result of the new presidential administration in the U.S., and their interpretation and enforcement involve uncertainties that could limit the legal protections available to us. Regulations and rules on foreign investments in China impose restrictions on the means that a foreign investor like us may apply to facilitate corporate transactions we may undertake. In addition, the Chinese legal system is based in part on government policies and internal rules, some of which are not published on a timely basis or at all, that may have a retroactive effect. As a result, we may not be aware of our violation of these policies and rules until sometime after the violation. If any of our past operations are deemed to be non-compliant with Chinese law, we may be subject to penalties. For instance, under the catalogue for the Guidance of Foreign Investment Industries, some industries are categorized as sectors that are encouraged, restricted or prohibited for foreign investment. As the Catalogue for the Guidance of Foreign Investment Industries is updated every few years, there can be no assurance that China’s government will not change its policies in a manner that would render part or all of our investment to fall within the restricted or prohibited categories. If we cannot obtain approval from relevant authorities to engage in businesses that have become prohibited or restricted for foreign investors, we may be forced to sell our investment if possible. Moreover, uncertainties in the Chinese legal system may impede our ability to enforce contracts with our business partners, customers and suppliers, or otherwise pursue claims in litigation to recover damages or loss of property, which could adversely affect our business and operations.

We do not intend to pay dividends on our common stock in the foreseeable future and, consequently, your only opportunity to achieve a return on your investment during that time is if the price of our common stock appreciates. Historically, our earnings, if any, have been retained for the development of our businesses. Any recommendation by our Board of Directors to pay dividends will depend on many factors, including our financial condition, results of operations, and other factors. Accordingly, if the price of our common stock declines in the foreseeable future, you will incur a loss on your investment, without the likelihood that this loss will be offset in part or at all by potential future cash dividends.

As a publicly traded company, we are subject to a significant body of regulation, including the Sarbanes-Oxley Act of 2002. While we have developed and instituted a corporate compliance program based on what we believe are the current best practices in corporate governance and continue to update this program in response to newly implemented or changing regulatory requirements, we cannot provide assurance that we are or will be in compliance with all potentially applicable corporate regulations. If we fail to comply with any of these regulations, we could be subject to a range of regulatory actions, fines or other sanctions or litigation. If we must disclose any material weakness in our internal control over financial reporting, our stock price could decline.

None.

As a company selling products for defense applications, we may be the target of cyber-attacks from a variety of threat actors. Cybersecurity threats include attacks on, or other attempts to infiltrate, our information technology (IT) infrastructure and the IT infrastructure of our customers, suppliers, subcontractors and other third parties, attempting to gain unauthorized access to our confidential or other proprietary information, classified information, or information relating to our employees, customers, and other third parties, or to disrupt our systems or the systems of our customers, suppliers, subcontractors, and other third parties. Cybersecurity threats also include attempts to infiltrate our products or services, including attacks targeting security, confidentiality, integrity and/or availability of the hardware, software and information installed, stored or transmitted in our products, including after the purchase of those products and when they are incorporated into third-party products, facilities, or infrastructure.

We lease our 74,000 square foot production facility in Westborough, Massachusetts, 10,000 square feet of which is contiguous environmentally controlled production clean rooms operated between Class 10 and Class 1,000 levels.

Kopin Virginia, Inc., our subsidiary in Reston, Virginia, leases 6,100 square feet in Reston. KEL, our subsidiary in Scotland, leases 20,000 square feet in Dalgety Bay, 5,000 square feet of which is contiguous environmentally controlled production clean rooms operated between Class 10 and Class 10,000 levels. KEL also leases an office in Berlin, Germany.

At this time, we believe these properties are suitable for business needs for the foreseeable future.

The Company may engage in legal proceedings arising in the ordinary course of business. Claims, suits, investigations and proceedings are inherently uncertain, and it is not possible to predict the ultimate outcome of such matters and our business, financial condition, results of operations or cash flows could be affected in any particular period.

BlueRadios, Inc. v. Kopin Corporation, Civil Action No. 16-02052-JLK (D. Col.):

On August 12, 2016, BlueRadios, Inc. (“BlueRadios”) filed a complaint in the U.S. District Court for the District of Colorado, alleging that the Company breached a contract between it and BlueRadios concerning a joint venture between the Company and BlueRadios to design, develop and commercialize micro-display products with embedded wireless technology referred to as “Golden-i,” breached the covenant of good faith and fair dealing associated with that contract, breached its fiduciary duty to BlueRadios, and misappropriated trade secrets owned by BlueRadios in violation of Colorado law (C.R.S. § 7-74-104(4)) and the Defend Trade Secrets Act (18 U.S.C. § 1836(b)(1)). BlueRadios further alleged that the Company was unjustly enriched by its alleged misconduct, BlueRadios is entitled to an accounting to determine the amount of profits obtained by the Company as a result of its alleged misconduct, and the inventorship on at least ten patents or patent applications owned by the Company need to be corrected to list BlueRadios’ employees as inventors and thereby list BlueRadios as co-assignees of the patents. BlueRadios seeks monetary, declaratory, and injunctive relief, including for alleged non-payment of engineering retainer fees.

