UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2024

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _______ to _______

Commission file number 001-40730

DRAGONFLY ENERGY HOLDINGS CORP.

(Exact name of registrant as specified in its charter)

(775) 622-3448

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports); and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to Section 240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of voting stock held by non-affiliates of the Registrant on June 30, 2024, based on the closing price of $7.61 for shares of the registrant’s common stock as reported by the Nasdaq Capital Market, was approximately $37.5 million.

As of March 27, 2025, there were 7,589,642 shares of the registrant’s common stock, par value $0.0001 per share, issued and outstanding.

Documents incorporated by reference:

None.

TABLE OF CONTENTS

On November 22, 2024, we effected a 1-for-9 reverse stock split of our outstanding shares of common stock. Unless specifically provided otherwise herein, all share and per share information in this Annual Report on Form 10-K has been adjusted to reflect the reverse stock split.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 under Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended. Forward-looking statements include statements with respect to our beliefs, plans, objectives, goals, expectations, anticipations, assumptions, estimates, intentions and future performance, and involve known and unknown risks, uncertainties and other factors, which may be beyond our control, and which may cause our actual results, performance or achievements to be materially different from future results, performance or achievements expressed or implied by such forward-looking statements. All statements other than statements of historical fact are statements that could be forward-looking statements. You can identify these forward-looking statements through our use of words such as “may,” “can,” “anticipate,” “assume,” “should,” “indicate,” “would,” “believe,” “contemplate,” “expect,” “seek,” “estimate,” “continue,” “plan,” “point to,” “project,” “predict,” “could,” “intend,” “target,” “potential” and other similar words and expressions of the future.

There are a number of important factors that could cause the actual results to differ materially from those expressed in any forward-looking statement made by us. These factors include, but are not limited to:

The foregoing does not represent an exhaustive list of matters that may be covered by the forward-looking statements contained herein or risk factors that we are faced with that may cause our actual results to differ from those anticipated in such forward-looking statements. Please see “Part I—Item 1A—Risk Factors” for additional risks which could adversely impact our business and financial performance.

All forward-looking statements are expressly qualified in their entirety by this cautionary notice. You are cautioned not to place undue reliance on any forward looking statements, which speak only as of the date of this report or the date of the document incorporated by reference into this report. We have no obligation, and expressly disclaims any obligation, to update, revise or correct any of the forward-looking statements, whether as a result of new information, future events or otherwise. We have expressed our expectations, beliefs and projections in good faith and believe they have a reasonable basis. However, we cannot assure you that our expectations, beliefs or projections will result or be achieved or accomplished.

Part I

Item 1. Business

All references in this report to “Dragonfly,” the “Company,” “we,” “us,” or “our” mean Dragonfly Energy Holdings Corp. and its subsidiaries unless stated otherwise or the context otherwise indicates.

Overview

We are a manufacturer of non-toxic deep cycle lithium-ion batteries that caters to customers in the consumer industry (including the recreational vehicle (“RV”), marine vessel, solar and off-grid residence industries), and trucking, industrial and energy storage markets, with proprietary, patented and disruptive battery cell manufacturing and non-flammable solid-state cell technology currently under development. Our goal is to develop technology to deliver environmentally impactful solutions for energy storage to everyone globally. We believe that the innovative design of our lithium-ion batteries is ideally suited for the demands of modern customers who rely on consumer electronics, connected devices and smart appliances that require continuous, reliable electricity, regardless of location.

Our deep cycle lithium iron phosphate (“LFP”) batteries provide numerous advantages compared to incumbent products, such as lead-acid batteries. LFP batteries are non-toxic and environmentally friendly, do not rely on scarce or controversial metals and are a highly cost-effective storage solution. LFP batteries use lithium iron phosphate (“LiFePO4”) as the cathode material for lithium-ion cells rather than nickel or cobalt. Although the energy density of LFP batteries is lower, they have a longer cycle life and experience a slower rate of capacity loss. LFP is also intrinsically safer than sulfide gases due to its thermal and chemical stability, meaning our LFP batteries are less flammable than alternative products. As we develop our proprietary solid-state cell technology, we believe our use of LFP will continue to provide significant advantages over the lithium-ion technology in development by most other companies that still incorporate less stable components in their chemistries (such as sulfide gases, which are chemically unstable and form hydrogen sulfide when exposed to air).

We have a dual-brand strategy for battery products, Dragonfly Energy (“Dragonfly Energy”) and Battle Born Batteries (“Battle Born”). Battle Born branded products are primarily sold direct-to-consumers (“DTC”), while the Dragonfly Energy brand is primarily sold to original equipment manufacturers (“OEMs”). However, with the growing popularity and brand recognition of Battle Born, these batteries have become increasingly popular with our OEM customers. Based on the extensive research and optimization undertaken by our team, we have developed a line of products with features including a proprietary battery management system and an internal battery heating feature for cold temperatures, and we have recently launched our unique battery communication system. We currently source the LFP cells incorporated into our batteries from a limited number of carefully selected suppliers that can meet our demanding quality standards and with whom we have developed long-term relationships.

Reflecting the strength of our DTC brand, we signed a brand licensing contract in July of 2024 with Stryten Energy for the Battle Born brand to be deployed in B2B sales within Stryten’s target market. The contract is expected to bring $30 million of licensing revenues within a seven year period. Additionally, we signed a contract manufacturing agreement that allows for us to assemble battery packs to be sold by Stryten under the Battle Born label. Both licensing and contract manufacturing revenues from these contracts are expected to come in throughout 2025, and we believe will represent a significant portion of our total revenues beginning in 2026.

Founded as an aftermarket-focused company, we initially targeted direct-to-consumer (DTC) sales within the recreational vehicle (RV) market. Since our inception in 2020, we have successfully sold over 330,000 batteries. For the fiscal years ended December 31, 2024, and December 31, 2023, we sold 42,447 and 64,906 batteries, respectively, generating revenues of $50.6 million and $64.5 million for each year.

Our innovative battery products have disrupted the traditional lead-acid battery markets. The strong DTC demand, combined with our efforts to educate and market to original equipment manufacturers (OEMs), has facilitated significant penetration into the OEM sector. Historically, we have driven total sales growth through several strategies:

Our valued RV OEM partners currently include industry leaders such as Airstream, Tiffin Motorhomes, Forest River, nuCamp RV, Triple E RV, REV Group, Keystone, and THOR Industries (“THOR”). Notably, THOR has made a strategic investment in our business, which we believe underscores our strong industry relationships.

For the year ended December 31, 2024, we experienced a period of sustained market correction characterized by ongoing inflation and historically high interest rates, which posed challenges to our DTC markets. While there were small increases in retail registrations and wholesale shipments within the RV industry, much of this growth was concentrated in the price-sensitive entry-level segment. These entry-level RVs typically do not incorporate our battery products, resulting in a decline in our overall sales due to the limited growth in segments aligned with our offerings.

However, we did observe increased OEM adoption of our products outside the entry-level segment, marked by the acquisition of new customers and enhanced market share within existing customer product lines. As a result, a higher proportion of our revenue was generated through the OEM channel compared to the DTC market.

We successfully entered into two significant distribution agreements with Keystone Automotive Group (a division of LKQ) and Meyer Distribution. These partnerships are expected to expand our reach within the RV and marine dealer networks and support continued growth in our DTC channels.

In 2024, RV dealers continued to optimize their inventory levels, resulting in relatively flat sales after a substantial 36% correction in 2023. The industry’s pivot towards entry-level RVs, which do not typically utilize our batteries, contributed to the decline in total revenue for the year ended December 31, 2024, compared to the prior year.

Based on our ongoing discussions with customers and current unit forecast projections, we anticipate an increase in revenue within the RV market for 2025. We remain committed to expanding our market presence, leveraging strategic partnerships, and driving innovation to sustain our growth trajectory.

We currently offer several lines of batteries across our two brands, each differentiated by size, power and capacity, consisting of seven different models, which come with an option for internal heat for cold temperature operation or an option for wireless communication using our Dragonfly IntelLigence feature. To supplement our battery offerings, we are also a reseller of accessories for battery systems. These include chargers, inverters, monitors, controllers and other system accessories from brands such as Victron Energy, Progressive Dynamics, Magnum Energy and Sterling Power.

Our battery packs are designed and assembled in-house in the United States. In November 2024, we relocated from our 99,000 square foot facility in Reno, Nevada to our new 390,240 square foot facility also in Reno, Nevada, which has allowed us to increase our production capacity and gives us the ability to increase sales to existing customers and penetrate new markets. Our 390,240 square foot facility provides a streamlined, partially autonomous production process for our current batteries, which comprises module assembly and battery assembly, with the availability to expand the number of lines to handle increased volumes and the additional battery modules we intend to introduce in the near future. We also entered into a lease for use of an approximately 64,000 square foot facility to further increase our capacity to produce our patented dry electrode process (the “Fernley Lease Agreement”).

Through our Battle Born Batteries and Wakespeed brands, we operate in three primary consumer end markets: RVs, marine vessels, and off-grid storage systems. We are strategically expanding into additional markets, with a focus on trucking – including heavy-duty trucks and work trucks – and industrial markets – including oil and gas and industrial solar integration. Within our core markets, we focus on displacing lead-acid batteries with our technologically advanced and greener lithium-ion solutions. Our Battle Born Batteries portfolio is designed to provide customers with a reliable, long-lasting, and highly efficient off-grid power source.

We continue to leverage our proven sales and marketing strategy to efficiently penetrate our target end markets. We prioritize customer education through various channels, highlighting the distinct advantages of lithium-ion batteries over traditional lead-acid alternatives. Tradeshows, rallies, and industry events serve as key platforms for direct customer engagement, featuring product demonstrations, educational seminars, and opportunities for interaction with knowledgeable sales and technical experts. We further amplify our reach through a robust social media program, strategically partnering with content creators and industry influencers to disseminate product benefits to targeted audiences. Additionally, we cultivate relationships with industry publications to secure editorial coverage that informs and educates potential customers. We also employ a targeted pay-per-click (“PPC”) advertising campaigns across various platforms, including search engines, social media, and connected TV to efficiently convert high-intent customers at the bottom of the purchase funnel.

Drawing upon our success in collaborating with RV and marine OEMs, we have begun expanding into the heavy-duty trucking market. We are leveraging our expertise in designing and supporting lithium-ion storage systems to tailor solutions meeting specific requirements for fleets. These solutions have been adopted as factory options, demonstrating their value proposition for truck fleets seeking to:

This strategic approach has resulted in successful pilot programs with fleets representing over 15% of the North American heavy-duty trucking market, and has already resulted in several new arrangements, including Stevens Transport and Highway Transport.

In the Fall of 2024, a partnership with Alegacy – a packager of natural gas compression equipment – led to a successful demonstration of an uninterruptible battery powered vapor recovery unit (VRU) that exhibited methane leakage mitigation in a large (greater than 3000 hp) gas compression unit. We believe that this successful demonstration will pave the way for the aftermarket and OEM deployments of these lithium battery powered VRUs, beginning in 2025. The opportunity leverages our expertise in combining alternator charging and battery cycling, as well as our Class 1 Div 2 battery classification, which allows our battery systems to be deployed in the vicinity of oil & gas pipelines.

To augment our core lithium-ion battery pack business, we rely on our research and development department. The team has successfully developed innovative manufacturing processes for dry-electrode manufacturing of lithium-ion cells, and continues development efforts relating to next-generation solid-state technology. Since our inception, we have built a comprehensive patent portfolio around our proprietary dry-electrode battery manufacturing process, which eliminates the use of harmful solvents and energy-intensive drying ovens compared to traditional methods. This translates to significant environmental and cost benefits, including reduced energy consumption, smaller space requirements, and a lower carbon footprint.

Moreover, our solid-state technology in development removes the need for a liquid electrolyte, thereby addressing safety concerns related to flammability. Our unique competitive edge lies in the combination of solid-state technology with its scalable dry-electrode manufacturing process. This enables the rapid production of cells having an intercalation anode (like graphite or silicon), unlike many competitors reliant on less stable lithium metal anodes. We believe this design offers superior cyclability and safety, serving as a key differentiator in the energy storage market. Furthermore, internal production of both conventional and solid-state cells streamlines our supply chain and enables vertical integration, ultimately driving down production costs.

Industry Background

For decades, lead-acid batteries have been the dominant player in power and energy markets worldwide. Since the introduction of the absorbed glass mat (“AGM”) lead-acid battery in the mid-1970s, the technological advancements in lead-acid battery technology have been limited. LFP batteries have numerous advantages over the incumbent lead-acid batteries used in today’s markets:

End Markets

Current Markets

According to a Frost and Sullivan report commissioned by us in 2021 (“Frost & Sullivan”), the total addressable market (“TAM”) of our three current end markets was estimated to be approximately $12 billion by 2025.

Addressable Adjacent Markets

Our addressable markets are areas with significant growth potential that we will be positioned to penetrate as customers turn towards LFP and other lithium-ion batteries as replacements for traditional lead-acid batteries. As these medium- and long-term markets mature, we intend to deploy our solid-state technology, once developed, while concurrently continuing to further displace the incumbent lead-acid technology.

Our Competitive Strengths

We believe that we possess the largest share in the markets we operate in due to our following business strengths, which distinguish us in this competitive landscape and position us to capitalize on the anticipated continued growth in the energy storage market:

Our Growth Strategy

We intend to leverage our competitive strengths, technology leadership and market share position to pursue our growth strategy through the following:

Our Products and Technology

Chemistry Comparison

Lead-acid batteries were the first form of rechargeable battery to be developed and modified across different platforms for a variety of uses, from powering small electronics to use for energy storage in back-up power supplies in cell phone towers. Since the development in the 1970s of AGM lead-acid batteries, a form of sealed lead-acid battery that enables operation in any position, there has been limited innovation in lead-acid battery technology. The push to develop longer-lasting, lower-cost, more environmentally-friendly and faster-charging batteries has led to the development of lithium-ion batteries and, within the lithium-ion battery market, different chemistries.

There are several dominant battery chemistries in the lithium-ion market that can be used for different purposes. Two widely adopted chemistries found in the market today are nickel manganese cobalt (“NMC”), and nickel cobalt aluminum (“NCA”). The higher energy density and shorter cycle life found in NMC and NCA batteries are suitable for markets where fast charging and high energy density are required, such as electric vehicle (“EV”) powertrains and consumer electronics. LFP batteries are best suited for energy storage markets where long life and affordability are paramount, such as RV, marine vessel, off-grid storage, onboard tools, material handling, utility-grade storage, telecom, rail and data center markets.

NMC batteries are highly dependent on two metals that present significant constraints — nickel, which is facing an industry-wide shortage, and cobalt, a large percentage of which comes from conflict-ridden countries. According to an article by McKinsey & Company titled “Lithium and Cobalt: A tale of two commodities”, global forecasts for cobalt show supply shortages arising as early as 2022, slowing down NMC battery growth. Both of these elements are also subject to commodity price fluctuations, making NMC and NCA batteries less cost-effective than LFP batteries. LFP batteries do not contain these elements and materials can be sourced domestically, and are therefore not subject to these shortages, geopolitical concerns or commodity price fluctuations. In fact, LFP batteries have no toxic elements, offering a much safer environmental alternative. The temperature threshold for thermal runaway (i.e., lithium-ion battery overheating that can result in an internal chemical reaction) is higher for LFP batteries as compared to NMC and NCA batteries, making LFP batteries less flammable and safer.

LFP batteries have a useful life of approximately 10 to 15 years compared to one to two years for lead-acid batteries, and typically charge up to five times faster. LFP batteries are also not constrained by weight (having the same energy capacity at one-fifth of the weight) or temperature (having the ability to generate power even in low temperatures and to not swell or heat up when charging or discharging) and are generally maintenance free.

In the electric vehicle market, the race to provide the highest energy density facilitating frequent, rapid acceleration, greatest range and fastest charging battery — all while competing on cost — is where many new battery companies are prioritizing their efforts. Success in the electric vehicle market requires use of chemistries capable of optimization to these requirements. In our targeted stationary storage markets, the ideal solution requires a safe, long-lasting battery in terms of discharge/charge cycles with a focus on providing a steady power stream. LFP batteries are better suited for the stationary storage market compared to NMC and NCA batteries, as LFP batteries are safer and have a significantly longer life cycle making them more cost-effective. The market for utility grade storage, particularly for clean energy projects, and the related adoption of lithium-ion batteries (including LFP batteries) is expected to increase as the fully loaded cost of energy (production and storage) approaches cost parity with inexpensive fossil fuel energy provided through the electric grid. Compared to NMC and NCA batteries, LFP batteries are at or much closer to grid parity.

Dry Electrode Cell Manufacturing Technology

Since our inception, we have been developing proprietary dry-electrode manufacturing processes for which we have issued patents and pending patent applications, where appropriate. Dry-electrode manufacturing eliminates the use of toxic and expensive solvents and energy-intensive drying ovens in the cell manufacturing process. This in turn reduces the energy usage, space requirements, carbon footprint, and overall cost as compared to conventional slurry-based methods. Furthermore, the manufacturing technology is chemistry agnostic – meaning it can produce battery cells across a variety of different chemistries and application use cases. In 2023, we completed the construction of our dry-electrode manufacturing pilot line, demonstrated the ability to produce Anode and Cathode electrode tapes at scale using this manufacturing process. We have developed sample cells for prospective customers across a variety of chemistries and end-markets and are designing equipment for scaled production of full cells.

Solid-State Cells

LFP batteries are not without their disadvantages. While less flammable than other chemistries, the existence of a flammable liquid electrolyte still poses safety risks. Like all liquid-based lithium-ion batteries, LFP batteries have a potential to produce solid lithium dendrites, icicle-like formations which can pierce the physical separators in LFP batteries, which are necessary in LFP batteries to separate the positively charged liquid electrolyte from the negatively charged liquid electrolyte, and which, over time, will degrade the performance of LFP batteries and potentially result in fire-related risks. The next phase in the development of lithium-ion batteries is solid-state cell development, which contains a solid, rather than a liquid, electrolyte, eliminating many of the current disadvantages to LFP batteries while increasing the safety of the battery cells. We believe that the development of our solid-state technology will provide us with a unique competitive advantage.

Compared to current lithium-ion technology, where lithium-ions cross a liquid electrolyte barrier between a battery’s anode (negative electrode) and cathode (positive electrode), solid-state batteries aim to use a solid electrolyte to regulate the lithium-ions. As a battery charges and discharges, an electrochemical reaction occurs creating a flow of electrical energy between the cathode, electrolyte and anode as the electrodes lose and reacquire electrons. In addition to the use of non-toxic electrode components, the removal of a liquid electrolyte will eliminate the risk of fire, making solid-state cells inherently safe. The move to a non-liquid electrolyte also means that solid-state batteries will be, on average, smaller and lighter than existing lithium-ion batteries. The process for manufacturing our solid-state cells is described below under “— Research and Development”.

Our Products

We provide various industries with clean, reliable, and efficient power solutions through our comprehensive product portfolio. These products and solutions are sold to both OEMs and retail customers.

Our lead product line is Battle Born Batteries product line, respected for its exceptional performance and durability. When compared to traditional lead-acid options, Battle Born Batteries deliver two to three times the power in the same physical space, one-fifth the weight for equal usable power, and up to five times faster charging. Additionally, these batteries have extended lifespans of 3,000-5,000 cycles, translating to ten to fifteen years of reliable use under typical conditions. This longevity is backed by our 10-year warranty, showcasing our commitment to quality. The Battle Born Batteries product line currently features various sizes and configurations including models with proprietary built-in heating for cold weather charging and Dragonfly IntelLigence™, a communication technology that unlocks real-time monitoring, instant notifications, various protocol integration and superior battery protection. A focus on safety is central to our products, and all Battle Born Battery products utilize LiFePO4 chemistry, the safest lithium-ion chemistry available on the market. Additionally, our battery products undergo rigorous testing under stringent industry standards like UL Standard 2054, IEC 62133, UN 38.3 and IP65 to ensure safety and reliability.

Looking beyond batteries, we also offer a diverse range of power products.

Additionally, as a distributor of leading brands like Victron, Schneider, and REDARC, we act as a one-stop shop for full system integration, catering to both OEMs and retail customers. Our complete offering allows customers to benefit from clean and sustainable power, extended lifespans, reduced costs, increased efficiency, and seamless integration - all backed by expert service and support.

Battery Management System

Our proprietary battery management system is developed and tested in-house. It offers a complete solution for monitoring and controlling our complex battery systems and is designed to protect battery cells from damage in various scenarios. We believe our battery management system is industry-leading for a number of reasons:

Battery Communication System

We have developed a complete communication system branded Dragonfly IntelLigence, for which a U.S. non-provisional patent application and an international PCT patent application have been filed, to be used with Dragonfly Energy OEM systems and Battle Born batteries and bundles. This communication system will enable end customers to monitor each battery in real time, providing information on energy input and output and current or voltage imbalances. The communication system will be able to communicate with up to 24 batteries in a bank at one time and aggregate the data received from these batteries into a central system such as a phone or tablet. We began offering the Dragonfly IntelLigence product line to OEMs in the third quarter of 2024, and to retail consumers in the fourth quarter of 2024.

Alternator Regulation

Charging batteries in a vehicle, such as a boat or RV, often requires pulling electrical current off of the vehicle’s alternator. Alternator regulation is important to ensure that the alternator does not get unduly stressed during the current delivery to the batteries, and that the current delivery remains within the operating limits of the onboard battery bank. The acquisition of the assets of Wakespeed has allowed us to deliver our own proprietary solution to alternator regulation while also leveraging an established brand name. Wakespeed is especially popular in the marine industry, and our ability to offer this complete solution sets the stage for further penetration into marine markets.

Product Pipeline

Beyond our current battery modules, we have several LFP products in development that will enable us to access additional end markets.

Research and Development

Our research and development team has built up its efforts to support two main initiatives – (1) scale up of our patented dry electrode process for cell manufacturing and (2) the advanced manufacturing of solid-state lithium-ion batteries. We believe the dry electrode process can be leveraged to help us vertically integrate from a pack supplier to a cell supplier – positioning ourselves for long-term competitiveness in the given geopolitical, economic, and technological landscapes. Our innovations in dry electrode processing result in reduced manufacturing costs, CO₂ equivalents, and factory footprint while eliminating the need for solvents like N-Methyl-2-pyrrolidone (“NMP”). A third-party assessment conducted by Sphere Energy confirming these benefits has been completed in the first quarter of 2024 relating to cost effectiveness and sustainability of our dry electrode battery manufacturing process (the “Sphere Energy Assessment”).

The Sphere Energy Assessment concluded that our dry electrode battery manufacturing process resulted in a 9% reduced carbon footprint of cell manufacturing with no toxic NMP solvent required, resulting in a significantly more sustainable process. This sustainability advantage is further augmented by a 71% reduction in energy usage during electrode manufacturing using our process (spray drying, coating, calendaring) compared to standard cell manufacturing operations (slurry casting, drying, calendaring). By removing the need for large and expensive drying ovens, our manufacturing process requires 22% less square footage. The culmination of these advantages results in a 25% reduction in emissions from energy use, making our manufacturing process more sustainable and much more environmentally friendly as compared to conventional manufacturing methods.

In addition to the energy savings, the cost assessment found our process to be highly cost-effective with an estimated 5% savings (depending on cell chemistry) on process-related costs compared to conventional methods. Importantly, these savings were calculated without the additional cost benefits provided by domestically manufacturing battery cells such as Inflation Reduction Act tax credits (issued by the IRS), tariffs, and shipping.

The dry electrode battery manufacturing process we employ uses a patented spray coating technology to adhere the anode and cathode electrodes, eliminating the need for large, energy-intensive equipment such as slurry coaters, conveyor dryers, and NMP processing equipment. This process is chemistry agnostic, allowing for the various applications, such as electric vehicles, consumer electronics, and energy storage, which is expected to enable us to expand into new markets and to achieve our goal of domestically producing nonflammable all-solid-state battery cells.

We have successfully produced anode and cathode electrode reels at scale using the dry electrode process and are now qualifying prototype cells for the core business and potential partners. When compared to slurry cast electrode tapes, which is the conventional manufacturing method, electrode tapes produced using the dry electrode process match or surpass mechanical integrity and electrochemical performance. We are considering joint development agreements, licensing agreements, and offtake agreements as instruments of partnership with interested parties.

In comparison with traditional manufacturing methods, our patented process leverages two off-the-shelf technologies to deliver the stated cell manufacturing benefits – spray drying and electrostatic powder coating. Technical risk is reduced by using off-the-shelf equipment and both unit operations continue to be optimized in 2025. A new set of spray dryers have arrived at our facility in the second quarter of 2024, enabling us to produce larger volumes of material for the electrode coating lines. However, we have delayed the deployment of these spray dryers until at least the third quarter of 2025 as we focus on designing larger-scale electrode coating equipment.

We have developed our patented to be chemistry agnostic and capable of producing current cell chemistries (graphite, LCO, LFP, LTO, NCA, NMC, LTO, silicon, etc.) and next generation cell chemistries (sodium-ion, solid-state, ionic liquid electrolytes, etc.). We believe this flexibility and our robust intellectual property protection internationally positions us well for potential partnerships with cell manufacturers, EV companies, and other pack suppliers in need of cell capacity. The next stage in technical development is to produce larger volumes of sample cells for qualification. These production runs will be completed with partners in the United States and at our own facilities . We have invested significant resources into developing an in-house comprehensive understanding of cell manufacturing – raw material qualification, quality control such as, cell failure diagnostics, aging, and formation processes. Our research and development Lab is equipped with over $20 million in research infrastructure to support the development of new cell chemistries, process quality control, failure diagnostics, and more. This equipment includes quality control instruments (ex. moisture analysis, particle size analysis, peel testing and titrations) and cutting-edge research instrumentation such as en operando nuclear magnetic resonance (“NMR”), electron microscopes with lithium-tracking capabilities, and en operando x-ray diffraction. This infrastructure has allowed us to optimize the dry-electrode process, allowing our team to match or surpass traditional electrode tape performance and mechanical integrity. Because our process is dry and the active material is coated directly onto the current collector, interfacial and composite resistivity of the electrode tapes often surpass the quality of slurry cast equivalents.

Our solid-state technology continues to progress as we qualify new chemistries and refine the dry electrode process for solid-state applications. Currently, we are cycling solid-state coin cells, although we have delayed the production of prototype pouch cells until at least the beginning of 2026. These cell chemistries are nonflammable, solid-state, and an LFP/graphite cell chemistry. We believe these cells will be a pivotal technology in grid storage applications once fully deployed. We intend to integrate our conventional and solid-state cells produced using our dry-electrode process into the existing Dragonfly Energy and Battle Born Batteries product portfolios.

Headquarters, Manufacturing, and Production

On February 8, 2022, we entered into a 124-month lease for an additional 390,240 square foot warehouse. In November 2024, we relocated our headquarters from our 99,000 square foot facility in Reno, Nevada to our new 390,240 square foot facility also in Reno, Nevada, which has allowed us to increase our production capacity and gives us the ability to increase sales to existing customers and penetrate new markets. Our 390,240 square foot facility provides a streamlined, partially autonomous production process for our current batteries, which comprises module assembly and battery assembly, with the availability to expand the number of lines to handle increased volumes and the additional battery modules we intend to introduce in the near future. We do not own any real estate property. We currently have two production lines with another line currently in construction. We continue to have the capability to expand our production volumes and line quantities to support increased volumes of new products we intend to introduce soon.

On April 12, 2024, we entered into the Fernley Lease Agreement pursuant to which we agreed to lease an approximately 64,000 square foot facility (the “Premises”) in Fernley, Nevada, to be used for general, warehousing, assembly/light manufacturing, painting of products, storage fulfillment, distribution of our products, and other uses as permitted under in the Fernley Lease Agreement.

Our manufacturing process is divided into two aspects – (1) module assembly and (2) battery assembly. We use a combination of trained employees and automated processes to increase production capacity and lower costs while maintaining the same level of quality our customers expect from our products. Module assembly is a significantly automated process, implementing custom-designed equipment and systems to suit our production needs. This includes cycling of individual cells to detect faulty components and to enable sorting by capacity. Our custom-designed automated welders spot weld individual cells that are assembled into specified module jigs based on the desired amp hour. Completed modules are then fully discharged, recharged fully, and sorted by capacity. Battery assembly is performed largely by hand by our trained employees, although we continue to look for innovative ways to integrate automation into this process. Our proprietary battery management system is thoroughly tested for quality cutoffs, then mounted onto individual modules, before the modules are bolted into its casing. We aim to automate the battery management system testing and installation process, which we expect could increase production capacity fourfold. We are currently implementing an automated process for the gluing and sealing process, which would incorporate a two-robot system for gluing and epoxying, as well as a glue pallet system to move finished batteries. After the assembled batteries are tested and sealed, they are processed for outbound distribution.

Supplier Relationships

We have a well-established, global supply chain that underlies the sourcing of the components for our products, although we source domestically wherever possible. We aim to maintain approximately six months’ worth of all components, other than cells, which we pre-order in advance for the year to ensure adequate supply. For nearly all of our components, other than our battery management system, we ensure that we have alternative suppliers available. Our battery management system is sourced from a single supplier based in China who we have a nearly 10-year relationship with and who manufactures this component exclusively for us based on our proprietary design. Our cells are sourced from two different, carefully selected cell manufacturers in China who are able to meet our demanding quality standards. As a result of our long-standing relationships with these suppliers, we are able to source LFP cells on favorable terms and within reasonable lead-times.

As we look toward the production of our traditional and solid-state cells, we have signed a Commercial Offtake Agreement with a lithium mining company and a lithium recycling company, both located in Nevada for the supply of lithium.

Customers; RV OEM Strategic Arrangements

We currently serve more than 23,000 customers in North America. Our existing customers consist of leading OEMs (such as Keystone, THOR, REV Group and Airstream); distributors (who purchase large quantities of batteries from us and sell to consumers); upfitters (who augment or customize vehicles for specific needs); and retail customers (who purchase from us directly). For the years ended December 31, 2024 and 2023, OEM sales represented 54.5% and 42.7% of our total revenues, respectively.

We have deep, long-standing relationships with many of our customers. We also have a diverse customer base, with our top 10 customers accounting for 47.4% of our revenue for the year ended December 31, 2024, in which only one customer accounted for more than 10% of our revenue. Our customers primarily utilize our products for RVs, marine vessels and off-grid residences. We work directly with OEMs to ensure compatibility with existing designs and also collaborate on custom designs for new applications.

The RV market is characterized by low barriers to entry. In North America, there are two large publicly traded RV companies, THOR Industries and REV Group, in addition to a number of independent RV OEMs. THOR and REV each own a number well-known RV OEM brands and their related companies. These brands compete on a number of factors such as format (e.g., motorized or towable), price, design, value, quality and service. On November 19, 2021, we entered into a long-term Manufacturing Supply Agreement with Keystone, a member of the THOR group and the largest towable RV OEM in North America (the “Supply Agreement”). Under the Supply Agreement, we will be the exclusive supplier to Keystone for certain of its future LFP battery requirements, solidifying our long standing relationship with Keystone.

In July 2022, we strengthened our ties with the THOR group of RV OEMs when (i) THOR Industries made a $15,000,000 strategic investment in us and (ii) we agreed to enter into a future, mutually agreed distribution arrangement and joint IP development arrangement. This arrangement helps facilitate our ongoing efforts to drive adoption of our products (leveraging the trend of LFP batteries increasingly replacing lead-acid batteries) by, among other things, increasing the number of RV OEMs that “design in” our batteries as original equipment and entering into arrangements with members of the various OEM dealer networks to stock our batteries for service and for aftermarket replacement sales. Once the distribution agreement has been negotiated and signed, during a to-be-agreed transition period, we will use commercially reasonable efforts to cease marketing and selling our products to other RV OEMs and suppliers to RV OEMs in North America. Although the full distribution agreement with THOR has not been executed and is subject to negotiation in the future, its terms are expected to include: (i) an initial term of 24 months, which THOR may renew for successive one-year periods; (ii) a requirement that we be the sole provider of lithium-ion batteries to the US-based THOR family of companies for THOR sales in the United States, subject to agreed exceptions; (iii) favored pricing for products and negotiated rebates or other incentives; (iv) a requirement that THOR and its North American OEMs be our exclusive RV OEM customers for our products in North America, subject to agreed exceptions; and (v) agreeable terms with respect to registered and unregistered intellectual property rights and technology rights (which do not include our existing intellectual property, including our solid-state battery technologies and related IP rights), including necessary licenses between the parties, third party licenses, and allocation of ownership of any intellectual property rights and/or technology rights developed as a result of development efforts jointly undertaken between THOR and us, subject to certain limitations.

We continue to seek to grow our customer base within our existing segments; however, we also believe that our products are well suited to address the needs in additional segments, including residential, commercial and/or industrial standby power, long-haul trucking, industrial vehicles (such as forklifts, material handling equipment and compact construction equipment) and specialty vehicles (such as emergency vehicles, utility vehicles and municipal vehicles) and we will seek to expand our market share in these segments in the future.

Sales and Marketing

Our proven sales and marketing strategy has allowed us to penetrate our current end markets efficiently. We have established a highly efficient sales and marketing strategy, to penetrate targeted end markets and ensuring prominent visibility for our Battle Born Batteries and Wakespeed brands. We prioritize educating our customer base about the benefits of LFP batteries as a superior investment compared to traditional lead-acid options. Informational videos published on our website and social media platforms highlight these advantages, complemented by written guides that assist customers in configuring, installing, and utilizing battery systems and accessories. This messaging is further reinforced through our active presence at tradeshows, live webinars, and other in-person training events with dealers and customers, fostering direct engagement and ensuring comprehensive product understanding. Participation in these events fosters strong relationships with both OEMs and retail customers, keeping us attuned to evolving preferences. By leveraging this customer feedback, we collaborate with major OEMs to design solutions tailored to new and existing applications.

In addition to traditional print and digital advertising, we harness the significant influence of social media platforms like YouTube, Instagram, and Facebook, through affiliate marketing. We partner with established content creators and influencers to cultivate lasting relationships that showcase product performance organically, beyond mere one-off promotions. Organic integration of our products in television shows, podcasts and other similar sponsorships further amplifies brand awareness. Additionally, we foster relationships with key industry publications, securing valuable editorial coverage that showcases our innovative power solutions and how they are used. We believe these strategic collaborations position our brands as industry leaders within our markets and to the general public as a whole, further strengthening brand awareness and consumer confidence.

We also leverage targeted pay-per-click advertising campaigns across various platforms, including search engines, social media, and connected TV. This data driven approach ensures efficient conversion of high-intent customers at the bottom of the purchase funnel, maximizing return on investment and driving targeted brand awareness among potential buyers.

Direct relationships with retail customers remain a core value. Our user-friendly website facilitates direct purchases of Battle Born Batteries and Wakespeed products, along with well-known third-party components, allowing customers to explore and acquire complete system solutions in one convenient location. Furthermore, a dedicated team of in-house experts provides comprehensive sales, technical, and service support to ensure our valued customers receive exceptional care and expertise.

Competition

The energy storage market is highly competitive, with traditional lead-acid batteries still dominating. However, lithium-ion adoption continues to grow as customers seek better performance and longer lifespans. We compete with traditional lead-acid manufacturers and distributers, such as East Penn, Trojan, and Interstate and companies importing and white-labeling low-cost lithium products. This influx of inexpensive overseas batteries has intensified price competition. We believe our products stand out through American design and assembly, premium components, superior customer service, and full system design capabilities. Our batteries are lighter and longer-lasting compared to traditional lead-acid batteries, and easy to install as direct replacements for lead-acid batteries. Proprietary technologies, including advanced battery management systems, integrated heat capabilities, and intelligent battery communication, ensure reliable, high-performance energy storage as compared to traditional lead-acid batteries and other lithium-ion products.