On October 11, 2016, the Company filed its Answer and Affirmative Defenses. The parties completed expert depositions on November 15, 2019. On December 2, 2019, the Company filed a Motion for Partial Summary Judgment requesting the Court dismiss counts 2-7 in their entirety and counts 1 and 8 in part. BlueRadios also filed a Motion for Partial Summary Judgment alleging it is the co-owner of U.S. Patent No. 8,909,296. Responses to the Motions for Partial Summary Judgment were filed on January 15, 2020, and replies were filed on February 19, 2020. On September 25, 2020, the Court denied BlueRadios’ Motion for Partial Summary Judgment. On August 3, 2022, the Court granted the Company’s Motion for Partial Summary Judgment by dismissing counts 3, 6, 7, the claim for punitive damages under count 2, and count 8 as it relates to patent applications and by denying the motion as it relates to counts 1, 4, and 5, and the remainder of counts 2 and 8. The Court also ordered discovery reopened for certain limited purposes. A trial date was set by the Court for January 22 to February 5, 2024 but then re-scheduled for March 20 to April 16, 2024. On Monday, April 22, 2024, after a four week trial, a jury verdict was entered finding for BlueRadios and awarding approximately $5.1 million in damages as well as recommending $19.7 million in disgorgement and exemplary damages. While no final judgment has been issued by the Court, the Court will take that recommendation under advisement and will rule in its final judgment on the final amount after post-trial briefing. On May 22, 2024, the Company filed its Motion for Judgment as a Matter of Law or in the alternative for a New Trial, as well as two submissions arguing that the disgorgement and exemplary damages should not be awarded. That same day, BlueRadios filed motions seeking a permanent injunction prohibiting Kopin from selling any products that incorporate BlueRadios’ trade secrets, over $10 million in pre-judgment interest, and over $10 million in attorneys’ fees and costs. Briefing on those issues concluded on June 26, 2024. On September 25, 2024, the Company filed a supplemental brief on issue preclusion arguing that BlueRadios’ claims were untimely because of findings of fact made in BlueRadios, Inc. v. Hamilton, Brook, Smith & Reynolds, P.C., No. 1:21-cv-10488-DJC, ECF 268 (D. Mass. Sept. 18, 2024). That supplemental briefing concluded on October 29, 2024. The Company is currently considering an appeal of any final judgment.

Not applicable.

Part II

Our common stock is traded on the Nasdaq Capital Market under the symbol “KOPN”.

As of March 7, 2025, there were approximately 292 shareholders of record of our common stock, which does not reflect those shares held beneficially or those shares held in “street” name.

We have not paid cash dividends in the past, nor do we expect to pay cash dividends for the foreseeable future. We anticipate that earnings, if any, will be retained for the development of our businesses.

Equity Compensation Plan Information

The following table sets forth information as of December 28, 2024 about shares of the Company’s common stock issuable upon the exercise of outstanding options, warrants and rights and available for issuance under our existing equity compensation plans.

(1) Amount includes shares available under the 2020 Equity Incentive Plan.

Company Stock Performance

The following graph shows a five-year comparison of cumulative total shareholder return for the Company, the Nasdaq US Benchmark TR Index and the S&P 500 Information Technology index. The graph assumes $100 was invested in each of the Company’s common stock, the Nasdaq US Benchmark TR Index and the S&P 500 Information Technology index on December 31, 2017. Data points on the graph are annual. Note that historical price performance is not necessarily indicative of future performance.

Overview

The following discussion should be read in conjunction with our consolidated financial statements and notes to those statements and other financial information appearing elsewhere in this Form 10-K. The following discussion contains forward-looking statements. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of a number of factors, including the risks discussed in “Item 1A- Risk Factors”, and elsewhere in this Form 10-K. Please refer to our cautionary note on Forward-Looking Statements on page 3 of this Form 10-K.

We are a leading developer and provider of high-performance application-specific optical solutions consisting of high-resolution microdisplays and optics, microdisplays subassemblies and headsets. We define microdisplays as displays that have a diagonal measurement of less than 2 inches. Our products are used for defense applications (soldier thermal weapon rifle sights, avionic fixed and rotary wing pilot helmets, armored vehicle targeting systems, and training & simulation headsets); industrial and medical headsets; and 3D optical inspection systems. We believe that the technologies we are developing may eventually be used in consumer augmented reality (“AR”) and virtual reality (“VR”) wearable headsets systems. Our products are primarily used to overlay digital information on the real-world scene.

Critical Accounting Estimates

Management’s discussion and analysis of our financial condition and results of operations are based upon our audited consolidated financial statements. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amount of assets, liabilities, revenues and expenses and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to revenue recognition under the cost-to-cost measurement method, and investment valuations. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for judgments about the carrying values of assets and liabilities that are not apparent from other sources. Actual results may differ from these estimates under different assumptions.

We believe the following critical accounting policies are most affected by our more significant judgments and estimates used in the preparation of our consolidated financial statements:

Revenue Recognition

Substantially all of our product revenues are derived from the sales of microdisplays, which are sold as individual displays, modules that include electronics and optics, or higher-level subassemblies for use in defense, industrial and consumer near-eye applications such as avionic helmets, thermal weapon sights or virtual reality headsets. We also have development contracts for the design, manufacture and modification of products for the U.S. Government or a prime contractor for the U.S. Government or for a customer that sells into the industrial or consumer markets. The Company’s contracts with the U.S. Government are typically subject to the Federal Acquisition Regulations (“FAR”) and are priced based on estimated or actual costs of producing goods. The FAR provides guidance on the types of costs that are allowable in establishing prices for goods provided under U.S. Government contracts. The pricing for non-U.S. Government contracts is based on the specific negotiations with each customer.

Our fixed-price contracts with the U.S. Government or other customers may result in revenue recognized in excess of amounts currently billed. We disclose the excess of revenues over amounts actually billed as Contract assets and unbilled receivables on the balance sheet. Amounts billed and due from our customers are classified as Accounts receivable on the balance sheets. In some instances, the U.S. Government retains a small portion of the contract price until completion of the contract. The portion of the payments retained until final contract settlement is not considered a significant financing component because the intent is to protect the customer. For contracts with the U.S. Government, we typically receive interim payments either as work progresses, by achieving certain milestones or based on a schedule in the contract. We recognize a liability for these advance payments in excess of revenue recognized and present it as Contract liabilities and billings in excess of revenue earned on the balance sheets. Advanced payment typically is not considered a significant financing component because it is used to meet working capital demands that can be higher in the early stages of a contract and to protect us from the other party failing to adequately complete some or all of its obligations under the contract. For industrial and consumer purchase orders, we typically receive payments within 30 to 60 days of shipment of the product, although for some purchase orders, we may require advanced payment prior to shipment of the product.