With regard to solid-state technology, we have two main competitors, QuantumScape and Solid Power. While both of these competitors are focused on the development of solid-state technology for use in the propulsion of electric vehicles, we are focused on power storage applications, which has different requirements. We believe that our proprietary processes, systems and materials provide us with a significant competitive advantage in developing a fully solid-state, non-toxic and highly cost-effective energy solution.

As our solid-state technology comes to fruition and we begin to commercialize this product, we intend to become a vertically integrated battery company, internalizing all aspects of the manufacturing and assembly process. This is comparable to companies such as Tesla, BYD Limited and Li-Cycle. Our solid-state technology will also enable us to further penetrate the energy storage market, and we expect to compete with technology-focused energy storage companies such as EOS Energy, ESS and STEM.

Intellectual Property

The success of our business and our technology leadership is supported by our proprietary battery technology. We have received patents and filed patent applications in the United States and other jurisdictions to provide protection for our technology. We rely upon a combination of patent, trademark and trade secret laws in the United States and other jurisdictions, as well as license agreements and other contractual protections, to establish, maintain and enforce rights in our proprietary technologies. In addition, we seek to protect our intellectual property rights through non-disclosure and invention assignment agreements with our employees and consultants and through non-disclosure agreements with business partners and other third parties.

As of December 31, 2024, we owned 44 issued patents and 39 filed and pending patent applications. The pending patent applications are down from prior year since we abandoned 9 that were no longer useful. The patents and patent applications cover the United States, Canada, Australia, Korea, Japan, India, China, and Europe (with individual patents in Germany, France and the United Kingdom). We periodically review and update our patent portfolio to protect our products and newly developed technologies. Currently, we have a combination of issued patents and pending patent applications covering the ornamental design of our GC2 and GC3 batteries, a device and method for monitoring battery systems, pre-coated solid-state electrolyte and electroactive powders and their methods of manufacture, methods and systems for the dry spray deposition of materials in an electrochemical cell; a thermal fuse; battery systems implementing a mesh network communication protocol; a power charging system for use during towing of a vehicle; and a power charging system with temperature based charging control. These patents are expected to have expired or expire between May 2033 and 2043, absent any patent term adjustments or extensions.

We periodically review our development efforts to assess the existence and patentability of new intellectual property. We pursue the registration of our domain names and trademarks and service marks in the United States and other jurisdictions. In an effort to protect our brand, as of December 31, 2024, we owned 38 trademarks globally. Dragonfly owns 16 trademark registrations to cover our house marks in the United States and we have 7 registered trademark relating to our design logos and slogans in the United States and we have 22 registered trademarks internationally with 10 other international trademark applications pending.

Government Regulation and Compliance

We currently operate from a dedicated leased manufacturing facility located in Reno, Nevada as well as a leased R&D facility in Sparks, Nevada. We have never owned any facility at which we operated. Operations at our facilities are subject to a variety of environmental, health and safety regulations, including those governing the generation, handling, storage, use, transportation, and disposal of hazardous materials. To conduct our operations, we have to obtain environmental, health, and safety permits and registrations and prepare plans. We are subject to inspections and possible citations by federal, state, and local environmental, health, and safety regulators. In transit, lithium-ion batteries are subject to rules governing the transportation of “dangerous goods.” We have policies and programs in place to assure compliance with our obligations, such as policies relating to workplace safety, fire prevention, hazardous material management and other emergency action plans. We train our employees and conduct audits of our operations to assess our fulfillment of these policies.

We are also subject to laws imposing liability for the cleanup of releases of hazardous substances. Under the law, we can be liable even if we did not cause a release on real property that we lease. We believe we have taken commercially reasonable steps to avoid such liability with respect to our current leased facilities.

Employees and Human Capital Resources

As of December 31, 2024, we had 144 employees: 139 full-time, 2 part-time and 3 interns. We have adopted our Code of Ethics to support and protect our culture, and we strive to create a workplace culture in line with our values: “Tell the Truth,” “Be Fair,” “Keep Your Promises,” “Respect Individuals,” and “Encourage Intellectual Curiosity.” As part of our initiative to retain and develop our talent, we focus on these key areas:

Attracting and retaining high quality talent at every level of our business is crucial to our continuing success. We have developed relationships with the University of Nevada Reno and the Nevada System of Higher Education to further our recruitment reach. We provide competitive compensation and benefits packages, including performance-based compensation that rewards individual and organizational achievements.

Corporate Information

In October 2022, we completed the merger in connection with our business combination. On March 31, 2023, we changed our state of incorporation from the State of Delaware to the State of Nevada (the “Reincorporation”) pursuant to a plan of conversion dated March 30, 2023.The mailing address of our principal executive office is 12915 Old Virginia Road, Reno, Nevada 89521, and our telephone number is (775) 622-3448.

On November 22, 2024, we effected a reverse stock split of our issued and outstanding common stock at a ratio of 1-for-9 (the “Reverse Stock Split”). Shares of common stock underlying outstanding stock options and other equity instruments convertible into common stock were proportionately reduced and the respective exercise prices, if applicable, were proportionately increased in accordance with the terms of the agreements governing such securities in connection with the Reverse Stock Split. No fractional shares were issued in connection with the Reverse Stock Split. Any fractional shares of common stock resulting from the Reverse Stock Split were rounded up to the nearest whole number. All of our historical share and per share information related to issued and outstanding common stock and outstanding options and warrants exercisable for common stock included or incorporated by reference in this prospectus have been adjusted, on a retroactive basis, to reflect the Reverse Stock Split.

We file periodic reports, proxy statements and other information with the SEC. Such reports, proxy statements and other information may be obtained, free of charge, by visiting the SEC’s website at www.sec.gov that contains all of the reports, proxy and information statements, and other information that we electronically file or furnish to the SEC. We also maintain a website at www.dragonflyenergy.com where we make available the proxy statements, press releases, registration statements and reports on Forms 3, 4, 8-K, 10-K and 10-Q that we (and in the case of Section 16 reports, our insiders) file with the SEC. These forms are made available as soon as reasonably practicable after such material is electronically filed with or furnished to the SEC. Press releases are also issued via electronic transmission to provide access to our financial and product news, and we provide notification of and access to voice and internet broadcasts of our quarterly and annual results. Our website also includes investor presentations and corporate governance materials.

Item 1A. Risk Factors

An investment in our common stock is speculative and illiquid and involves a high degree of risk including the risk of a loss of your entire investment. You should carefully consider the risks and uncertainties described below and the other information contained in this report and our other reports filed with the Securities and Exchange Commission (the “SEC”). The risks set forth below are not the only ones facing us. Additional risks and uncertainties may exist that could also adversely affect our business, operations and financial condition. If any of the following risks actually materialize, our business, financial condition and/or operations could suffer. In such event, the value of our common stock could decline, and you could lose all or a substantial portion of the money that you pay for our common stock.

Summary of Risk Factors

Risks Related to Our Existing Lithium-Ion Battery Operations

Risks Related to Our Solid-State Technology Development

Risks Related to Supply chain and Third-Party Vendors

Risks Related to Intellectual Property

General Risk Factors

Risks Related to Being a Public Company

Risks Related to Our Financial Position and Capital Requirements related our ability to continue as a going concern

Risks Related to Ownership of Our Common Stock

Risks Related to Our Existing Lithium-Ion Battery Operations

Our business and future growth depends on the needs and success of our OEM’s and similar customers.

The demand for our products, including sales to OEMs, ultimately depends on consumers in our current end markets (primarily owners of RVs, marine vessels and off-grid residences). The performance and growth of these markets is impacted by numerous factors, including macro-economic conditions, consumer spending, travel restrictions, fuel costs and energy demands (including an increasing trend towards the use of green energy). Increases or decreases in these variables may significantly impact the demand for our products. If we fail to accurately predict demand, we may be unable to meet our customers’ needs, resulting in the loss of potential sales, or we may produce excess products, resulting in increased inventory and overcapacity in our production facilities, increasing our unit production cost and decreasing our operating margins.

An increasing proportion of our revenue has been and is expected to continue to be derived from sales to RV OEMs. Our RV OEM sales have been on a purchase order basis, without firm revenue commitments, and we expect that this will likely continue to be the case. For example, under our Supply Agreement with Keystone RV Company, or Keystone, the largest manufacturer of towable RVs in North America, Keystone has agreed to fulfill certain of its LFP battery requirements exclusively through us for at least one year, with automatic annual renewals. However, although in time we expect Keystone to be significant contributor to our projected growth in RV OEM battery sales, this arrangement may not deliver the anticipated benefits, as there are no firm purchase commitments, sales will continue to be made on a purchase order basis, Keystone is permitted to purchase other LFP batteries from third parties and this arrangement may not be renewed. In addition, in July 2022, we agreed to a strategic investment by THOR Industries, or THOR, which, among other things, contemplates a future, mutually agreed exclusive distribution agreement with THOR in North America. Although we expect that THOR will be a be significant contributor to our projected growth in RV OEM battery sales, this arrangement may not deliver the anticipated benefits and this distribution agreement may, in the future, preclude us from dealing with other large RV OEMs and their associated brands in North America or otherwise could negatively impact our relationships with those RV OEMs to whom we may be permitted to supply our batteries. In July 2023, we were notified by Keystone that, due to weaker demand for its products and their subsequent focus on reducing costs, it would no longer install our storage solutions as standard equipment, but rather return to offering those solutions as an option to dealers and consumers. While Keystone has not moved to a different solution or competitor, as a result in this change in strategy there was a material limiting effect on our revenue in 2023. Increased overall RV OEM sales in the future may not materialize as expected or at all and we may fail to achieve our targeted sales levels. Future RV OEM sales are subject to a number of risks and uncertainties, including the number of RVs that these OEMs manufacture and sell (which can be impacted by a variety of events including those disrupting our OEM customers’ operations due to supply chain disruptions or labor constraints); the degree to which our OEM customers incorporate/design-in our batteries into their RV product lines and renew our supply agreements; the extent to which RV owners, if applicable, opt to purchase our batteries upon initial purchase of their RV or in the aftermarket; and our continued ability to successfully develop and introduce reliable and cost-effective batteries meeting evolving industry standards and customer specifications and preferences. Our failure to adequately address any of these risks may result in lost sales which could have a material adverse effect on our business, financial condition and results of operations.

In addition, our near-term growth depends, in part, on the continued growth of the end markets in which we currently operate. Although the total addressable market for RVs, marine vessels and off-grid residences is estimated to reach $12 billion by 2025, these markets may not grow as expected or at all, and we may be unable to maintain existing customers and/or attract new customers in these markets. Our failure to maintain or expand our share of these growing markets could have a material adverse effect on our business, financial condition and results of operations.

We may not be able to engage target customers successfully and convert these customers into meaningful orders in the future.

Our success, and our ability to increase sales and operate profitably, depends on our ability to identify target customers and convert these customers into meaningful orders, as well as our continued development of existing customer relationships. Although we have developed a multi-pronged sales and marketing strategy to penetrate our end markets and reach a range of customers, this strategy may not continue to be effective in reaching or converting target customers into orders, or as we expand into additional markets. Recently, we have also dedicated more resources to developing relationships with certain key RV OEMs, such as Keystone, which we aim to convert into collaborations on custom designs and/or long-term contractual arrangements. We may be unable to convert these relationships into meaningful orders or renew these arrangements going forward, which may require us to expend additional cost and management resources to engage other target customers. However, in July 2023, we were notified by Keystone that, due to weaker demand for its products and their subsequent focus on reducing costs, it would no longer install our storage solutions as standard equipment, but rather return to offering those solutions as an option to dealers and consumers. While Keystone has not moved to a different solution or competitor, as a result in this change in strategy there was a material limiting effect on our revenue in 2023 and in 2024.

Our sales to any future or current customers may decrease for reasons outside our control, including loss of market share by customers to whom we supply products, reduced or delayed customer requirements, supply and/or manufacturing issues affecting production, reputational harm or continued price reductions. Furthermore, in order to attract and convert customers we must continue to develop batteries that address our current and future customers’ needs. Our failure to achieve any of the foregoing could have a material adverse effect on our business, financial condition and results of operations.

We operate in a competitive industry. We expect that the level of competition will increase and the nature of our competitors will change as we develop new LFP battery products for, and enter into, new markets, and as the competitive landscape evolves. These competitive and other factors could result in lost potential sales and lower average selling prices and profitability for our products.

We compete with traditional lead-acid battery manufacturers and lithium-ion battery manufacturers, who primarily either import their products or components or manufacture products under a private label. As we continue to expand into new markets, develop new products and move towards production of our solid-state cells, we will experience competition with a wider range of companies. These include companies focused on solid-state cell production, vertically integrated energy companies and other technology-focused energy storage companies. We believe our main competitive advantage in displacing incumbent lead-acid batteries is that we produce a lighter, safer, higher performing, cost-effective battery with a longer lifespan. We believe our go-to-market strategy, established brands, proven reliability and relationships with OEMs and end consumers both (i) enable us to compete effectively against other battery manufacturers and (ii) position us favorably to expand into new addressable markets. However, OEM sales typically result in lower average selling prices and related margins, which could result in overall margin erosion, affect our growth or require us to raise our prices. As a result, we may be unable to maintain this competitive advantage given the rapidly developing nature of the industry in which we operate.

Our current competitors have, and future competitors may have, greater resources than we do. Our competitors may be able to devote greater resources to the development of their current and future technologies. These competitors may also be able to devote greater resources to sales and marketing efforts, affording them greater access to customers, and may be able to establish cooperative or strategic relationships amongst themselves or with third parties that may further enhance their competitive positioning. In addition, foreign producers may be able to employ labor at significantly lower costs than producers in the United States, expand their export capacity and increase their marketing presence in our major end markets. We expect actual and potential competitors to continue their efforts to develop alternative battery technologies and introduce new products with more desirable, attractive features. These new technologies and products may be introduced sooner than our offerings and could gain greater market acceptance. Although we believe we are a leader in developing solid-state battery technology (particularly for energy storage applications) new competitors may emerge, alternative approaches to solid-state battery technology may be developed and competitors may seek to market solid-state battery technologies better suited for other applications such as EV’s to our target markets.

Additional competitive and other factors may result in lost sales opportunities and declines in average sales prices and overall product profitability. These include rapidly evolving technologies, industry standards, economic conditions and end-customer preferences. Our failure to adapt to or address these factors as they arise could have a material adverse effect on our business, financial condition and results of operations.

We may not succeed in our medium- and long-term strategy of entering into new end markets for LFP batteries and our success depends, in part, on our ability to successfully develop and manufacture new products for, and acquire customers in, these new markets and successfully grow our operations and production capabilities (including, in time, our ability to manufacture solid-state cells in-house).

Our future success depends, in part, upon our ability to expand into additional end markets identified by us as opportunities for our LFP batteries. These markets include heavy-duty trucking, industrial solar integration, specialty and work vehicles, material handling, rail, and emergency and standby power in the medium term, and data centers, telecom and distributed on-grid storage in the longer term. Our ability to expand into these markets depends on a number of factors, including the continued growth of these markets, having sufficient capital to expand our product offerings (including in the longer term batteries incorporating, once developed, our solid-state cells) and manufacturing capacity, developing products adapted to customer needs and preferences in these markets, our successful expansion of our manufacturing capabilities in order to meet customer demand, our ability to identify and convert potential customers within these markets and our ability to attract and retain qualified personnel to assist in these efforts. Although we intend to devote resources and management time to understanding these new markets, we may face difficulties in understanding and accurately predicting the demographics, preferences and purchasing habits of customers and consumers in these markets. If we fail to execute on our growth strategies in accordance with our expectations, our sales growth would be limited to the growth of existing products and existing end markets, and this could have a material adverse effect on our business, financial condition and results of operations.

Further, if we are unable to manage the growth of our operations effectively to match the growth in sales, we may incur unexpected expenses and be unable to meet our customers’ requirements, which could materially adversely affect our business, financial condition and results of operations. A key component of our growth strategy is the expansion and automation of our manufacturing sales capacity to address expected growing product demand and to accommodate our production of solid-state cells at scale. We have experienced supply delays in obtaining the necessary components to implement our automated adhesive application systems, as well as our pilot production line for our solid-state cells, and we may continue to experience component shortages in the future, which may negatively impact our ability to achieve these aspects of our growth strategy on time or at all. The costs of our expansion and automation efforts may be greater than expected, and we may fail to achieve anticipated cost efficiencies, which could have a material adverse effect on our business, financial condition and results of operations. We must also attract, train and retain a significant number of skilled employees, including engineers, sales and marketing personnel, customer support personnel and management, and the availability of such personnel may be constrained. Failure to effectively manage our growth could also lead us to over-invest or under-invest in development and operations; result in weaknesses in our infrastructure, systems or controls; give rise to operational mistakes, financial losses, loss of productivity or business opportunities; and result in loss of employees and reduced productivity of remaining employees, any of which could have a material adverse effect on our business, financial condition and results of operations.

We currently rely on two suppliers to provide our LFP cells and a single supplier for the manufacture of our battery management system. Any disruption in the operations of these key suppliers could adversely affect our business and results of operations.

We currently rely on two carefully selected cell manufacturers located in China, and a single supplier, also located in China, to manufacture our proprietary battery management system, and we intend to continue to rely on these suppliers going forward.

Our dependence on a limited number of key third-party suppliers exposes us to challenges and risks in ensuring that we maintain adequate supplies required to produce our LFP batteries. Although we carefully manage our inventory and lead-times, we may experience a delay or disruption in our supply chain and/or our current suppliers may not continue to provide us with LFP cells or our battery management systems in our required quantities or to our required specifications and quality levels or at attractive prices. Our close working relationships with our China-based LFP cell suppliers to-date, reflected in our ability to increase our purchase order volumes (qualifying us for related volume-based discounts) and to order and receive delivery of cells in advance of required demand, has helped us moderate or offset increased supply-related costs associated with inflation, currency fluctuations and tariffs imposed on our battery cell imports by the U.S. government and avoid potential shipment delays. If we are unable to enter into or maintain commercial agreements with these suppliers on favorable terms, or if any of these suppliers experience unanticipated delays, disruptions or shutdowns or other difficulties ramping up their supply of products or materials to meet our requirements, our manufacturing operations and customer deliveries would be seriously impacted, potentially resulting in liquidated damages and harm to our customer relationships. Although we believe we could locate alternative suppliers to fulfill our needs, we may be unable to find a sufficient alternative supply in a reasonable time or on commercially reasonable terms.

Further, our dependence on these third-party suppliers entails additional risks, including:

We may not be able to accurately estimate future demand for our LFP batteries, and our failure to accurately predict our production requirements could result in additional costs or delays.

We seek to maintain approximately a six-month supply of LFP cells and other critical components by pre-ordering in advance of expected demand. However, our business and customer product demand is impacted by trends and factors that may be outside our control. Therefore, our ability to predict our manufacturing requirements is subject to inherent uncertainty. Lead times for materials and components that our suppliers order may vary significantly and depend on factors such as the specific supplier, contract terms and demand for each component at a given time. If we fail to order sufficient quantities of product components in a timely manner, the delivery of our batteries to our customers could be delayed, would harm our business, financial condition and results of operations.

To meet our delivery deadlines, we generally make significant decisions on our production level and timing, procurement, facility requirements, personnel needs and other resources requirements based on our estimate of demand, our past dealings with such customers, economic conditions and other relevant factors. Although we monitor our slow-moving inventory, if customer demand declines significantly, we may have excess inventory which could result in unprofitable sales or write-offs. Expediting additional material to make up for any shortages within a short time frame could result in increased costs and a delay in meeting orders, which would result in lower profits and negatively impact our reputation. In either case, our results of operations would fluctuate from period to period.

In addition, certain of our competitors may have long-standing relationships with suppliers, which may provide them with a competitive pricing advantage for components and reduce their exposure to volatile raw material costs, including due to inflation. As a result, we may face market-driven downward pricing pressures in the future, which may run counter to the cost of the components required to produce our products. During 2022 in particular, we experienced rising materials costs due to inflation, which we partially mitigated through increases in our product prices, where we thought it to be prudent. Our customers may not view this favorably and expect us to cut our costs further and/or to lower the price of our products. We may be unable to increase our sales volumes to offset lower prices (if we choose to implement lower prices), develop new or enhanced products with higher selling prices or margins, or reduce our costs to levels enabling us to remain competitive. Our failure to accomplish any of the foregoing could have a negative impact on our profitability and our business, financial condition and results of operations may ultimately be materially adversely affected.

We are currently dependent on one manufacturing facility. If our facility becomes inoperable for any reason, or our automation and expansion plans do not yield the desired effects, our ability to produce our products could be negatively impacted.

All of our battery assembly currently takes place at our 390,240 square foot headquarters and manufacturing facility located in Reno, Nevada. We also entered into the Fernley Lease Agreement in April 2024 for use of an approximately 64,000 square foot facility to further increase our capacity to produce our patented dry electrode process. We currently operate three LFP battery production lines, which has been sufficient to meet customer demand. If one or several production lines were to become inoperable for any period of time, we would face delays in meeting orders, which could prevent us from meeting demand or require us to incur unplanned costs, including capital expenditures.

Our facilities may be harmed or rendered inoperable by natural or man-made disasters, including earthquakes, flooding, fire and power outages, utility and transportation infrastructure disruptions, acts of war or terrorism, or by public health crises, which may render it difficult or impossible for us to manufacture our products for an extended period of time. The inability to produce our products or the backlog that could develop if our manufacturing facility is inoperable for even a short period of time may result in increased costs, harm to our reputation, a loss of customers or a material adverse effect on our business, financial condition or results of operations. Although we maintain property damage and business interruption insurance, this insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, if at all.

Over the next several years we plan to automate additional aspects of existing LFP battery production lines, add additional LFP battery production lines (as required) and construct and operate a pilot production line for our solid-state cells, all designed to maximize the capacity of our manufacturing facility. In November 2024, we relocated our headquarters and production lines to a 390,240 square foot facility. Our plans for automation and expansion may experience delays, incur additional costs or cause disruption to our existing production lines. For example, we have experienced supply delays in obtaining the necessary components to implement our automated adhesive application systems, as well as our pilot production line for our solid-state cells, and we may continue to experience component shortages in the future. The costs to successfully achieve our expansion and automation goals may be greater than we expect, and we may fail to achieve our anticipated cost efficiencies, which could have a material adverse effect on our business, financial condition and results of operations. Furthermore, while we are generally responsible for delivering products to the customer, we do not maintain our own fleet of delivery vehicles and outsource this function to third parties. Any shortages in trucking capacity, any increase in the cost thereof or any other disruption to the highway systems could limit our ability to deliver our products in a timely manner or at all.

Lithium-ion battery cells have been observed to catch fire or release smoke and flame, which may have a negative impact on our reputation and business.

Our LFP batteries use lithium iron phosphate (LiFePO4) as the cathode material for lithium-ion cells. LFP is intrinsically safer than other battery technologies due to its thermal and chemical stability and LFP batteries are less flammable than lead-acid batteries or lithium-ion batteries using different chemistries. On rare occasions, however, lithium-ion cells can rapidly release the energy they contain by releasing smoke and flames in a manner that can ignite nearby materials and other lithium-ion cells. This faulty result could subject us to lawsuits, product recalls, or redesign efforts, all of which would be time consuming and expensive. Further, negative public perceptions regarding the suitability or safety of lithium-ion cells or any future incident involving lithium-ion cells, such as a vehicle or other fire, even if such incident does not involve our products, could seriously harm our business and reputation.

To facilitate an uninterrupted supply of battery cells, we store a significant number of lithium-ion cells at our facility. While we have implemented enhanced safety procedures related to the handling of the cells, any mishandling, other safety issue or fire related to the cells could disrupt our operations. In addition, any accident, whether occurring at our manufacturing facility or from the use of our batteries, may result in significant production interruption, delays or claims for substantial damages caused by personal injuries or property damage. Such damage or injury could lead to adverse publicity and potentially a product recall, which could have a material adverse effect on our brand, business, financial condition and results of operations.

We may be subject to product liability claims, which could harm our financial condition and liquidity if we are not able to successfully defend or insure against such claims.

Product liability claims, even those without merit or that do not involve our products, could result in adverse publicity or damage to our brand, decreased partner and end-customer demand, and could have a material adverse effect on our business, financial condition and results of operations. The occurrence of any defects in our products could make us liable for damages and legal claims. In addition, we could incur significant costs to correct such issues, potentially including product recalls. We face an inherent risk of exposure to claims in the event that our products do not perform or are claimed not to have performed as expected. We also face risk of exposure to claims because our products may be installed on vehicles (including RVs and marine vessels) that may be involved in crashes or may not perform as expected resulting in death, personal injury or property damage. Liability claims may result in litigation, the occurrence of which could be costly, lengthy and distracting and could have a material adverse effect on our business, financial condition and results of operations.

In the future, we may voluntarily or involuntarily initiate a recall if any products prove to be defective or non-compliant with then-applicable safety standards. Such recalls may involve significant expense and diversion of management attention and other resources, which could damage our brand image in our target end markets, as well as have a material adverse effect on our business, financial condition and results of operations.

A successful product liability claim against us could require us to pay a substantial monetary award. While we maintain product liability insurance, the insurance that we carry may not be sufficient or it may not apply to all situations. Moreover, a product liability claim against us or our competitors could generate substantial negative publicity about our products and business and could have a material adverse effect on our brand, business, financial condition and results of operations.

We currently rely on software and hardware that is complex and technical, and we expect that our reliance will increase in the future with the introduction of future products. If we are unable to manage the risks inherent in these complex technologies, or if we are unable to address or mitigate technical limitations in our systems, our business could be adversely affected.

Each of our batteries include our proprietary battery management system, which relies on software and hardware manufactured by third parties that is complex and technical. In addition, Dragonfly IntelLigence, our battery communications system which we launched in the first quarter 2023, utilizes third-party software and hardware to store, retrieve, process and manage data. The software and hardware utilized in these systems may contain errors, bugs, vulnerabilities or defects, which may be difficult to detect and/or manage. Although we attempt to remedy any issues that we observe in our products as effectively and rapidly as possible, such efforts may not be timely, may hamper production, or may not be to the satisfaction of our customers. If we are unable to prevent or effectively remedy errors, bugs, vulnerabilities or defects in the software and hardware that we use, we may suffer damage to our brand, loss of customers, loss of revenue or liability for damages, any of which could adversely affect our business, financial condition and results of operations.

Risks Related to Our Solid-State Technology Development

We face significant engineering challenges in our attempts to develop and manufacture solid-state battery cells and these efforts may be delayed or fail which could reduce consumer spending which could negatively impact our business.

Our solid-state battery development efforts are still ongoing, and we may fail to meet our goal of commercially selling LFP batteries incorporating our manufactured solid-state cells, or at all. We may encounter delays in the design, manufacture and launch of our solid-state battery cells, and in increasing production to scale.

Development and engineering challenges could delay or prevent our production of solid-state battery cells. These difficulties may arise in connection with current and future efforts to optimize the chemistry or physical structure of our solid-state batteries with the goal of enhancing conductivity and power; maximizing cycling capabilities and power results; reducing costs; and developing related mass production manufacturing processes. If we are unable to overcome developmental and engineering challenges, our solid-state battery efforts could fail.

We currently purchase the battery cells incorporated into our LFP batteries and have limited experience in manufacturing battery cells at a commercial scale. To cost-effectively and rapidly manufacture our solid-state cells at scale for incorporation into our LFP batteries, we plan to utilize currently available spray powder deposition equipment and other commercially available equipment modified to utilize our proprietary dry spray deposition and other technologies and processes. We may experience delays or additional costs in adapting our facility, existing production equipment and LFP battery manufacturing processes (for example, designing a dry room to accommodate our dry spraying processes) to manufacture solid-state cells. Even if we achieve the development and volume production of our solid-state battery that we anticipate, if the cost, cycling and power results or other technology or performance characteristics of the solid-state battery fall short of our targets, our business and results of operations would likely be materially adversely affected.

We expect to make significant investments in our continued research and development of solid-state battery technology development, and we may be unable to adequately control the costs associated with manufacturing our solid-state battery cells.

We will require significant capital to fund our solid-state cell research and development activities, pilot line construction and expansion of our manufacturing capabilities to accommodate large-scale production of solid-state cells. We have not yet produced any solid-state battery cells at volume and our forecasted cost advantage for the production of these cells at scale, compared to conventional lithium-ion cells, will require us to achieve rates of throughput, use of electricity and consumables, yield, and rate of automation demonstrated for mature battery, battery material, and ceramic manufacturing processes, that we have not yet achieved. We may not be able to achieve our desired cost benefits and, in turn, we may not be able to provide our solid-state cells at a cost that is attractive to customers. If we are unable to cost-efficiently design, manufacture, market, sell and distribute our solid-state batteries and services, our margins, profitability and prospects would be materially and adversely affected.

If our solid-state batteries fail to perform as expected, our ability to further develop, market and sell our solid-state batteries could be harmed.

Our solid-state battery cells may contain defects in design and manufacture that may cause them to not perform as expected or that may require repairs, recalls and design changes. Our solid-state batteries will incorporate components that have not been used individually or in combination in the same manner as the design of our solid-state cells, and that may result in defects and errors, particularly when produced at scale. We may be unable to detect and fix any defects in our solid-state battery cells prior to their incorporation into our solid-state LFP batteries and sale to potential consumers. If our solid-state batteries fail to perform as expected, we could lose customers, or be forced to delay deliveries, terminate orders or initiate product recalls, each of which could adversely affect our sales and brand and would have a material adverse effect on our business, financial condition and results of operations.

We expect to rely on machinery used in other large-scale commercial applications, modified to incorporate our proprietary technologies and processes, in order to mass produce solid-state battery cells, which exposes us to a significant degree of risk and uncertainty in terms of scaling production, operational performance and costs.

We expect to rely on machinery used in other large-scale commercial applications to mass produce our solid-state battery cells. Doing so will require us to work closely with the equipment provider to modify this machinery to effectively integrate our proprietary solid-state technology and processes in order to create the equipment we need for the production of solid-state cells. This integration work will involve a significant degree of uncertainty and risk and may result in delays in scaling up production of our solid-state cells or result in additional cost to us.

Such machinery is likely to suffer unexpected malfunctions from time to time and will require repairs and spare parts to resume operations, which may not be available when needed. Unexpected malfunctions may significantly affect the intended operational efficiency of, and therefore expected cost-efficiency associated with, our production equipment. In addition, because this machinery has not been used to manufacture and assemble solid-state battery cells, the operational performance and costs associated with repairing and maintaining this equipment can be difficult to predict and may be influenced by factors outside of our control, including failures by suppliers to deliver necessary components of our products in a timely manner and at prices acceptable to us, the risk of environmental hazards and the cost of any required remediation and damages or defects already present in the machinery.

Operational problems with our manufacturing equipment could result in personal injury to or death of workers, the loss of production equipment or damage to our manufacturing facility, which could result in monetary losses, delays and unanticipated fluctuations in production. In addition, we may be subject to administrative fines, increased insurance costs or potential legal liabilities. Any of these operational problems could have a material adverse effect on our business, financial condition and results of operations.

Risks Related to Supply Chain and Third-Party Vendors

We face risks associated with vendors from whom our products are sourced.

The products we sell rely on components and other inputs that are sourced from a variety of domestic and international vendors. We rely on long-term relationships with our suppliers but have no significant long-term contracts with such suppliers. Our future success will depend in large measure upon our ability to maintain our existing supplier relationships and/or to develop new ones. This reliance exposes us to the risk of inadequate and untimely supplies of various products due to political, economic, social, health, or environmental conditions, transportation delays, or changes in laws and regulations affecting distribution. Our vendors may be forced to reduce their production, shut down their operations or file for bankruptcy protection, which could make it difficult for us to serve the market needs and could have a material adverse effect on our business.

While we select these third-party vendors carefully, we do not control their actions or the manufacture of their products. Any problems caused by these third parties, or issues associated with their products or workforce, including customer or governmental complaints, breakdowns or other disruptions in communication services provided by a vendor, failure of a vendor to handle current or higher volumes, and cyber-attacks or security breaches at a vendor could subject us to litigation and adversely affect our ability to deliver products and services to its customers and have a material adverse effect on our results of operations and financial condition.

We rely on foreign manufacturers for various products that are incorporated into the products we sell. In addition, many of our domestic suppliers purchase a portion of their products from foreign sources. As an importer, our business is subject to the risks generally associated with doing business internationally, such as domestic and foreign governmental regulations, economic disruptions, global or regional health epidemics, delays in shipments, transportation capacity and costs, currency exchange rates, and changes in political or economic conditions in countries from which we purchase products. If any such factors were to render the conduct of business in particular countries undesirable or impractical or if additional U.S. quotas, duties, tariffs, taxes, or other charges or restrictions were imposed upon the importation of our products in the future, our financial condition and results of operations could be materially adversely affected.

The political landscape in the U.S. contains uncertainty with respect to tax and trade policies, tariffs and regulations affecting trade between the U.S. and other countries. We source a portion of our merchandise from manufacturers located outside the U.S., primarily in Asia. Major developments in tax policy or trade relations, such as the disallowance of tax deductions for imported merchandise or the imposition of tariffs on imported products, could have a material adverse effect on our business, results of operations, and financial condition.

We rely on manufacturers located in foreign countries, including China, for merchandise. Additionally, a portion of our domestically purchased merchandise is manufactured abroad. Our business may be materially adversely affected by risks associated with international trade, including the impact of current or potential tariffs by the U.S. with respect to certain consumer goods imported from China.

Changes in U.S. trade policy, including recently announced tariffs, could have a material adverse impact on our business, financial condition, and results of operations. We source a portion of our merchandise from manufacturers located outside the U.S., primarily in Asia, and many of our domestic vendors have a global supply chain. The U.S. has imposed tariffs on certain products imported into the U.S. from China and could propose additional tariffs. The imposition of tariffs on imported products could result in reduced sales and profits. It remains unclear how tax or trade policies, tariffs or trade relations may further evolve under the current U.S. administration, and how such policies could adversely affect our business, results of operations, effective income tax rate, liquidity, and net income.

In addition, the imposition of tariffs by the U.S. has resulted in the adoption of retaliatory tariffs by China on U.S. exports and could result in the adoption of tariffs by other countries as well. A resulting trade war could have a significant adverse effect on world trade and the global economy.

We continue to evaluate the impact of the effective and potential tariffs on our supply chain, costs, sales, and profitability as well as our strategies to mitigate any negative impact, including negotiating with our vendors, and seeking alternative sourcing options. Given the uncertainty regarding the scope and duration of the current and potential tariffs, as well as the potential for additional trade actions by the U.S. or other countries, the impact on our business, results of operations, and financial condition is uncertain but could be significant. Thus, we can provide no assurance that any strategies we implement to mitigate the impact of such tariffs or other trade actions will be successful in whole or in part. To the extent that our supply chain, costs, sales, or profitability are negatively affected by the tariffs or other trade actions, our business, financial condition, and results of operations may be materially adversely affected. In 2024, we identified an underpayment of tariffs to U.S. Customs and Border Protection (“CBP”) in the amount of approximately $1.58 million in the aggregate, related to the improper classification and valuation of certain of the products used in our batteries. The underpayment related to years 2021 through 2023. We have reported the underpayment to CBP. In the event CBP determines that we owe additional amounts or any penalties or determines in the future that we have not paid the correct duties, our results of operations could be materially impacted.