The Company recognizes revenue from a contract when it has approval and commitment from both parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectability of consideration is probable.

For certain contracts with the U.S. Government, the Company recognizes revenue over time as we deliver goods or perform services because of continuous transfer of control to the customer and the lack of an alternative use for the product. The continuous transfer of control to the customer is subject to liability clauses in the contract that allow the U.S. Government to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. For contracts with commercial customers, while the contract may have a similar liability clause, our products historically have an alternative use and thus, revenue is recognized at a point in time.

In situations where control transfers over time, revenue is recognized based on the extent of progress towards completion of the performance obligation. We use the cost-to-cost approach to measure the extent of progress towards completion of the performance obligation for our contracts because we believe it best depicts the transfer of assets to the customer. Under the cost-to-cost measure approach, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred.

Accounting for design, development and production contracts requires judgment relative to assessing risks, estimating contract revenues and costs and making assumptions for schedule and technical issues. Due to the size and nature of the work required to be performed on many of our contracts, the estimation of total revenue and cost at completion is complicated and subject to many variables. Contract costs include material, labor and subcontracting costs, as well as an allocation of indirect costs. We have to make assumptions regarding the number of labor hours required to complete a task, the complexity of the work to be performed, the availability and cost of materials and performance by our subcontractors. For contract change orders, claims or similar items, we apply judgment in estimating the amounts and assessing the potential for realization. These amounts are only included in the contract value when they can be reliably estimated and realization is considered probable. If our estimate of total contract costs or our determination of whether the customer agrees that a milestone achievement is incorrect, our revenue could be overstated or understated and the profits or loss reported could be subject to adjustment.

For our commercial customers, the Company’s revenue is recognized when obligations under the terms of a contract with our customer are satisfied and the Company transfers control of the products or performs services, which is upon delivery of the product to the customer or performance of the services. Revenue is recorded as the amount of consideration we expect to receive in exchange for transferring goods or providing services. Provisions for product returns and allowances are reductions in the transaction price and are recorded in the same period as the related revenues. We analyze historical returns, current economic trends and changes in customer demand when evaluating the adequacy of sales returns and other allowances. Certain product sales are made to distributors under agreements allowing for a limited right of return on unsold products. Sales to distributors are primarily made for sales to the distributors’ customers and not for stocking of inventory. Sales, value add and other taxes we collect concurrent with revenue-producing activities are excluded from revenue.

The Company also licenses its intellectual property (“IP”) through technology license agreements which provides the customer the right to use our IP as it exists at a point in time. These agreements may include other performance obligations including the sale of product to the customer. The satisfaction of the Company’s performance obligation, and related recognition of revenue, occurs when the IP is delivered to the customer, the license period has begun and there are no additional performance obligations in the agreement. When the license is distinct from other obligations in the agreement, the Company treats the license and other performance obligations as separate performance obligations. Accordingly, the license is recognized at a point in time or over time based on the standalone selling price. Under certain license agreements, we may receive royalties based on the sales of the licensed product. We recognize royalty revenue upon the later of when the related sales occur, or when the performance obligation to which some or all of the royalty has been allocated has been satisfied (or partially satisfied). Under our current license agreements for which a royalty exists, we have recorded revenue when the related sales by our customer occurs because the performance obligation related to the delivery of the license to the customer has been satisfied.

Investment Valuation

We periodically make equity investments in private companies, accounted for as an equity investment, whose values are difficult to determine. When assessing investments in private companies for impairment, we consider such factors as, among others, the share price from the investee’s latest financing round, the performance of the investee in relation to its own operating targets and its business plan, the investee’s revenue and cost trends, the liquidity and cash position, including its cash burn rate and market acceptance of the investee’s products and services. Because these are private companies that we do not control we may not be able to obtain all of the information we would want in order to make a complete assessment of the investment on a timely basis. Accordingly, our estimates may be revised if other information becomes available at a later date.

Results of Operations

We have two principal sources of revenues: product revenues and research and development (“R&D”) revenues. R&D revenues consist primarily of development contracts with agencies or prime contractors of the U.S. Government and commercial enterprises.

We manufacture Active-matrix Liquid Crystal (“AMLCD”) transmissive and Liquid Crystal on Silicon (“LCOS”) reflective microdisplays. Our AMLCD display production is being performed entirely in our Westborough, Massachusetts facility. KEL, our wholly owned subsidiary, manufactures our LCOS microdisplays in its facility located in Scotland. Our OLED displays are designed by us and manufactured by third parties for us.

We are a display supplier for the U.S. Army’s Family of Weapon Sights-Individual and Joint Strike Fighter F-35 programs. We are also in development for new display systems for armored vehicles and a medical headset for surgeons. Our existing and new production programs are expected to increase production for the next several years. There are other firms offering products which compete against us in the defense programs and all of the programs we supply product to are subject to the U.S. Government defense budget and procurement process. Accordingly, there can be no assurances we will continue to ship under our defense contracts.

Predicting our R&D revenue and related trends is challenging because we have limited ability to forecast whether we will be awarded additional R&D contracts in the future as such awards depend on the U.S. military budget and priorities. We cannot assure that the R&D contracts will result in workable products or, if successful, our products developed under these contracts will be procured by our customers. If we do not continue to win R&D contracts or if there is no demand for the products developed under these contracts, our ability to achieve profitability and positive cash flow could be negatively affected because the R&D revenues (or the products derived from the R&D contracts) would not be available to cover the allocated overhead and selling, general and administrative costs which may remain. Some of our contracts are fixed priced and we may incur cost overruns that would result in losses on the contracts. If we incur such losses on our contracts, our ability to achieve profitability and positive cash flow could be negatively affected.

Because our fiscal year ends on the last Saturday of December, every seven years we have a fiscal year with 53 weeks. Our fiscal years 2024 and 2023 were 52-week years and fiscal year 2022 was a 53-week year.

Revenues. Our revenues by display application, which include product sales and amounts earned from research and development contracts, for fiscal years 2024, 2023 and 2022 by category, were as follows:

Fiscal Year 2024 Compared to Fiscal Year 2023

Sales of our products for Defense applications include systems used by the military both in the field and for training and simulation. Sales of our products for Defense applications may be for a one-time purchase or for programs that run for several years. Revenues from product sales to defense customers increased in 2024 compared to 2023, primarily due to an increase in shipments of our products for thermal weapon sight applications that was partially offset by a decrease in sales of our products for defense pilot helmets.

Industrial applications revenues represent customers who purchase our display products for use in headsets used for manufacturing, distribution, public safety, 3D metrology equipment and other industrial applications. Our 3D metrology customers are primarily located in Asia and they sell to Asian contract manufacturers who use the 3D metrology machines for quality control purposes. The decrease in Industrial/Enterprise applications revenues in 2024 compared to 2023 was primarily due to a decrease in sales to customers who use our display components in 3D metrology equipment and industrial headsets. Over the last few years, we believe our customers have been using lower priced and lower quality display products in their 3D AOI machines to compensate for lower demand, which has resulted in more price competition. We are introducing lower priced products in 2025 to increase sales, but if unit demand remains flat or decreases, our revenues from this market will decline.

Sales of our displays for Consumer applications are primarily for use in thermal imaging products, recreational rifle and hand-held scopes. The decrease in Consumer applications in 2024 compared to 2023 was primarily due to a decrease in sales of our displays for consumer applications which was partially the result of our focusing the Company’s sales and marketing efforts on defense applications in 2023.

R&D revenues decreased in 2024 as compared to 2023 primarily due to decreased funding for display technology, armored vehicle targeting systems and other weapon system development for U.S. defense programs, and medical headset development. These contracts typically reimburse us for direct costs and allocated overhead and selling, general and administrative costs and in some cases profit. In 2024 and 2023, our R&D revenues exceeded funded R&D expenses by approximately $2.2 million and $6.3 million, respectively.

The decrease in license and royalty revenue in 2024 compared to 2023 is due to a decrease in royalties earned under IP license agreements for industrial wearable headsets.

International product sales represented approximately 6% and 13% of product revenues for 2024 and 2023, respectively. We categorize our revenues as either domestic or international based upon the delivery destination of our product. For example, if the customer is located in Asia or if a U.S. customer has its Asian contract manufacturer order product from us and we deliver the product to Asia, we categorize both these sales as international. In addition, if we earn royalties on sales from a customer, the royalties are categorized as domestic or international based on how the product revenues are categorized. Our international sales decreased in 2024 as compared to 2023 due to a decrease in sales of our products for 3D metrology application by our subsidiary, Kopin Europe Ltd., our OLED displays for consumer applications and industrial headset products manufactured overseas. Our international sales are primarily denominated in U.S. dollars. Consequently, a strengthening of the U.S. dollar could increase the price in local currencies of our products in foreign markets and make our products relatively more expensive than competitors’ products that are denominated in local currencies, which could result in a reduction in sales or profitability in those foreign markets. As a result, our financial position and results of operations are subject to exchange rate fluctuation in transactional and functional currency. We have not taken any protective measures against exchange rate fluctuations, such as purchasing hedging instruments with respect to such fluctuations, because of the historically stable exchange rate between the Japanese yen, Great Britain pound and the U.S. dollar. Foreign currency translation impact on our results, if material, is described in further detail under “Item 7A. Quantitative and Qualitative Disclosures About Market Risk” section below.

Fiscal Year 2023 Compared to Fiscal Year 2022

Revenues from product sales to defense customers decreased in 2023 compared to 2022, primarily due to a decrease in shipments of our products for thermal weapon sight applications that was partially offset by an increase in sales of our products for defense pilot helmets and training and simulation programs.

Revenues from product sales for industrial/enterprise applications decreased in 2023 compared to 2022 primarily due to a decrease in sales to customers who use our display components in 3D metrology equipment and industrial headsets.

Revenues from product sales for consumer applications decreased in 2023 compared to 2022 primarily due to a decrease in sales of our OLED displays for consumer applications.

R&D revenues decreased in 2023 as compared to 2022 primarily due to decreased funding for new display technology development for U.S. defense programs and OLED display development, which was partially offset by increased funding for armor vehicle targeting system and medical headset development. These contracts typically reimburse us for direct costs and allocated overhead and selling, general and administrative costs and in some cases profit. In 2023 and 2022, our R&D revenues exceeded funded R&D expenses by approximately $6.3 million and $4.1 million, respectively.

The increase in license and royalty revenue in 2023 compared to 2022 is due to an increase in royalties earned under IP license agreements for industrial wearable headsets.

International product sales represented approximately 13% and 22% of product revenues for 2023 and 2022, respectively. Our international sales decreased in 2023 as compared to 2022 due to a decrease in sales of our products for 3D metrology application by our subsidiary, KEL, our OLED displays for consumer applications and industrial headset products manufactured overseas.