Changes in geopolitical conditions, U.S.-China trade relations and other factors beyond our control may adversely impact our business and operating results.

Our operations and performance depend, in part, on global and regional economic and geopolitical conditions, given that we have suppliers located in China. Changes in U.S.-China trade policies, and a number of other economic and geopolitical factors both in China and abroad could have a material adverse effect on our business, financial condition, results of operations or prospects. Such factors may include:

As a result of these events, our ability to obtain supplies from our China-based suppliers may be limited or adversely affected, and we may incur operational constraints.

A significant disruption to the timely receipt of inventory could adversely impact sales or increase our transportation costs, which would decrease our profits.

We rely on our distribution and transportation network, including third-party logistics providers, to provide goods in a timely and cost-effective manner through deliveries to our distribution facilities from vendors and then from the distribution facilities or direct ship vendors to our stores or customers by various means of transportation, including shipments by sea, air, rail, and truck. Any disruption, unanticipated expense, or operational failure related to this process could negatively affect our operations. For example, unexpected delivery delays (including delays due to weather, fuel shortages, work stoppages, global or regional health epidemics, product shortages from vendors, or other reasons) or increases in transportation costs (including increased fuel costs or a decrease in transportation capacity for overseas shipments) could significantly decrease our ability to provide adequate products to meet increased customer demand. In addition, labor shortages or work stoppages in the transportation industry or long-term disruptions to the national and international transportation infrastructure that lead to delays or interruptions of deliveries could negatively affect our business. Also, a fire, tornado, or other disaster at one of our distribution facilities could disrupt our timely receiving, processing, and shipment of merchandise to our stores which could adversely affect our business. While we believe there are adequate reserve quantities and alternative suppliers available, shortages or interruptions in the receipt or supply of products caused by unanticipated demand, problems in production or distribution, financial or other difficulties of supplies, inclement weather or other economic conditions, including the availability of qualified drivers and distribution center team members, could adversely affect the availability, quality and cost of products, and our operating results.

Risks Related to Our Intellectual Property

We rely heavily upon our intellectual property portfolio. If we are unable to protect our intellectual property rights, our business and competitive position would be harmed.

We may not be able to prevent unauthorized use of our intellectual property, which could harm our business and competitive position. We rely upon a combination of the intellectual property protections afforded by patent, copyright, trademark and trade secret laws in the United States and other jurisdictions to establish, maintain and enforce rights in our proprietary technologies. In addition, we seek to protect our intellectual property rights through non-disclosure and invention assignment agreements with our employees and consultants, and through non-disclosure and joint development agreements with business partners and other third parties. Despite our efforts to protect our proprietary rights, third parties may attempt to copy or otherwise obtain and use our intellectual property. Monitoring unauthorized use of our intellectual property is difficult and costly, and the steps we have taken or will take to prevent unauthorized use may not be sufficient. Any enforcement efforts we undertake, including litigation, could be time-consuming and expensive and could divert management’s attention, which could harm our business, results of operations and financial condition.

In addition, available intellectual property laws and contractual remedies in some jurisdictions may afford less protection than needed to safeguard our intellectual property portfolio. Intellectual property laws vary significantly throughout the world. The laws of a number of foreign countries do not protect intellectual property rights to the same extent as do the laws of the United States. Therefore, our intellectual property rights may not be as strong, or as easily enforced, outside of the United States, and efforts to protect against the unauthorized use of our intellectual property rights, technology and other proprietary rights may be more expensive and difficult to undertake outside of the United States. In addition, while we have filed for and obtained certain intellectual property rights in commercially relevant jurisdictions, we have not sought protection for our intellectual property rights in every possible jurisdiction. Failure to adequately protect our intellectual property rights could result in competitors using our intellectual property to make, have made, use, import, develop, have developed, sell or have sold their own products, potentially resulting in the loss of some of our competitive advantage and a decrease in our revenue, which would adversely affect our business, prospects, financial condition and operating results.

We may need to defend ourselves against intellectual property infringement claims, which may be time-consuming and could cause us to incur substantial costs.

Companies, organizations or individuals, including our current and future competitors, may hold or obtain intellectual property rights that would prevent, limit or interfere with our ability to make, have made, use, import, develop, have developed, sell or have sold our products, which could make it more difficult for us to operate our business. From time to time, we may receive inquiries from holders of intellectual property rights inquiring whether we are infringing their rights and/or seek court declarations that they do not infringe upon our intellectual property rights. Entities holding intellectual property rights relating to our technology, including, but not limited to, batteries, battery materials, encapsulated powders, spray deposition of battery materials, and alternator regulators, may bring suits alleging infringement of such rights or otherwise asserting their rights and seeking licenses. For example, patents and patent applications owned by third parties may present freedom to operate (“FTO”) questions with regards to the precoated feedstock materials for the spray deposition process depending on the final material selections that are used, although we own a patent application that pre-dates their patents and patent applications of interest such that our patent application may act as a basis for an invalidity position. However, it is possible that a court may not agree that our patent application invalidates the patents and patent applications of interest. Any such litigation or claims, whether or not valid or successful, could result in substantial costs and diversion of resources and our management’s attention. In addition, if we are determined to have infringed upon a third party’s intellectual property rights, we may be required to do one or more of the following:

In the event of a successful claim of infringement against us and our failure or inability to obtain a license to or design around the infringed intellectual property rights, our business, prospects, operating results and financial condition could be materially adversely affected.

Our current and future patent applications may not result in issued patents or our patent rights may be contested, circumvented, invalidated or limited in scope, any of which could have a material adverse effect on our ability to prevent others from commercially exploiting products similar to ours.

Our current and future patent applications may not result in issued patents, which may have a material adverse effect on our ability to prevent others from commercially exploiting products or technology similar to ours. The outcome of patent applications involves complex legal and factual questions and the breadth of claims that will be allowed is uncertain. As a result, we cannot be certain that the patent applications that we file will result in patents being issued, or that our current issued patents, and any patents that may be issued to us in the future, will afford protection that covers our commercial processes, systems and products or that will afford protection against competitors with similar products or technology. Numerous prior art patents and pending patent applications owned by others, as well as prior art non-patent literature, exist in the fields in which we have developed and are developing our technology, which may preclude our ability to obtain a desired scope of protection in the desired fields. In addition to potential prior art concerns, any of our existing patents, pending patent applications, or future issued patents or patent applications may also be challenged on the basis that they are invalid or unenforceable. Furthermore, patent applications filed in foreign countries are subject to laws, rules, and procedures that differ from those of the United States, and thus we cannot be certain that foreign patent applications related to issued U.S. patents will be issued.

Even if our current or future patent applications succeed and patents are issued, it is still uncertain whether our current or future patents will be contested, circumvented, invalidated or limited in scope in the future. The rights granted under any issued patents may not provide us with meaningful protection or competitive advantages, and some foreign countries provide significantly less effective patent enforcement than the United States. In addition, the claims under our current or future patents may not be broad enough to prevent others from developing technologies that are similar or that achieve results similar to ours. The intellectual property rights of others could also bar us from licensing and exploiting our current or future patents. In addition, our current or future patents may be infringed upon or designed around by others and others may obtain patents that we need to license or design around, either of which would increase costs and may adversely affect our business, prospects, financial condition and operating results.

General Risk Factors

The uncertainty in global and macroeconomic conditions, including economic, political and social instability, including the Russia-Ukraine conflict and Hamas’ attack on Israel, could reduce consumer spending and disrupt our supply chain which could negatively affect our results of operations.

The global credit and financial markets have recently experienced extreme volatility and disruptions including severely diminished liquidity and credit availability, disruptions in access to bank deposits and lending commitments due to bank failures, declines in economic growth, increases in unemployment rates, supply chain disruptions, heightened interest rates and inflation, stock volatility and uncertainty about economic stability. Such conditions may continue or worsen in the future. The financial markets and the global economy may also be adversely affected by the current or anticipated impact of military conflict including Russia’s invasion of Ukraine and the conflict between Hamas and Israel, terrorism or other geopolitical events. Sanctions imposed by the U.S. and other countries in response to such conflicts, including sanctions imposed in connection with the war in Ukraine and the conflict between Hamas and Israel, the effect of tariffs and/or any resulting trade wars, increasing interest rates, or other factors may also adversely impact the financial markets and the global economy and any economic countermeasures by affected countries and others could exacerbate market and economic instability. For example, in late 2024 and early 2025, the United States, China, and the European Union each announced either new tariffs, non-tariff barriers, or export controls. Any of these risks, ensuing retaliation, or the further deterioration of trade relations between countries could have an adverse impact on our financial condition and results of operations. Additional tariffs or further retaliatory trade measures taken by China or other countries in response could affect the demand for any of our products, impact the competitive position of our products, prevent us from being able to sell products in certain countries or otherwise adversely impact our results of operations. Growing tensions, protectionist trade policies, and tariffs may also lead to a fragmentation of the global economy, a general reduction of international trade in goods and services, and a reduction in the integration of financial markets, any of which could materially and adversely affect our financial condition, or prospects. There can be no assurance that further deterioration in credit and financial markets and confidence in economic conditions will not occur.

As a result of sanctions imposed in relation to the Russia-Ukraine conflict, gas prices in the United States have become much more volatile and, in some cases, risen to historic levels. This rise in price may cause a decrease in RV travel, which could ultimately negatively impact sales of our batteries for RVs. Further escalation of the Russia-Ukraine conflict and the subsequent response, including further sanctions or other restrictive actions, by the United States and/or other countries could also adversely impact our supply chain, partners or customers. The extent and duration of the situation in Ukraine, resulting sanctions and resulting future market disruptions are impossible to predict but could be significant. Any such disruptions caused by Russian military action or other actions (including cyberattacks and espionage) or resulting actual and threatened responses to such activity, boycotts or changes in consumer or purchaser preferences, sanctions, tariffs or cyberattacks, may impact the global economy and adversely affect commodity prices.

Our general business strategy as well as our suppliers’ ability to provide us with raw materials and components, may be adversely affected by any such economic downturn, volatile business environment or continued unpredictable and unstable market conditions, which could directly affect our ability to attain our operating goals on schedule and on budget, including requiring us to delay or abandon certain development plans and could have a material adverse effect on our growth strategy, financial performance and stock price. In addition, there is a risk that one or more of our current suppliers may not survive an economic downturn, which could directly affect our ability to attain our operating goals on schedule and within budget.

Changes in trade policies, including the imposition of tariffs or other trade restrictions, could materially impact our ability to obtain the raw materials, active pharmaceutical ingredients, and other components necessary for the manufacturing of our product candidates used in our clinical development activities. Some of these materials may be sourced from foreign suppliers, and any increase in tariffs or duties on imported goods could significantly raise the cost of doing business. Additionally, retaliatory tariffs, trade disputes, trade wars, or changes in international trade agreements may lead to supply chain disruptions, including delays in obtaining critical components or the need to seek alternative suppliers. If we are unable to mitigate the impact of increased costs or supply chain disruptions, our financial condition, and ability to develop our product candidates in a timely manner, could be adversely affected.

The cost of our components is a key element in the cost of our products. Increases in the prices of our components, including if our suppliers choose to pass through their increased costs to us, would result in increased production costs, which may result in a decrease in our margins and may have a material adverse effect on our business financial condition and results of operations. We have historically offset cost increases through careful management of our inventory of supplies, ordering six months to a year in advance, and increasing our purchase order volumes to qualify for volume-based discounts, rather than increase prices to customers. However, we may increase prices from time to time, which may not be sufficient to offset material price inflation and which may result in loss of customers if they believe our products are no longer competitively priced. In addition, if we are required to spend a prolonged period of time negotiating price increases with our suppliers, we may be further delayed in receiving the components necessary to manufacture our products and/or implement aspects of our growth strategy.

Adverse global conditions, including economic uncertainty, may negatively impact our financial results.

Global conditions, dislocations in the financial markets, any negative financial impacts affecting U.S. as a result of tax reform or changes to existing trade agreements or tax conventions, may adversely impact our business.

In addition, the global macroeconomic environment has been and may continue to be negatively affected by, among other things, instability in global economic markets, increased U.S. trade tariffs and trade disputes with other countries, instability in the global credit markets, supply chain weaknesses, instability in the geopolitical environment and political tensions, and foreign governmental debt concerns. Such challenges have caused, and may continue to cause, uncertainty and instability in local economies and in global financial markets, which may adversely affect our business.

The loss of one or more members of our senior management team, other key personnel or our failure to attract additional qualified personnel may adversely affect our business and our ability to achieve our anticipated level of growth.

We are highly dependent on the talent and services of Denis Phares, our Chief Executive Officer and Interim Chief Financial Officer, and other senior technical and management personnel, including our executive officers, who would be difficult to replace. The loss of Dr. Phares or other key personnel could disrupt our business and harm our results of operations, and we may not be able to successfully attract and retain senior leadership necessary to grow our business.

Our future success also depends on our ability to attract and retain other key employees and qualified personnel, and our operations may be severely disrupted if we lost their services. As we become more well known, there is increased risk that competitors or other companies will seek to hire our personnel. The failure to attract, integrate, train, motivate, and retain these personnel could impact our ability to successfully grow our operations and execute our strategy.

Our website, systems, and the data we maintain may be subject to intentional disruption, security incidents, or alleged violations of laws, regulations, or other obligations relating to data handling that could result in liability and adversely impact our reputation and future sales.

We expect to face significant challenges with respect to information security and maintaining the security and integrity of our systems, as well as with respect to the data stored on or processed by these systems. Advances in technology, and an increase in the level of sophistication, expertise and resources of hackers, could result in a compromise or breach of our systems or of security measures used in our business to protect confidential information, personal information, and other data.

The availability and effectiveness of our batteries, and our ability to conduct our business and operations, depend on the continued operation of information technology and communications systems, some of which we have yet to develop or otherwise obtain the ability to use. Systems used in our business (including third-party data centers and other information technology systems provided by third parties) are and will be vulnerable to damage or interruption. Such systems could also be subject to break-ins, sabotage and intentional acts of vandalism, as well as disruptions and security incidents as a result of non-technical issues, including intentional or inadvertent acts or omissions by employees, service providers, or others. Some of the systems used in our business will not be fully redundant, and our disaster recovery planning cannot account for all eventualities. Any data security incidents or other disruptions to any data centers or other systems used in our business could result in lengthy interruptions in our service.

If we fail to manage our growth effectively, we may be unable to execute our business plan, maintain high levels of customer service, or adequately address competitive challenges.

We have experienced significant growth in our business, and our future success depends, in part, on our ability to manage our business as it continues to expand. We have dedicated resources to expanding our manufacturing capabilities, exploring adjacent addressable markets and our solid-state cell research and development. If not managed effectively, this growth could result in the over-extension of our operating infrastructure, management systems and information technology systems. Internal controls and procedures may not be adequate to support this growth. Failure to adequately manage growth in our business may cause damage to our brand or otherwise have a material adverse effect on our business, financial condition and results of operations.

We may expand our business through acquisitions in the future, and any future acquisition may not be accretive and may negatively affect our business.

As part of our growth strategy, we may make future investments in businesses, new technologies, services and other assets that complement our business. We could fail to realize the anticipated benefits from these activities or experience delays or inefficiencies in realizing such benefits. Moreover, an acquisition, investment or business relationship may result in unforeseen operating difficulties and expenditures, including disruption to our ongoing operations, management distraction, exposure to additional liabilities and increased expenses, any of which could adversely impact our business, financial condition and results of operations. Our ability to make these acquisitions and investments could be restricted by the terms of our current and future indebtedness and to pay for these investments we may use cash on hand, incur additional debt or issue equity securities, each of which may affect our financial condition or the value of our stock and could result in dilution to our stockholders. Additional debt would result in increased fixed obligations and could also subject us to covenants or other restrictions that would impede our ability to manage our operations.

Our operations are subject to a variety of environmental, health and safety rules that can bring scrutiny from regulatory agencies and increase our costs.

Our operations are subject to environmental, health and safety rules, laws and regulations and we may be subject to additional regulations as our operations develop and expand. There are significant capital, operating and other costs associated with compliance with these environmental laws and regulations. While we believe that the policies and programs we have in place are reasonably designed and implemented to assure compliance with these requirements and to avoid hazardous substance release liability with respect to our manufacturing facility, we may be faced with new or more stringent compliance obligations that could impose substantial costs.

We are subject to anti-corruption, anti-bribery, anti-money laundering, financial and economic sanctions and similar laws, and non-compliance with such laws can subject us to administrative, civil and criminal fines and penalties, collateral consequences, remedial measures and legal expenses, all of which could adversely affect our business, results of operations, financial condition and reputation.

We are subject to anti-corruption, anti-bribery, anti-money laundering, financial and economic sanctions and similar laws and regulations in various jurisdictions in which we conduct or in the future may conduct activities, including the U.S. Foreign Corrupt Practices Act (“FCPA”). The FCPA prohibits us and our officers, directors, employees and business partners acting on our behalf, including agents, from corruptly offering, promising, authorizing or providing anything of value to a “foreign official” for the purposes of influencing official decisions or obtaining or retaining business or otherwise obtaining favorable treatment. The FCPA also requires companies to make and keep books, records, and accounts that accurately reflect transactions and dispositions of assets and to maintain a system of adequate internal accounting controls. A violation of these laws or regulations could adversely affect our business, results of operations, financial condition and reputation. Our policies and procedures designed to ensure compliance with these regulations may not be sufficient and our directors, officers, employees, representatives, consultants, agents and business partners could engage in improper conduct for which we may be held responsible.

Non-compliance with anti-corruption, anti-bribery, anti-money laundering or financial and economic sanctions laws could subject us to whistleblower complaints, adverse media coverage, investigations, and severe administrative, civil and criminal sanctions, collateral consequences, remedial measures and legal expenses, all of which could materially and adversely affect our reputation, business, financial condition and results of operations.

From time to time, we may be involved in legal proceedings and commercial or contractual disputes, which could have an adverse impact on our profitability and consolidated financial position.

We may be involved in legal proceedings and commercial or contractual disputes that, from time to time, are significant and which may harm our reputation. These are typically claims that arise in the normal course of business including, without limitation, commercial or contractual disputes, including warranty claims and other disputes with customers and suppliers; intellectual property matters; personal injury claims; environmental issues; tax matters; and employment matters. It is difficult to predict the outcome or ultimate financial exposure, if any, represented by these matters, and any such exposure may be material. Regardless of outcome, legal proceedings can have an adverse impact on us because of defense and settlement costs, diversion of management resources and other factors.

Environmental, social and governance matters may cause us to incur additional costs.

Some legislatures, government agencies and listing exchanges have mandated or proposed, and others may in the future further mandate, certain environmental, social and governance (“ESG”) disclosure or performance. For example, the Securities and Exchange Commission has enacted rules that will mandate certain companies to provide certain climate-related disclosures. In addition, we may face reputational damage in the event our corporate responsibility initiatives or objectives do not meet the standards or expectations of shareholders, prospective investors, lawmakers, listing exchanges or other stakeholders. Failure to comply with ESG-related laws, exchange policies or stakeholder expectations could materially and adversely impact the value of our stock and related cost of capital, and limit our ability to fund future growth, or result in increased investigations and litigation.

Risks Related to Being a Public Company

We will continue to incur significant increased expenses and administrative burdens as a public company, which could have an adverse effect on our business, financial condition and operating results.

We will continue to face increased legal, accounting, administrative and other costs and expenses as a public company that we did not incur as a private company and these expenses may increase even more after we are no longer an “emerging growth company.” The Sarbanes-Oxley Act, including the requirements of Section 404, as well as rules and regulations subsequently implemented by the SEC, the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 and the rules and regulations promulgated and to be promulgated thereunder, the PCAOB and the securities exchanges and the listing standards of Nasdaq, impose additional reporting and other obligations on public companies. Compliance with public company requirements will increase costs and make certain activities more time-consuming. A number of those requirements will require us to carry out activities we have not done previously. For example, we will create new board committees, enter into new insurance policies and adopt new internal controls and disclosure controls and procedures. In addition, expenses associated with SEC reporting requirements will be incurred. Furthermore, if any issues in complying with those requirements are identified (for example, if management or our independent registered public accounting firm identifies additional material weaknesses in the internal control over financial reporting), we could incur additional costs rectifying those issues, the existence of those issues could adversely affect our reputation or investor perceptions of it and it may be more expensive to obtain director and officer liability insurance. Risks associated with our status as a public company may make it more difficult to attract and retain qualified persons to serve on our board of directors or as executive officers. In addition, as a public company, we may be subject to stockholder activism, which can lead to substantial costs, distract management and impact the manner in which we operate our business in ways we cannot currently anticipate. As a result of disclosure of information in this Annual Report and in filings required of a public company, our business and financial condition will become more visible, which may result in threatened or actual litigation, including by competitors and other third parties. If such claims are successful, our business and results of operations could be materially adversely affected and even if the claims do not result in litigation or are resolved in our favor, these claims and the time and resources necessary to resolve them could divert the resources of our management and adversely affect our business and results of operations. The additional reporting and other obligations imposed by these rules and regulations will increase legal and financial compliance costs and the costs of related legal, accounting and administrative activities. These increased costs will require us to divert a significant amount of money that could otherwise be used to expand the business and achieve strategic objectives. Advocacy efforts by stockholders and third parties may also prompt additional changes in governance and reporting requirements, which could further increase costs.

Our management team has limited experience managing a public company.

Most of the members of our management team have limited experience managing and operating a publicly traded company, interacting with public company investors and complying with the increasingly complex laws pertaining to public companies. Our management team may not successfully or efficiently manage our role as a public company subject to significant regulatory oversight and reporting obligations under the federal securities laws and the continuous scrutiny of securities analysts and investors.

These obligations and constituents require significant attention from our senior management and could divert their attention away from the day-to-day management of our business, which could adversely affect our business, financial condition, and operating results.

Risks Related to Our Financial Position and Capital Requirements

Our business is capital intensive, and we may not be able to raise additional capital on attractive terms, if at all. Any further indebtedness we incur may limit our operational flexibility in the future.

As of December 31, 2024, we had cash totaling $4.8 million. Our net loss for the year ended December 31, 2024 was $40.6 million and our net loss for the year ended December 31, 2023 was $13.8 million. We will need to raise additional funds, including through the issuance of equity, equity-related or debt securities or by obtaining credit from financial institutions to fund, together with our principal sources of liquidity, ongoing costs, such as research and development relating to our solid-state batteries, expansion of our facilities, and new strategic investments. We cannot be certain that additional capital will be available on attractive terms, if at all, when needed, which could be dilutive to stockholders. If we raise additional funds through the issuance of equity or convertible debt or other equity-linked securities, our existing stockholders could experience significant dilution. Any equity securities issued may provide for rights, preferences, or privileges senior to those of common stockholders. If we raise funds by issuing debt securities, these debt securities would have rights, preferences, and privileges senior to those of common stockholders. We intend to use the ChEF Equity Facility and Term Loan to provide additional capital to us. However, market conditions and certain restrictions contained in the agreements governing the ChEF Equity Facility, the Term Loan and the Series A Preferred Stock may limit our ability to access equity and debt under such agreements.

The incurrence of additional debt could adversely impact our business, including limiting our operational flexibility by:

Failure to service our outstanding debt or comply with the financial covenants in our loan agreement could allow our lenders to accelerate payment under our loan agreement, which would have a material adverse effect on our results of obligations and financial position and raise substantial doubt about our ability to continue as a going concern. Additionally, without additional concessions or modifications to our loan agreement and the inherent uncertainty surrounding the realization of projected revenues from new markets, there is substantial doubt about our ability to continue as a going concern. Due to these reasons, this could require us, to among other things, reduce operations, sell off our assets, seek the protection of bankruptcy courts or shut down our operations and dissolve.

For the year ended December 31, 2024, we incurred losses and had a negative cash flow from operations. As of December 31, 2024, we had approximately $4.8 million in cash and cash equivalents and working capital of $11.1 million. As of December 31, 2024, we had $86 million outstanding under our Term Loan Agreement. Our ability to achieve profitability and positive cash flow depends on our ability to increase revenue, contain our expenses and maintain compliance with the financial covenants in our outstanding indebtedness agreements.

Under the Term Loan Agreement, we are obligated to comply with certain financial covenants, which include maintaining a maximum senior leverage ratio, minimum liquidity, a springing fixed charge coverage ratio, and maximum capital expenditures. On March 29, 2023 and September 29, 2023, we obtained a waiver from our Administrative Agent and Term Loan Lenders of our failures to satisfy the fixed charge coverage ratio and maximum senior leverage ratio with respect to the minimum cash requirements under the Term Loan during the quarter ended March 31, 2023 and September 30, 2023, respectively. On December 29, 2023, we received an additional waiver from our Administrative Agent and Term Loan Lenders in regards to our compliance with the Tests as of the last day of the quarter ended December 31, 2023. On March 31, 2024, April 29, 2024, May 30, 2024, June 28, 2024, July 31, 2024, August 31, 2024, September 30, 2024, October 31, 2024, November 30, 2024, December 31, 2024 and January 31, 2025, we received an additional waiver from the Administrative Agent and the Term Loan Lenders in regard to our compliance with the liquidity requirement under the Term Loan as of the last day of the fiscal quarter ended March 31, 2024, June 30, 2024, September 30, 2024 and December 31, 2024.

On February 2025, subsequent to the current year ended December 31, 2024, we entered into a Securities Purchase agreement (“Purchase Agreement”). Under the Purchase Agreement, we authorized a new series of convertible preferred stock designated as the Series A Convertible Preferred Stock, which shares are convertible into shares of our common stock, and sold shares of Series A Preferred Stock. We raised $3.5 million and expect to have an additional closing for $3.5 million, which we will use for working capital general corporate purposes and mandatory payments on the Term Loan if we raise additional capital. In connection with the Purchase Agreement, the Term Loan was amended to (i) extend the maturity date by one (1) year to October 2027, (ii) defer all principal and interest payments to April 2026 and (iii) Remove any applicable financial covenants (except for a financial covenant requiring us to maintain cash and cash equivalents equal to or greater than $2,500) for the next one and a half years.

As presented above, strategic initiatives were executed in order to alleviate the substantial doubt, such as the Company’s ability to raise funds through the Purchase Agreement, the maturity extension of the Term Loan (which reclassifies the loan as long-term on the financial statements for the year ending December 31, 2024), and the absence of any covenants, other than a $2,500 minimum cash requirement, for at least one year from the financial statement issuance date. While these initiatives were enough support to move our debt to a long term classification, the initiatives were not enough support to completely alleviate the Company’s going concern. Due to no other concessions being made by the lenders in terms of future debt and interest due, except for extending payments into 2026 and the maturity date by one year, and due to the inherent uncertainty surrounding the realization of projected revenues from new markets, management concluded that there is significant doubt about the Company’s ability to continue as a going concern.

As a result, our independent registered public accounting firm included an explanatory paragraph in its report on our 2024 consolidated financial statements, with respect to this uncertainty.

In addition, we will need to raise additional debt and/or equity financing to fund our operations and strategic plans and meet our financial covenants. We have historically been able to raise additional capital through issuance of equity and/or debt financing and we intend to use the ChEF Equity Facility and raise additional capital as needed. However, we cannot guarantee that we will be able to raise additional equity, contain expenses, or increase revenue, and comply with the financial covenants under the Term Loan. If such financings are not available, or if the terms of such financings are less desirable than we expect, we may be forced to take actions to reduce our capital or operating expenditures, including by not seeking potential acquisition opportunities, eliminating redundancies, or reducing or delaying our production facility expansions, which may adversely affect our business, operating results, financial condition and prospects. Further, any future debt or equity financings may adversely affect us, including the market price of our common stock and may be dilutive to our current stockholders. Additionally, any convertible or exchangeable securities as well as preferred stock that we issue in the future may have rights, preferences and privileges more favorable than those of our common stock. If we are unable to raise additional capital or service our debt, we may be forced to reduce operations, seek the protection of bankruptcy courts or shut down our operations and dissolve. If we liquidate our assets and the values we receive for our assets in liquidation or dissolution could be significantly lower than the values reflected in our financial statements.

Restrictions imposed by our outstanding indebtedness and any future indebtedness may limit our ability to operate our business and to finance our future operations or capital needs or to engage in acquisitions or other business activities necessary to achieve growth.

The agreements governing our indebtedness restrict us from engaging in specified types of transactions. These restrictive covenants restrict our ability to, among other things:

Under the agreements governing our indebtedness, we are also subject to certain financial covenants, including maintaining minimum levels of Adjusted EBITDA, minimum liquidity, maximum capital expenditure levels and a minimum fixed charge coverage ratio. We cannot guarantee that we will be able to maintain compliance with these covenants or, if we fail to do so, that we will be able to obtain waivers from the applicable lender(s) and/or amend the covenants. Even if we comply with all of the applicable covenants, the restrictions on the conduct of our business could adversely affect our business by, among other things, limiting our ability to take advantage of financing opportunities, mergers, acquisitions, investments, and other corporate opportunities that may be beneficial to our business.

A breach of any of the covenants in the agreements governing our existing or future indebtedness could result in an event of default, which, if not cured or waived, could trigger acceleration of our indebtedness, and may result in the acceleration of or default under any other debt we may incur in the future to which a cross- acceleration or cross-default provision applies, which could have a material adverse effect on our business, financial condition and results of operations. In the event of any default under our existing or future credit facilities, the applicable lenders could elect to terminate borrowing commitments and declare all borrowings and loans outstanding, together with accrued and unpaid interest and any fees and other obligations, to be immediately due and payable. In addition, our obligations under our indebtedness are secured by, among other things, a security interest in our intellectual property. During the existence of an event of default under our credit agreements, the applicable lender could exercise its rights and remedies thereunder, including by way of initiating foreclosure proceedings against any assets constituting collateral for our obligations under such credit facility.

We have in the past identified material weaknesses in our internal control over financial reporting. These material weaknesses in the future could adversely affect our ability to report our results of operations and financial condition accurately and in a timely manner

Our management is responsible for establishing and maintaining adequate internal control over financial reporting designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with the generally accepted accounting principles generally accepted in the United States of America (“U.S. GAAP”). As a public company, we are required, on a quarterly basis, to evaluate the effectiveness of our internal controls and to disclose any changes and material weaknesses identified through such evaluation in those internal controls. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.

As described elsewhere in this Annual Report, our management identified material weaknesses in our internal control over financial reporting as a result of our failure to capture, and record, and pay tariffs correctly related to the imported merchandise on previously filed 2022 and 2021 financial statements. We have implemented additional measures to address the material weakness relating to tariff by designing new controls to capture, record, and pay tariffs related to the imported merchandise .

Our efforts to remediate these material weaknesses in internal controls over financial reporting may not be successful, and may not prevent additional material weaknesses from being identified in the future. Failure to implement and maintain effective internal control over financial reporting could result in errors in our consolidated financial statements that could result in a restatement of our consolidated financial statements, and could cause it to fail to meet our reporting obligations, any of which could diminish investor confidence in us and cause a decline in our equity value. Additionally, ineffective internal controls could expose us to an increased risk of financial reporting fraud and the misappropriation of assets, and may further subject us to potential delisting from Nasdaq, or to other regulatory investigations and civil or criminal sanctions.

As a public company, we are required pursuant to Section 404(a) of the Sarbanes-Oxley Act to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting for each annual report on Form 10-K to be filed with the SEC. This assessment will need to include disclosure of any material weaknesses identified by our management in internal control over financial reporting. If in the future we are no longer classified under the definition of an “emerging growth company,” and/or a “non-accelerated filer”, our independent registered public accounting firm will also be required, pursuant to Section 404(b) of the Sarbanes-Oxley Act, to attest to the effectiveness of our internal control over financial reporting in each annual report on Form 10-K to be filed with the SEC. We will be required to disclose material changes made in our internal control over financial reporting on a quarterly basis. Failure to comply with the Sarbanes-Oxley Act could potentially subject us to sanctions or investigations by the SEC, Nasdaq, or other regulatory authorities, which would require additional financial and management resources.

We are not currently in compliance with the continued listing requirements for The Nasdaq Capital Market. If we do not regain compliance and continue to meet the continued listing requirements, our securities may be delisted, which could affect the market price and liquidity for our common stock and reduce our ability to raise additional capital.

On December 12, 2024, we received a written notice (the “Notice”) from the Listing Qualifications Staff of the Nasdaq Stock Market, LLC (“Nasdaq”) indicating that we are not in compliance with Nasdaq Listing Rule 5550(b)(2), which requires us to maintain a minimum Market Value of Listed Securities (“MVLS”) of $35 million for continued listing on The Nasdaq Capital Market (the “MVLS Requirement”) for the 30 consecutive business days preceding receipt of the Notice. Additionally, we do not meet either of the alternative Nasdaq continued listing standards under the Nasdaq Listing Rules, stockholders’ equity of $2,500,000, or net income of $500,000 from continuing operations in the most recently completed fiscal year, or in two of the three most recently completed fiscal years. In accordance with Nasdaq Listing Rule 5810(c)(3)(C), we will have 180 calendar days, or until June 10, 2025, to regain compliance with the MVLS Requirement, subject to extension by Nasdaq.

We intend to monitor our MVLS and may, if appropriate, consider implementing available options to regain compliance with the MVLS Requirement. If we do not regain compliance within the allotted compliance period, including any extensions that may be granted by Nasdaq, Nasdaq will provide notice that our securities will be subject to delisting. We would then be entitled to appeal that determination to a Nasdaq hearings panel. There can be no assurance that we will regain compliance with the MVLS Requirement during the 180-day compliance period or maintain compliance with the other Nasdaq listing requirements. A delisting could substantially decrease trading in our common stock, adversely affect the market liquidity of our common stock as a result of the loss of market efficiencies associated with Nasdaq and the loss of federal preemption of state securities laws, adversely affect our ability to obtain financing on acceptable terms, if at all, and may result in the potential loss of confidence by investors, suppliers, customers and employees and fewer business development opportunities. Additionally, the market price of our common stock may decline further and stockholders may lose some or all of their investment.

Future resales of our outstanding securities may cause the market price of our securities to drop significantly, even if our business is doing well.

We have filed registration statements registering the resale of up to approximately 1.7 million shares of common stock underlying outstanding warrants that may be sold and/or issued into the public markets by certain securityholders. The shares being registered for resale into the public markets represent a significant number of shares in respect to our outstanding common stock. The securityholders selling pursuant to the registration statements will determine the timing, pricing and rate at which they sell such shares into the public market and such sales could have a significant negative impact on the trading price of our common stock. As such, while sales by the securityholders selling pursuant to such registration statements may experience a positive rate of return based on the trading price at the time they sell their shares, public securityholders may not experience a similar rate of return on the securities they purchased due to differences in the prices at which such public securityholders purchased their shares and the trading price. Given the substantial number of shares of common stock being registered for potential resale by the securityholders selling pursuant to such registration statements, the sale of shares by such securityholders, or the perception in the market that the securityholders of a large number of shares intend to sell shares, may increase the volatility of the market price of our common stock, and may cause the trading prices of our securities to experience a decline.