Cost of Product Revenues. Cost of product revenues, which is comprised of materials, labor and manufacturing overhead related to the production of our products for fiscal years 2024, 2023 and 2022 were as follows:

Fiscal Year 2024 Compared to Fiscal Year 2023

Cost of product revenues decreased as a percentage of revenues in 2024 as compared to 2023 primarily due to increased unit volume of thermal weapon sights from higher sales in 2024 as compared to 2023 which resulted in a lower fixed overhead cost per unit. The margin improvement from thermal weapon sights was partially offset by lower margin contribution from industrial and training and simulation revenues due to their decline in sales. The Company also implemented several programs and hired additional employees to improve manufacturing quality and efficiencies.

The United States government is or is in the process of increasing or implementing tariffs on the importation of certain goods. In some cases, our contracts allow us to pass along new or increased tariffs subject to ability to prove the impact of the tariff on the cost of our product. If we are unable to increase our prices due to the implementation or increase in tariff, duties and other taxes our gross margin and overall profitability would be negatively impacted.

The issues associated with the global shortage of semiconductor circuit chips and other raw materials decreased in 2024 as compared to 2023 and 2022. However, we have identified several semiconductor components which continue to have long lead delivery times. We continue to search for and procure all necessary components from our current vendors and new alternative vendors. In certain situations, we can obtain the components but at a significantly increased cost. The inability to procure a single component will prevent the completion of our product and the ability to sell the product. Our products go through extensive qualification processes and therefore our customers may not accept a replacement component. We are unable to determine if we will be able to obtain all necessary components for fiscal 2025. If we are unable to obtain all necessary components, we may be required to stop production, which would negatively affect our cash flow and results of operations.

Fiscal Year 2023 Compared to Fiscal Year 2022

Cost of product revenues decreased as a percentage of revenues in 2023 as compared to 2022 primarily due to increased sales of higher margin products for defense applications in 2023 versus 2022 and lower sales of lower margin products from defense applications in 2023 versus 2022. The Company also implemented several programs and hired additional employees to improve manufacturing quality and efficiency.

Research and Development. Research and development (“R&D”) expenses are incurred in support of internal display development programs or programs funded by agencies or prime contractors of the U.S. Government and commercial partners. R&D costs include staffing, purchases of materials and laboratory supplies, circuit design costs, fabrication and packaging of display products and allocated overhead. In fiscal year 2024, our Funded R&D expenditures were primarily related to our display products and defense systems and our Internal R&D was primarily related to the development of OLED displays. R&D expenses for fiscal years 2024, 2023 and 2022 were as follows:

Fiscal Year 2024 Compared to Fiscal Year 2023

Funded R&D expense for 2024 decreased as compared to 2023 primarily due to the completion of contracts for defense programs awarded prior to 2024. Internal R&D expense for 2024 increased as compared to the prior year primarily due to increases in display development costs and costs incurred to establish European foundry services.

Fiscal Year 2023 Compared to Fiscal Year 2022

Funded R&D expense for 2023 decreased as compared to 2022 primarily due to the completion of contracts for defense programs awarded prior to 2023. Internal R&D expense for 2023 decreased as compared to the prior year primarily due to decreased OLED development.

Selling, General and Administrative. Selling, general and administrative (“SG&A”) expenses consist of the expenses incurred by our sales and marketing personnel and related expenses, and administrative and general corporate expenses. SG&A expenses for the fiscal years 2024, 2023 and 2022 were as follows:

Fiscal Year 2024 Compared to Fiscal Year 2023

SG&A for 2024 increased as compared to 2023 primarily due to an increase of approximately $1.4 million in legal and professional fees and $0.2 million in excise taxes, partially offset by $0.4 million lower bad debt expense and $0.2 million decrease in non-cash stock-based compensation.

Fiscal Year 2023 Compared to Fiscal Year 2022

SG&A for 2023 increased as compared to 2022 primarily due to an increase of approximately $5.0 million in legal and professional fees and $1.0 million in non-cash stock-based compensation, partially offset by a $1.3 million decrease in compensation and benefits.

Litigation Damages Fiscal year 2024. Litigation damages were accrued as a result of the April 22, 2024 jury verdict that was entered against the Company awarding approximately $5.1 million in damages as well as recommending $19.7 million in disgorgement and exemplary damages.

Total Non-operating (Expense) Income. Non-operating (expense) income is primarily composed of interest income, revaluation and impairment of equity investments, foreign currency transactions, remeasurement gains and losses incurred by our UK-based subsidiaries and other non-operating income items. Non-operating (expense) income for the fiscal years 2024, 2023 and 2022 were as follows:

Fiscal Year 2024 Compared to Fiscal Year 2023

In 2024, we recorded $1.6 million of impairment losses on equity investments. In 2023, we recorded $3.3 million of impairment losses on equity investments. In 2024, we recorded $0.2 million of foreign currency gains compared to $0.2 million of foreign currency losses recorded in 2023.

Fiscal Year 2023 Compared to Fiscal Year 2022

In 2023, we recorded $3.3 million of impairment losses on equity investments. In 2022, we recorded a gain of $4.7 million resulting from the revaluation of an equity investment. Also in 2022, we recorded a $2.0 million impairment charge on an equity investment. In 2023, we recorded $0.2 million of foreign currency losses compared to $0.3 million of foreign currency losses recorded in 2022.

Tax provision

Fiscal Year 2024 Compared to Fiscal Year 2023

The provision for income taxes for the fiscal years ended 2024 and 2023 of approximately $(0.2) million was due to the accretion of additional potential liabilities related to uncertain tax positions and deferred tax liabilities for the Company’s former Korean subsidiary.