Further, we have registered 2,390,226 shares of common stock to be issued and sold to CCM LLC in connection with the ChEF Equity Facility. Any sales of such shares into the public market could have a significant negative impact on the trading price of our common stock. This impact may be heightened by the fact that sales to CCM LLC will generally be at prices below the then current trading price of our common stock. If the trading price of our common stock does not recover or experiences a further decline, sales of shares of common stock to CCM LLC pursuant to the Purchase Agreement may be a less attractive source of capital and/or may not allow us to raise capital at rates that would be possible if the trading price of our common stock were higher.

Risks Related to Ownership of Our Common Stock

If securities or industry analysts do not publish research or reports about us, or publish negative reports, our stock price and trading volume could decline.

The trading market for our common stock will depend, in part, on the research and reports that securities or industry analysts publish about us. We will not have any control over these analysts. If our financial performance fails to meet analyst estimates or one or more of the analysts who cover us downgrade our common stock or change their opinion, our stock price would likely decline. If one or more of these analysts cease coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our stock price or trading volume to decline.

If we do not meet the expectations of investors, stockholders or securities analysts, the market price of our securities may decline. In addition, fluctuations in the price of our securities could contribute to the loss of all or part of your investment.

The trading price of our common stock may fluctuate substantially and may be lower than its current price. This may be especially true for companies like ours with a small public float. If an active market for our securities develops and continues, the trading price of our securities could be volatile and subject to wide fluctuations. The trading price of our common stock depends on many factors, including those described in this “Risk Factors” section, many of which are beyond our control and may not be related to our operating performance. These fluctuations could cause you to lose all or part of your investment in our common stock. Any of the factors listed below could have a material adverse effect on your investment in our securities and our securities may trade at prices significantly below the price you paid for them. In such circumstances, the trading price of our securities may not recover and may experience a further decline.

Factors affecting the trading price of our securities may include:

Broad market and industry factors may materially harm the market price of our securities irrespective of our operating performance. The stock market in general and Nasdaq have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of the particular companies affected. The trading prices and valuations of these stocks, and of our securities, may not be predictable. A loss of investor confidence in the market for the stocks of other companies which investors perceive to be similar to us could depress our stock price regardless of our business, prospects, financial conditions or results of operations. Broad market and industry factors, including the impact of global pandemics, as well as general economic, political and market conditions such as recessions or interest rate changes, may seriously affect the market price of our common stock, regardless of our actual operating performance. A decline in the market price of our securities also could adversely affect our ability to issue additional securities and our ability to obtain additional financing in the future.

In addition, in the past, following periods of volatility in the overall market and the market prices of particular companies’ securities, securities class action litigations have often been instituted against these companies. Litigation of this type, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources. Any adverse determination in any such litigation or any amounts paid to settle any such actual or threatened litigation could require that we make significant payments.

An active trading market for our securities may not be available on a consistent basis to provide stockholders with adequate liquidity.

We cannot assure you that an active trading market for our common stock will be sustained. Accordingly, we cannot assure you of the liquidity of any trading market, your ability to sell your shares of our common stock when desired or the prices that you may obtain for your shares.

The exercise of outstanding warrants to acquire our common stock would increase the number of shares eligible for future resale in the public market and result in dilution to our stockholders.

The exercise of outstanding warrants to acquire our common stock will increase the number of shares eligible for future resale in the public market and result in dilution to our stockholders. As of March 27, 2025 , there are currently (i) 1,046,947 shares of common stock issuable upon the exercise of outstanding public warrants at an exercise price of $103.50 per share (the “Public Warrants”); (ii) 166,821 shares of common stock issuable upon the exercise of outstanding private warrants at an exercise price of $103.50 per share (the “Private Warrants”); and (iii) 680,473 shares of common stock issuable upon exercise of outstanding Penny Warrants at an exercise price of $0.01 per share and 1,061,685 shares of common stock issuable upon exercise of outstanding Penny Warrants at an exercise price of $0.09 per share. The $10 Warrants were exercised in full in 2022 and are no longer outstanding.

In addition, the Penny Warrants have price-based anti-dilution protection against subsequent equity sales or distributions at below $90.00 per share of common stock, subject to exclusions including for issuances upon conversion exercise or exchange of securities outstanding as of October 7, 2022, the closing date of the Business Combination, issuances pursuant to agreements in effect as of the closing date of the Business Combination, issuances pursuant to employee benefit plans and similar arrangements, issuances in joint ventures, strategic arrangements or other non-financing type transactions and issuances pursuant to any public equity offerings. Depending on the nature and price of any equity issuances by us, the number of shares issuable upon the exercise of such Penny Warrants could be increased and the exercise price of the Penny Warrants could be adjusted down. Under the terms of the Penny Warrants, no adjustment will be made in connection with any sale of shares of up to $150.0 million in gross proceeds under the Purchase Agreement (or any replacement thereof) if the sales price is higher than $45.00 (appropriately adjusted for stock splits, combinations and the like). The Sponsor has agreed that the Private Warrants may not be exercised to the extent the Sponsor and any affiliate of the Sponsor is deemed to beneficially own, or it would cause the Sponsor and such affiliates to be deemed to beneficially own, more than 7.5% of our common stock.

Our operating results may fluctuate significantly, which makes our future operating results difficult to predict and could cause our operating results to fall below expectations or any guidance we may provide.

Our quarterly and annual operating results may fluctuate significantly, which makes it difficult for us to predict our future operating results. These fluctuations may occur due to a variety of factors, many of which are outside of our control, including, but not limited to:

The cumulative effects of these factors could result in large fluctuations and unpredictability in our quarterly and annual operating results. As a result, comparing our operating results on a period-to-period basis may not be meaningful. Investors should not rely on its past results as an indication of our future performance.

This variability and unpredictability could also result in our failing to meet the expectations of industry or financial analysts or investors for any period. If our revenue or operating results fall below the expectations of analysts or investors or below any forecasts we may provide to the market, or if the forecasts we provide to the market are below the expectations of analysts or investors, the price of our common stock could decline substantially. Such a stock price decline could occur even when it has met any previously publicly stated revenue or earnings guidance it may provide.

Changes in laws, regulations or rules, or a failure to comply with any laws, regulations or rules, may adversely affect our business, investments and results of operations.

We are subject to laws, regulations and rules enacted by national, regional and local governments and Nasdaq. In particular, we are required to comply with certain SEC, Nasdaq and other legal or regulatory requirements. Compliance with, and monitoring of, applicable laws, regulations and rules may be difficult, time consuming and costly. Those laws, regulations or rules and their interpretation and application may also change from time to time and those changes could have a material adverse effect on our business, investments and results of operations. In addition, a failure to comply with applicable laws, regulations or rules, as interpreted and applied, could have a material adverse effect on our business and results of operations.

Our Articles of Incorporation designates specific courts as the exclusive forum for substantially all stockholder litigation matters, which could limit the ability of our stockholders to obtain a favorable forum for disputes with us or our directors, officers or employees.

Our Articles of Incorporation provide that, unless we consent in writing to the selection of an alternative forum, to the fullest extent permitted by applicable law the Second Judicial District Court of Washoe County, Nevada is the sole and exclusive forum for any or all actions, suits or proceedings, whether civil, administrative or investigative or that asserts any claim or counterclaim: (a) brought in our name or right or on our behalf; (b) asserting a claim for breach of any fiduciary duty owed by any of our directors, officers, employees or agents to us or our stockholders; (c) arising or asserting a claim arising pursuant to any provision of the Nevada Revised Statutes (the “NRS”) Chapters 78 or 92A or any provision of our Articles of Incorporation or our Bylaws; (d) to interpret, apply, enforce or determine the validity of our Articles of Incorporation or our Bylaws; or (e) asserting a claim governed by the internal affairs doctrine. The choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers, or other employees, which may discourage such lawsuits against us and our directors, officers and other employees. Alternatively, if a court were to find the choice of forum provision contained in our Articles of Incorporation to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could adversely affect our business, financial condition and results of operations.

Our Articles of Incorporation also provides that, unless we consent in writing to the selection of an alternative forum, the federal district courts of the United States shall be the exclusive forum for the resolution of any complaint asserting a cause of action arising under the Securities Act. This provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us and our directors, officers or other employees and may have the effect of discouraging lawsuits against our directors, officers and other employees. Furthermore, stockholders may be subject to increased costs to bring these claims, and the exclusive forum provision could have the effect of discouraging claims or limiting investors’ ability to bring claims in a judicial forum that they find favorable.

Our Articles of Incorporation could discourage another company from acquiring us and may prevent attempts by our stockholders to replace or remove our management.

Provisions in our Articles of Incorporation and our Bylaws may discourage, delay, or prevent, a merger, acquisition or other change in control that stockholders may consider favorable, including transactions in which stockholders might otherwise receive a premium for their shares. These provisions could also limit the price that investors might be willing to pay in the future for shares of our common stock, thereby depressing the market price of our common stock. In addition, these provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors. As our board of directors is responsible for appointing the members of our management team, these provisions could in turn affect any attempt by our stockholders to replace current members of our management team. These provisions provide, among other things, that:

We are an emerging growth company and any decision to comply only with certain reduced reporting and disclosure requirements applicable to emerging growth companies could make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act. For as long as we continue to be an emerging growth company, we may choose to take advantage of exemptions from various reporting requirements applicable to other public companies but not to “emerging growth companies,” including:

As a result, the stockholders may not have access to certain information that they may deem important. Our status as an emerging growth company will end as soon as any of the following takes place:

Under the JOBS Act, emerging growth companies can also delay adopting new or revised accounting standards until such time as those standards apply to private companies. We may elect to take advantage of this extended transition period and as a result, our financial statements may not be comparable with similarly situated public companies.

We cannot predict if investors will find our common stock less attractive if we choose to rely on any of the exemptions afforded emerging growth companies. If some investors find our common stock less attractive because we rely on any of these exemptions, there may be a less active trading market for our common stock and the market price of our common stock may be more volatile and may decline.

If we fail to maintain an effective system of disclosure controls and internal control over financial reporting, our ability to produce timely and accurate financial statements or comply with applicable regulations could be impaired, which may adversely affect investor confidence in us and, as a result, the market price of our common stock.

As a public company, we will be required to comply with the requirements of the Sarbanes-Oxley Act, including, among other things, that we maintain effective disclosure controls and procedures and internal control over financial reporting. See “We have identified material weaknesses in our internal control over financial reporting. These material weaknesses could continue to adversely affect our ability to report our results of operations and financial condition accurately and in a timely manner” and Part II – Item 9A – Controls and Procedures. We are continuing to develop and refine our disclosure controls and other procedures that are designed to ensure that information required to be disclosed by us in the reports that we file with the SEC is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms and that information required to be disclosed in reports under the Exchange Act is accumulated and communicated to our management, including our principal executive and financial officers.

We must continue to improve our internal control over financial reporting. We will be required to make a formal assessment of the effectiveness of our internal control over financial reporting and once we cease to be an emerging growth company, we will be required to include an attestation report on internal control over financial reporting issued by our independent registered public accounting firm. To achieve compliance with these requirements within the prescribed time period, we will be engaging in a process to document and evaluate our internal control over financial reporting, which is both costly and challenging. In this regard, we will need to continue to dedicate internal resources, potentially engage outside consultants and adopt a detailed work plan to assess and document the adequacy of our internal control over financial reporting, validate through testing that controls are functioning as documented and implement a continuous reporting and improvement process for internal control over financial reporting. There is a risk that we will not be able to conclude, within the prescribed time period or at all, that our internal control over financial reporting is effective as required by Section 404 of the Sarbanes-Oxley Act. Moreover, our testing, or the subsequent testing by our independent registered public accounting firm, may reveal additional deficiencies in our internal control over financial reporting that are deemed to be material weaknesses.

Any failure to implement and maintain effective disclosure controls and procedures and internal control over financial reporting, including the identification of one or more material weaknesses, could cause investors to lose confidence in the accuracy and completeness of our financial statements and reports, which would likely adversely affect the market price of our common stock. In addition, we could be subject to sanctions or investigations by Nasdaq, the SEC and other regulatory authorities.

Unanticipated changes in effective tax rates or adverse outcomes resulting from examination of our income or other tax returns could adversely affect our financial condition and results of operations.

We will be subject to income taxes in the United States, and our tax liabilities will be subject to the allocation of expenses in differing jurisdictions. Our future effective tax rates could be subject to volatility or adversely affected by a number of factors, including:

In addition, we may be subject to audits of our income, sales and other transaction taxes by taxing authorities. Outcomes from these audits could have an adverse effect on our financial condition and results of operations.

Stockholders may experience dilution of their ownership interest due to the issuance of additional shares of common stock upon the conversion of the Series A Preferred Stock, especially since the Series A Preferred Stock has fluctuating conversion rates that are set at a discount to the market price of our common stock during the period immediately prior to conversion.

We have raised approximately $3.5 million in February 2025 through the issuance of shares of Series A Preferred Stock, and expect to issue an additional $4.5 million of additional shares of Series A Preferred Stock upon stockholder approval of the issuance of certain of the shares of common stock underlying the Series A Preferred Stock in compliance with the rules of Nasdaq and the effectiveness of a registration statement in compliance with the agreements governing the Series A Preferred Stock and may issue additional shares of Series A Preferred Stock upon certain events. The shares of Series A Preferred Stock are convertible into shares of our common stock, at the option of the holder, subject to certain conditions and limitations, at the lesser of (i) the fixed conversion price and (ii) 90% of the lowest VWAP during the 10 trading days prior to exercise, subject to the floor prices set forth in the Series A Preferred Stock. This could result in material dilution to our existing stockholders. Because the conversion price is based upon a discount to the trading price of our common stock at the time of conversion, the number of shares into which the Series A Preferred Stock may be converted may increase, subject to the floor prices of the respective series of the Series A Preferred Stock. If the trading prices of our common stock is low when the conversion price of the Series A Preferred Stock is determined, we would be required to issue a greater number of shares of common stock to the holder, which could cause substantial dilution to our stockholders. Based upon the current floor prices and the assumed floor price based on the current market price of the common stock as of the date of the filing of this Annual Report on Form 10-K for the Series A Preferred Stock to be issued at the Second Closing (as defined below), the outstanding Series A Preferred Stock could convert into up to approximately 34.8 million shares of common stock. In addition, if the holder of the Series A Preferred Stock converts and then sells our common stock, this could result in an imbalance of supply and demand for our common stock and reduce our stock price in the market significantly. The further our stock price declines, the further the adjustment of the conversion price will fall and the greater the number of shares of common stock we will have to issue upon conversion, resulting in further dilution to its stockholders. Market price-based conversion formulas, like the one contained in the Series A Preferred Stock can lead to dramatic stock price reductions and corresponding negative effects on both us and our stockholders.

We have Series A Preferred Stock outstanding which securities have certain rights and provisions that could impact our ability to complete certain transactions and could impact the market price of our common stock.

We currently have 320 shares of Series A Preferred Stock outstanding that were issued on February 27, 2025, which were initially convertible, subject to certain beneficial ownership limitations and Nasdaq restrictions until we obtain shareholder approval for the issuance of such shares in compliance with the Nasdaq rules, at the holder’s option at any time.

The Series A Preferred Stock gives its holders, subject to the preference and priority to the holders of its Common Stock, the preferred right to receive dividends, commencing from the date of issuance of the Series A Preferred Stock. The Series A Preferred Stock provides for dividends, payable quarterly in arrears in cash or shares of Series A Preferred Stock, at the dividend rate of 8% per annum and we expect such dividends to be paid in additional shares of Series A Preferred Stock.

Each share of Series A Preferred Stock carries a liquidation preference equal to the greater of (A) the Conversion Amount (as defined in the Certificate of Designation for the Series A Preferred Stock) of such Series A Preferred Stock on the date of such payment and (B) the amount per share such holder would receive if such holder converted such Series A Preferred Stock into common stock immediately prior to the date of such payment.

The agreements governing our Series A Preferred Stock restrict us from engaging in specified types of transactions. These restrictive covenants restrict our ability to, among other things, incur additional indebtedness; create or incur encumbrances or liens; pay dividends and distributions on, or purchase, redeem, defease, or otherwise acquire or retire for value, our stock, make certain sales under our ChEF Equity Facility and other restrictive covenants.

Our obligations to the holders of the Series A Preferred Stock could limit our ability to obtain additional financing or complete certain transactions or increase our borrowing costs, which could have an adverse effect on its financial condition and hinder the accomplishment of our corporate goals.

In addition to the Series A Preferred Stock, our board could authorize the issuance of additional series of preferred stock with such rights preferential to the rights of our common stock, including the issuance of a series of preferred stock that has greater voting power than our common stock or that is convertible into our common stock, which could decrease the relative voting power of our common stock or result in dilution to its existing stockholders.

Item 1B. Unresolved Staff Comments

Not applicable.

Item 1C. Cybersecurity

Cybersecurity Risk Management

Governance

Item 2. Properties

On February 8, 2022, we entered into a 124-month lease for an additional 390,240 square foot warehouse. In November, 2024, we relocated our headquarters to our new 390,240 square foot warehouse at 12915 Old Virginia Road in Reno, Nevada 89521. The current rent, which became payable on March 25, 2024 is $230,000 payable monthly.

We are currently leasing a 99,000 square foot facility at 1190 Trademark Drive #108, Reno, Nevada, which was the prior location of our headquarters until November 2024. The lease for this building was entered into on March 1, 2021 and expires on April 30, 2026. The current monthly rent is $59,750.

We are also currently leasing a 59,500 square foot warehouse facility at 12815 Old Virginia Road in Reno, Nevada. The lease for this space was entered into on December 1, 2021, and expires December 31, 2026; the current monthly rent is $49,732.

On April 12, 2024, we entered into the Fernley Lease Agreement, effective April 1, 2024, for the approximately 64,000 square foot Premises located at 2275 East Newlands Road, Fernley, Nevada, to be used for general, warehousing, assembly/light manufacturing, painting of products, storage fulfillment, distribution of our products. The Fernley Lease Agreement expires April 1, 2029. The current monthly rent is $44,800.