Fiscal Year 2023 Compared to Fiscal Year 2022

The provision for income taxes for the fiscal years ended 2023 and 2022 of approximately $(0.2) million and $(0.1) million, respectively, was due to the accretion of additional potential liabilities related to uncertain tax positions and deferred tax liabilities for the Company’s former Korean subsidiary.

Net loss attributable to noncontrolling interest. In the first quarter of 2023, we acquired the remaining interest in eMDT. Net loss attributable to noncontrolling interest on our consolidated statement of operations represents the portion of the results of operations of our majority owned subsidiaries which is allocated to the shareholders of the equity interests not owned by us. The change in net loss attributable to noncontrolling interest in 2024 compared to 2023 was $0 and in 2023 compared to 2022 was less than $0.1 million and was the result of operations of eMDT.

Liquidity and Capital Resources

At December 28, 2024 and December 30, 2023, we had cash and cash equivalents, including restricted cash, and marketable securities of $36.6 million and working capital of $18.9 million compared to $17.9 million and $24.0 million, respectively.

The change in cash and cash equivalents and marketable securities was primarily due to the sale of common stock and prefunded warrants of $1.5 million in the fourth quarter of 2024, $25.2 million in the third quarter of 2024 and $7.2 million in the first quarter of 2024 which was partially offset by cash used in operations of $14.2 million. Our cash and cash equivalents and liquidity could be adversely affected by any amounts that become payable in connection with any adverse results from any litigation we are, or may become, involved in.

Equity offerings

On September 30, 2024, we sold 2,405,000 shares of common stock and received gross proceeds of $1.5 million.

On September 23, 2024, we sold 37,550,000 shares of common stock and pre-funded warrants to purchase up to 4,000,000 shares of common stock at a public offering price of $0.64 per pre-funded warrants, for gross proceeds of $27.0 million before deducting underwriting discounts and offering expenses paid by the us of $1.8 million. The offering price of the pre-funded warrant equals the public offering price per share of the common stock less the $0.01 per share exercise price of each pre-funded warrant.

On January 27, 2023, we sold 17 million shares of registered common stock to certain investors and issued pre-funded warrants to purchase up to 6,000,000 shares of common stock at a public offering price of $0.99 per pre-funded warrant, which equals the public offering price per share of the common stock less the $0.01 per share exercise price of each pre-funded warrant. The gross proceeds of these transactions were $22.9 million, before deducting underwriting discounts and offering expenses paid by us of $1.5 million.

At-the-market offerings

During the three months ended March 30, 2024, we sold 3,080,000 shares of common stock for gross proceeds of $7,466,755 (average of $2.42 per share) before deducting broker expenses paid by us of approximately $0.2 million, pursuant to our then effective At-The-Market Equity Offering Sales Agreement, dated as of March 5, 2021 (the “ATM Agreement”) with Stifel, Nicolaus & Company, Incorporated (“Stifel”), as agent. The ATM Agreement terminated in the three months ended March 30, 2024. On January 24, 2025 we entered into a new At-The-Market Equity Offering Sales Agreement with Stifel, Nicolaus & Company, Incorporated (“Stifel”), as agent, for the sale of up to $50 million of securities. Subsequent to year end, the Company cannot use the ATM Agreement entered into on January 24, 2025 until such time the Company can utilize Form S-3.

In the second quarter of 2022, we sold 1.5 million shares of common stock and 0.2 million shares of treasury stock for gross proceeds of $2.1 million (average of $1.26 per share) before deducting broker expenses paid by us of less than $0.1 million and in the third quarter of 2022, the Company sold 675,000 shares of common stock for gross proceeds of approximately $0.9 million (average of $1.27 per share) before deducting broker expenses paid by us of less than $0.1 million, pursuant to an ATM Agreement. The net proceeds from the sale of common shares were used for general corporate purposes, including working capital.

The following table presents the components of our cash, cash equivalents, restricted cash and marketable securities held in U.S. dollars as of the dates presented:

We have no plans to repatriate the cash and cash equivalents held in our foreign subsidiary KEL.

The manufacturing operations at our Korean facility, Kowon, have ceased and Kowon was liquidated at fiscal year ended 2018. We have recorded deferred tax liabilities for any additional withholding tax that may be due to the Korean government upon Kowon’s final tax return acceptance.

We have incurred net losses of $43.9 million, $19.7 million and $19.3 million for the fiscal years 2024, 2023 and 2022, respectively, and net cash outflows from operations of $14.2 million, $15.3 million and $17.7 million for the fiscal years ended 2024, 2023 and 2022, respectively. Our net cash outflows from operations were partially a result of funding our ongoing investments in research and development which we believe will continue. We have in the past sold equity securities through an at-the-market offering and in the traditional fashion of significant equity offerings. As the Company is unable to conclude that a favorable outcome in this litigation is probable and due to the net losses and negative cash flows from operations, management has concluded that there is substantial doubt about the Company’s ability to continue as a going concern for twelve months from the issuance of these financial statements. Excluding a possible adverse result of the litigation discussed in Note 12 of the consolidated financial statements, we estimate we will have sufficient liquidity to fund operations at least through the second quarter of 2026. Nonetheless, we monitor the capital markets on an ongoing basis and may consider raising capital if favorable market conditions develop. If our actual results are less than projected or we need to raise capital for additional liquidity, we may be required to do additional equity financings, reduce expenses or enter into a strategic transaction. However, we can make no assurance that we will be able to raise additional capital, reduce expenses sufficiently, or enter into a strategic transaction on terms acceptable to us, or at all.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

Seasonality

Our revenues have not followed a seasonal pattern for the past three years and we do not anticipate any seasonal trend to our revenues in 2025.

Contractual Obligations

Under our former CEO’s (“Dr. Fan”) employment agreement, commencing in January 2023, Dr. Fan (or in the event of his death prior to completion of all installments to his surviving spouse, or if none to his estate) would receive $1,500,000 in twenty-four (24) equal monthly installments. As of December 28, 2024, the monthly installments have been paid. In addition, under Dr. Fan’s employment agreement he receives $40,000 per year through 2033.

The following is a summary of our contractual lease payment obligations as of December 28, 2024:

We invest our excess cash in high-quality U.S. Government, government-backed (i.e., Fannie Mae, FDIC guaranteed bonds and certificates of deposit) and corporate debt instruments, which bear lower levels of relative risk. We believe that the effect, if any, of reasonably possible near-term changes in interest rates on our financial position, results of operations and cash flows, should not be material to our cash flows or income. It is possible that interest rate movements would increase our unrealized gain or loss on debt securities. We are exposed to changes in foreign currency exchange rates primarily through our translation of our foreign subsidiaries’ financial position, results of operations, and transaction gains and losses as a result of non-U.S. dollar-denominated cash flows related to business activities in Asia and Europe, and remeasurement of U.S. dollars to the functional currency of our U.K. subsidiary. We are also exposed to the effects of exchange rates in the purchase of certain raw materials which are in U.S. dollars but the price on future purchases is subject to change based on the relationship of the Japanese yen to the U.S. dollar. We do not currently hedge our foreign currency exchange rate risk. We estimate that any market risk associated with our international operations or investments is unlikely to have a material adverse effect on our business, financial condition or results of operation. Our portfolio of marketable securities is subject to interest rate risk although our intent is to hold securities until maturity. The credit rating of our investments may be affected by the underlying financial health of the guarantors of our investments. We use silicon wafers in our production processes but do not enter into forward or futures hedging contracts.

The financial statements required by this Item are included in this Report on pages 41 through 69. Reference is made to Item 15 of this Report.

As previously reported on the Company’s Current Report on Form 8-K, filed with the SEC on December 6, 2024, on December 2, 2024, the audit committee approved the engagement of BDO USA, P.C. (“BDO”) as our independent registered public accounting firm, effective upon the execution of a satisfactory engagement letter with BDO and dismissed our prior independent registered public accounting firm, RSM US LLP (“RSM”), effective immediately prior to the engagement of BDO.

During the fiscal years ended December 30, 2023 and December 31, 2022, and the subsequent interim period through the date of our engagement of BDO on December 2, 2024, neither the Company, nor anyone acting on our behalf, consulted with BDO regarding any of the matters described in Items 304(a)(2)(i) and (ii) of Regulation S-K.

RSM’s audit reports on our consolidated financial statements for the fiscal years ended December 30, 2023 and December 31, 2022 did not contain any adverse opinion or disclaimer of opinion and were not qualified or modified as to uncertainty, audit scope, or accounting principles.

During the two most recent fiscal years ended December 30, 2023 and December 31, 2022, and the subsequent interim period through their dismissal on December 2, 2024: (i) there were no disagreements within the meaning of Item 304(a)(1)(iv) of Regulation S-K between us and RSM on any matter of accounting principles or practices, financial statement disclosure, or auditing scope or procedure, which disagreements, if not resolved to RSM’s satisfaction, would have caused RSM to make reference to the subject matter of the disagreements in connection with its reports on our consolidated financial statements for such years, and (ii) no reportable events within the meaning of Item 304(a)(1)(v) of Regulation S-K.

We provided RSM with a copy of the disclosures set forth above. RSM’s confirmatory letter was included as Exhibit 16.1 to our Current Report on Form 8-K filed with the SEC on December 6, 2024.

Disclosure Controls and Procedures

In connection with filing the Form 10-K, management, under the supervision of and with the participation of our Chief Executive Officer and our Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures, as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as of the end of the period covered by our Annual Report on Form 10-K for the fiscal year ended December 28, 2024. Based upon that evaluation, our CEO and CFO concluded that, as of the end of the period covered by this report, our disclosure controls and procedures were not effective due to the material weaknesses identified by management and described below.

Management’s Annual Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. A company’s internal control over financial reporting is a process designed by, or under the supervision of, the Company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the Company’s Board of Directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and include those policies and procedures that:

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Under the supervision of and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of our internal control over financial reporting as of December 28, 2024, based on the framework set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework (2013 framework). Based on that evaluation, our management concluded that, as of December 28, 2024, internal control over financial reporting was not effective based on criteria established in the Internal Control-Integrated Framework issued by the COSO for reasons discussed below.

We identified control deficiencies, that when aggregated, constitute material weaknesses as follows:

Remediation Activities

Management is actively engaged in the implementation of a remediation plan to implement measures designed to improve our internal control over financial reporting to remediate these material weaknesses with oversight from the Audit Committee of the Board of Directors.

Changes in Internal Control Over Financial Reporting

Except as described above related to the identification of the material weaknesses, there were no changes in our internal control over financial reporting during the fourth quarter of the fiscal year ended December 28, 2024, that have materially affected or are reasonably likely to materially affect our internal control over financial reporting. 

During the three months ended December 28, 2024, no director or officer of the Company adopted or terminated a “Rule 10b5-1 trading arrangement” or “non-Rule 10b5-1 trading arrangement,” as each term is defined in Item 408(a) of Regulation S-K.

Not applicable.

The information required under this item is incorporated herein by reference to our Proxy Statement relating to our 2025 Annual Meeting of Stockholders (the “Proxy Statement”). We expect to file the Proxy Statement with the SEC in April 2025 (and, in any event, no later than 120 days after the close of our last fiscal year).

Code of Ethics. We have adopted a Code of Business Conduct and Ethics (“the Code”) that applies to all our employees (including our CEO and CFO) and directors. The Code is available on our website at www.kopin.com. We intend to satisfy the disclosure requirement regarding any amendment to or waiver of a provision of the Code applicable to any executive officer or director, by posting such information on our website.

Insider Trading Policy. We have adopted an insider trading compliance policy regarding securities transactions (the “Insider Trading Compliance Policy”) that applies to our directors, officers, employees, consultants, and contractors and those of our subsidiaries. We believe that the Insider Trading Compliance Policy is reasonably designed to promote compliance with insider trading laws, rules and regulations with respect to the purchase, sale and/or other dispositions of our securities, as well as any listing standards applicable to us. A copy of the Insider Trading Compliance Policy is filed as Exhibit 19 to this Annual Report on Form 10-K.

Our corporate governance guidelines, whistleblower policy and the charters of the audit committee, compensation committee, and nominating and corporate governance committee of the Board of Directors as well as other corporate governance document materials are available on our website at www.kopin.com under the heading “Investors,” then “Governance” then “Governance Documents.”

The information required by this item is incorporated herein by reference from the Proxy Statement.

The information required by this item is incorporated herein by reference from the Proxy Statement. Refer also to the equity compensation plan information set forth in Part II Item 5 of this Annual Report on Form 10-K.

The information required by this item is incorporated herein by reference from the Proxy Statement.

The information required by this item is incorporated herein by reference from the Proxy Statement.

Part IV

(1) Consolidated Financial Statements:

(2) Financial Statement Schedules:

Financial Statement Schedules have been omitted because the information required to be set forth therein is not applicable or is shown in the accompanying Consolidated Financial Statements or notes thereto.

(3) Exhibits:

The exhibits filed as part of this Form 10-K are listed on the exhibit index immediately preceding such exhibits and is incorporated herein by reference.

Report of Independent Registered Public Accounting Firm

Shareholders and Board of Directors

Kopin Corporation

Westborough, Massachusetts

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheet of Kopin Corporation (the “Company”) as of December 28, 2024, the related consolidated statement of operations, comprehensive loss, stockholders’ equity, and cash flows for the year then ended, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 28, 2024, and the results of its operations and its cash flows for the year then ended, in conformity with accounting principles generally accepted in the United States of America.

Going Concern Uncertainty

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the consolidated financial statements, the Company has an outstanding litigation matter and has suffered recurring losses and negative cash flows from operations that raise substantial doubt about its ability to continue as a going concern. Management’s plans in regard to these matters are also described in Note 1. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audit included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audit provides a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are matters arising from the current period audit of the consolidated financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of these critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating these critical audit matters below, providing separate opinions on these critical audit matters or on the accounts or disclosures to which they relate.

Net product revenue recognized using the cost-to-cost input method

As described in Note 1 to the consolidated financial statements, for certain contracts with prime contractors to the U.S. Government, the Company recognizes revenue over time using the cost-to-cost input method as the Company completes the performance obligations because of the continuous transfer of control to the customer and the lack of an alternative use for the product. Under this method, the Company measures progress towards completion based on the ratio of costs incurred to date to total estimated costs to satisfy the Company’s performance obligation. The cost-to-cost input method requires management to use significant assumptions and judgements to determine the estimated yield to be incurred throughout the customer contract.

We identified a certain assumption used in the estimated yield to determine net product revenue recognized using the cost to-cost input method as a critical audit matter. The principal consideration for our determination is the assumption requires management to use significant judgement in determining the estimated yield throughout the customer contract. Auditing the assumption required significant audit effort and auditor judgment to evaluate the audit evidence obtained.

The primary procedures we performed to address the critical audit matter included:

Research and development revenues recognized using the cost-to-cost input method

As described in Note 1 to the consolidated financial statements, the Company has research and development revenues, whereby control transfers overtime and revenue is recognized based on the extent of progress towards completion of the performance obligation. The Company recognizes revenue for certain of its research and development contracts over time, measuring progress using the cost-to-cost input method as costs are incurred. Under this method, the Company measures progress towards completion based on the ratio of costs incurred to date to total estimated costs to satisfy the Company’s performance obligation. The cost-to-cost input method requires management to use significant assumptions and judgements to estimate costs associated with its contracts with customers. These costs are estimated at contract inception and are monitored and updated throughout the duration of the contract.

We identified the estimated costs used in the cost-to-cost input method to determine the revenue recognized for certain research and development revenue contracts as a critical audit matter. The principal consideration for our determination is that research and development revenue recognized using the cost-to-cost input method requires management to use significant assumptions and judgements in determining the estimated future costs in the cost-to-cost calculation expected to be incurred throughout the customer contract. Auditing these estimates and assumptions required significant audit effort and a high degree of auditor judgment and subjectivity to evaluate the audit evidence obtained.

The primary procedures we performed to address the critical audit matter included:

/s/ BDO USA, P.C.

We have served as the Company’s auditor since 2024.

Boston, Massachusetts

April 16, 2025

Report of Independent Registered Public Accounting Firm

Stockholders and the Board of Directors of Kopin Corporation

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheet of Kopin Corporation and its subsidiaries (the Company) as of December 30, 2023, the related consolidated statements of operations, comprehensive loss, stockholders’ equity and cash flows, for each of the two years in the period ended December 30, 2023, and the related notes (collectively, the financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 30, 2023, and the results of its operations and its cash flows for each of the two years in the period ended December 30, 2023 in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ RSM US LLP

We served as the Company’s auditor from 2019 to 2024.

Boston, Massachusetts

March 14, 2024

KOPIN CORPORATION 

CONSOLIDATED BALANCE SHEETS