Our Research & Development lab is a 9,600 square foot facility located in Sparks, Nevada. The lease for these premises was entered into on July 27, 2020 and expires on July 31, 2025. The current monthly rent is $9,336.

Our podcast studio was a 1,772 square foot facility located in Sparks, Nevada. The lease for this space expired on September 20, 2024.

Item 3. Legal Proceedings

From time to time, we may become involved in litigation or other legal proceedings. We are not currently a party to any litigation or legal proceedings that, in the opinion of our management, are likely to have a material adverse effect on our business. Regardless of outcome, litigation can have an adverse impact on us because of defense and settlement costs, diversion of management resources and other factors.

Item 4. Mine Safety Disclosures

Not applicable.

Part II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our common stock is currently listed on the Nasdaq Capital Market under the symbol “DFLI” and our Public Warrants are currently listed on the Nasdaq Capital Market under the symbol “DFLIW”. As of March 27, 2025, the closing price of our common stock and warrants was $1.07 and $0.03, respectively. As of March 27, 2025 , there were 83 holders of record of our common stock and 2 holders of record of our Public Warrants.

Dividend Policy

We currently intend to retain all available funds and any future earnings to fund the growth and development of our business. We have never declared or paid any cash dividends on our common stock. We do not intend to pay cash dividends to our common stockholders in the foreseeable future. Investors should not purchase our common stock with the expectation of receiving cash dividends.

Any future determination to declare dividends will be made at the discretion of our board of directors and will depend on our financial condition, operating results, capital requirements, general business conditions, and other factors that our board of directors may deem relevant.

Item 6. [Reserved]

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

All statements other than statements of historical fact included in this section regarding our financial position, business strategy and the plans and objectives of management for future operations, are forward- looking statements. When used in this section, words such as “anticipate,” “believe,” “estimate,” “expect,” “intend” and similar expressions, as they relate to our management, identify forward-looking statements. Such forward-looking statements are based on the beliefs of management, as well as assumptions made by, and information currently available to, our management. Actual results could differ materially from those contemplated by the forward- looking statements as a result of certain factors detailed herein. All subsequent written or oral forward-looking statements attributable to us or persons acting on our behalf are qualified in their entirety by this paragraph.

Some of the information contained in this discussion and analysis or set forth elsewhere, including information with respect to our plans and strategy for our business include forward-looking statements that involve risks, uncertainties and assumptions. You should read the sections titled “Cautionary Note Regarding Forward-Looking Statements” and “Risk Factors” for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis.

On November 22, 2024, we effected a reverse stock split for our issued and outstanding Common Stock at a ratio of 1-for-9. All of our historical share and per share information related to issued and outstanding Common Stock and outstanding options and warrants exercisable for Common Stock included in this prospectus have been adjusted, on a retroactive basis, to reflect the reverse stock splits. See “Corporate Information.”

Overview

We are a manufacturer of non-toxic deep cycle lithium-ion batteries that are designed to displace lead acid batteries in a number of different storage applications and end markets including RV, marine vessel, and solar and off-grid industries, and trucking, industrial and energy storage with disruptive cell manufacturing and solid-state cell technology currently under development.

Since 2020, we have sold over 330,000 batteries. For the years ended December 31, 2024 and 2023, we sold 42,447 and 64,096 batteries, respectively, and had $50.6 million and $64.4 million in net sales, respectively. We currently offer a line of batteries across our “Battle Born” and “Dragonfly” brands, each differentiated by size, power and capacity, consisting of seven different models, having optional features including internal heat for cold temperature operation and Dragonfly IntelLigence communication capabilities.

Our decrease in 2024 total sales is a reflection of weaker demand from DTC customers in our core RV and marine markets due to rising interest rates and inflation, as well as increased market competition from imported products sold direct to consumer on Amazon. Our RV OEM customers currently include Keystone, THOR, Airstream, and REV, and we are in ongoing discussions with a number of additional RV OEMs to further increase adoption of our products. Related efforts include seeking to have RV OEMs “design in” our batteries as original equipment and entering into arrangements with members of the various OEM dealer networks to stock our batteries for service and for aftermarket replacement sales. The decision of Keystone RV to make lithium batteries an option rather than a standard reduced our OEM revenue in the second half of 2023. However, our increase in RV OEM business in 2024 kept our RV OEM revenue relatively flat from 2023 to 2024.

We currently source the lithium iron phosphate cells incorporated into our batteries from a limited number of carefully selected suppliers that can meet our demanding quality standards and with whom we have developed long-term relationships.

In May 2024, we announced that we achieved full certification for our energy storage products to be deployed for use in oil & gas operations in North America. As a result of this certification, a number of opportunities within the oil & gas space have appeared. For example, we have designed a power product for Alegacy Equipment, a market leading natural gas compressor package company, and their affiliate Agnes Systems. This power system is expected to be used in natural gas compression equipment to reduce methane emissions. The first of these systems was successfully deployed in the fourth quarter of 2024; and this business line is expected to begin contributing to net sales in 2025.

To supplement our battery offerings, we are also a reseller of accessories for battery systems. These include chargers, inverters, monitors, controllers, solar panels, and other system accessories from brands such as Victron Energy, Progressive Dynamics, Magnum Energy and Sterling Power. Pursuant to the Asset Purchase Agreement dated April 22, 2022 by and among us and Thomason Jones and the other parties thereto, we also acquired the assets, including Wakespeed of Thomason Jones, allowing us to include our own alternator regulator in systems that we sell.

In addition to our conventional LFP batteries, we have been developing proprietary dry electrode cell manufacturing processes and solid-state cell technology. We believe that our solid-state technology design allows for a much safer, more efficient battery cell that we believe will be a key differentiator in the energy storage market.

As of December 31, 2024, we had cash totaling $4.8 million. Our net loss for the years ended December 31, 2024 and December 31, 2023, were $40.6 million and $13.8 million, respectively. In addition, in February 2025, we completed an offering of shares of our Series A Preferred Stock which provided us with an additional net proceeds of $3.2 million As discussed under “—Liquidity and Capital Resources” below we expect that we will need to raise additional funds, including through the use of the ChEF Equity Facility and the issuance of equity, equity-related or debt securities or by obtaining additional credit from financial institutions to fund, together with our principal sources of liquidity, ongoing costs. If such financings are not available, or if the terms of such financings are less desirable than we expect, we may be forced to take actions to reduce our capital or operating expenditures, including not seeking potential acquisition opportunities, eliminating redundancies, or reducing or delaying our production facility expansions, reduce operations, sell off our assets, seek the protection of bankruptcy courts or shut down our operations and dissolve.

License Agreement with Stryten

On July 29, 2024, Legacy Dragonfly and Battle Born Battery Products, LLC (“Battle Born LLC”), a newly formed wholly-owned subsidiary of Legacy Dragonfly, entered into a License Agreement (the “License Agreement”) with Stryten. Pursuant to the License Agreement, Battle Born LLC granted Stryten an exclusive, worldwide license to use certain trademarks relating to Legacy Dragonfly’s lithium-ion battery brand, Battle Born Batteries® (the “Licensed Trademarks”) for business-to-business sales of batteries to customers within the following markets: (i) automative, (ii) marine, (iii) powersports, (iv) lawn and garden, (v) golf cart, and (vi) military and defense (such industries, the “Stryten Market”). In exchange for the licensing rights, Stryten agreed to pay Battle Born LLC an initial licensing fee of five million dollars ($5,000,000) (the “Initial Licensing Fee”), which was paid on August 29, 2024.

The License Agreement provides for mid-single digit royalty payments based on net sales using the Licensed Trademarks, with a tiered structure reaching up to twenty-five million dollars ($25,000,000), at which point Stryten will be required to pay a nominal annual license fee. Additional fees will apply for battery design and contract manufacturing services outside of the License Agreement. The License Agreement is perpetual in term, unless terminated by: (i) Battle Born LLC if Stryten fails to pay the royalty payments required by the License Agreement and such royalty payments remain unpaid thirty (30) days after notice of such overdue payments (provided that Battle Born LLC uses reasonable efforts to discuss such overdue payments with Stryten), or (ii) either party (x) if the other party materially breaches the License Agreement and fails to cure such material breach within thirty (30) days of notice of such breach, (y) upon the occurrence of certain bankruptcy-related events, or (z) under certain circumstances, if the aggregate royalty payments received by Battle Born LLC under the License Agreement are less than fifteen million dollars ($15,000,000) after five (5) years.

Earnout Merger Consideration

In addition to the initial merger consideration in connection with our business combination, up to 4,444,445 additional shares of common stock (“Earnout Shares”) may be issued based on achieving specified milestones in three tranches:

If a change of control occurs during the second or third earnout periods, unachieved milestones will be automatically deemed satisfied if the share price at the time of the transaction meets or exceeds $202.50 for the second period or $292.50 for the third period.

ChEF Equity Facility

We have the ChEF Equity Facility. During the year ended December 31, 2024, we sold 350,423 shares pursuant to the Purchase Agreement with CCM LLC for aggregate proceeds to us of $2,043,885. We intend to use the ChEF Equity Facility to help maintain minimum cash balances required by the lenders as we continue to execute on growing the business through product releases, customer/market expansion, and R&D milestones. We expect to use the ChEF Equity Facility as a regular source of funds over the next twelve months and our available share balance increases, allowing for more consistent purchases under the ChEF Equity Facility. Use of the ChEF Equity Facility may adversely affect us, including the market price of our common stock and future issuances may be dilutive to existing stockholders.

June 2023 Offering

On June 20, 2023, we entered into the Underwriting Agreement with the Underwriters, pursuant to which we sold to the Underwriters, in a firm commitment underwritten public offering, or the June 2023 Offering, an aggregate of (i) 1,111,111 shares of common stock, par value $0.0001 and (ii) Investor Warrants to purchase up to 1,111,111 shares of common Stock, at the combined public offering price of $18.00 per share and accompanying Investor Warrant, less underwriting discounts and commissions, and (iii) Underwriters’ Warrants to purchase up to an aggregate of 63,362 shares of common stock. In addition, we granted the Underwriters a 45-day over-allotment option to purchase up to an additional 166,667 shares of common stock and/or Investor Warrants to purchase up to an aggregate of 166,667 shares of Common Stock at the public offering price per security, less underwriting discounts and commissions.

The Investor Warrants are exercisable for five years from the closing date of the Offering, have an exercise price of $18.00 per share and are immediately exercisable. In the event of certain fundamental transactions, holders of the Investor Warrants will have the right to receive the Black Scholes Value (as defined in the Investor Warrants) of their Investor Warrants calculated pursuant to the formula set forth in the Investor Warrants, payable either in cash or in the same type or form of consideration that is being offered and being paid to the holders of common stock. The Underwriters’ Warrants are exercisable upon issuance and will expire on June 20, 2028. The initial exercise price of the Underwriters’ Warrants is $22.50 per share, which equals 125% of the per share public offering price in the Offering.

As part of the June 2023 Offering, the Underwriters partially exercised their over-allotment option in the amount of 156,112 shares of Common Stock and Investor Warrants to purchase 156,112 shares of common stock. The June 2023 Offering closed on June 22, 2023. The aggregate net proceeds from the June 2023 Offering, including the partial overallotment option, was approximately $20.7 million.

December 2023 Private Placement

On December 29, 2023, we received the December 2023 Waiver from the Term Loan Lenders in regards to our compliance with the Tests as of the last day of the quarter ended December 31, 2023. The December 2023 Waiver provided for a one-time issuance of the Waiver Penny Warrants to purchase up to 142,964 Waiver Penny Warrant Shares, at an exercise price of $0.09 per share, in connection with the Term Loan Lender’s agreement to waive the Tests under the Term Loan for the quarter ended December 31, 2023. The Waiver Penny Warrants were immediately exercisable upon issuance and will expire ten years from the date of issuance.

May 2024 Private Placement

On May 13, 2024, we received a waiver (the “May 2024 Waiver”) from the Term Loan Lenders in regards to our compliance with the Tests as of the last day of the quarter ended March 31, 2024. The May 2024 Waiver provided for a one-time issuance of penny warrants (the “May 2024 Penny Warrants”) to purchase up to 283,334 shares of our common stock (the “May 2024 Penny Warrant Shares”), at an exercise price of $0.09 per share, in connection with the Term Loan Lender’s agreement to waive the Tests under the Term Loan for the quarter ended March 31, 2024. The May 2024 Penny Warrants were immediately exercisable upon issuance and will expire ten years from the date of issuance.

June 2024 Private Placement and First Amendment to Term Loan Agreement

On June 28, 2024, we received a limited waiver and first amendment (the “First Amendment”) to the Term Loan Agreement from the Term Loan Lenders in regards to our compliance with the Tests as of the last day of the quarter ended June 30, 2024. The First Amendment provided for a one-time issuance of penny warrants (the “June 2024 Penny Warrants”) to purchase up to 233,334 shares of our common stock (the “June 2024 Penny Warrant Shares”), at an exercise price of $0.09 per share, in connection with the Term Loan Lender’s agreement to waive the Tests under the Term Loan for the quarter ended June 30, 2024. The June 2024 Penny Warrants were immediately exercisable upon issuance and will expire ten years from the date of issuance.

In addition, the First Amendment (i) reduced the liquidity requirement under the Term Loan to be $3.5 million as of the last day of the month ended June 30, 2024, and $10.0 million as of the last day of each fiscal month thereafter commencing with the fiscal month ended July 31, 2024 and (ii) provided for the interest to be paid on the Payment Date (as defined in the Term Loan Agreement) occurred on July 1, 2024 to be solely payable-in-kind.

Second Amendment to Term Loan Agreement

In connection with the License Agreement, on July 29, 2024, us, Legacy Dragonfly and Battle Born LLC entered into a Limited Waiver, Consent and Second Amendment to the Term Loan, Guarantee and Security Agreement (the “Second Amendment”) with the Term Loan Lenders under our Original Term Loan Agreement (as defined below).

Pursuant to the Second Amendment, the Term Loan Lenders (i) consented to the transactions contemplated by the License Agreement and the Trademark Transfer Agreement and (ii) agreed to waive the mandatory prepayment under the Term Loan Agreement that would have been due to the Term Loan Lenders under the Loan Agreement upon Battle Born LLC’s receipt of the Initial Licensing Fee.

In connection with the Amendment, Battle Born LLC entered into a Joinder Agreement with the Term Loan Lenders (the “Joinder”) whereby Battle Born LLC became a guarantor and credit party to the Term Loan Agreement.

September 2024 Private Placement and Third Amendment to the Term Loan Agreement

On September 30, 2024, we received a limited waiver and third amendment (the “Third Amendment”) to the Term Loan Agreement from the Term Loan Lenders in regards to our compliance with the Tests as of the last day of the quarter ended September 30, 2024. The Third Amendment provided for a one-time issuance of penny warrants (the “September 2024 Penny Warrants”) to purchase up to 333,334 shares of our common stock (the “September 2024 Penny Warrant Shares”), at an exercise price of $0.09 per share, in connection with the Term Loan Lender’s agreement to waive the Tests under the Term Loan for the quarter ended September 30, 2024. The September 2024 Penny Warrants were immediately exercisable upon issuance and will expire ten years from the date of issuance.

In addition, the Third Amendment (i) reduced the liquidity requirement under the Term Loan to be $7.0 million as of the last day of the month ended September 30, 2024, and $10.0 million as of the last day of each fiscal month thereafter commencing with the fiscal month ended July 31, 2024 and (ii) on October 1, 2024, interest is payable (a) $1,500,000 in cash pro rata benefit of the Lenders and (b) the remaining interest in-kind, to be capitalized and added to the principal. For Payment Dates occurring on or after January 1, 2025 (including interest accruing from October 1, 2024, through December 31, 2024), all interest shall be paid in cash at a rate equal to Adjusted Term SOFR (as defined in the Term Loan Agreement) plus the Applicable Margin (as defined in the Term Loan Agreement).

December 2024 Private Placement and Fourth Amendment to the Term Loan Agreement

On December 31, 2024, we received a limited waiver and fourth amendment (the “Fourth Amendment”) to the Term Loan Agreement from the Term Loan Lenders in regards to our compliance with the Tests as of the last day of the quarter ended December 31, 2024. The Fourth Amendment provided for a one-time issuance of penny warrants (the “December 2024 Penny Warrants”) to purchase up to 350,000 shares of our common stock (the “December 2024 Penny Warrant Shares”), at an exercise price of $0.01 per share, in connection with the Term Loan Lender’s agreement to waive the Tests under the Term Loan for the quarter ended December 31, 2024. The December 2024 Penny Warrants will be exercisable at such time that we obtain the Warrant Issuance Shareholder Approval (as defined below) and will expire ten years from the date of issuance.

In addition, the Fourth Amendment (i) reduced the liquidity requirement under the Term Loan to be $3.5 million as of the last day of the month ended December 31, 2024, and $10.0 million as of the last day of each fiscal month thereafter commencing with the fiscal month ended January 31, 2025 and (ii) on January 1, 2025, interest is payable in-kind, to be capitalized and added to the principal. For Payment Dates occurring on or after April 1, 2025 (including interest accruing from January 1, 2025, through March 31, 2025), all interest shall be paid in cash at a rate equal to Adjusted Term SOFR plus the Applicable Margin.

Pursuant to the Fourth Amendment, we agreed to use commercially reasonable efforts to obtain shareholder approval for the issuance of up to 1,400,000 shares of common stock underlying penny warrants issued to the Term Loan Lenders on and after the date of the Fourth Amendment, including the December 2024 Penny Warrant Shares and the Accrued Warrant Shares (as defined below), in accordance with Rules 5635(b) and 5635(d) of the Nasdaq Stock Market (the “Warrant Issuance Shareholder Approval”). Further, we agreed to issue the Term Loan Lenders additional penny warrants (the “Accrued Penny Warrants”) exercisable for a number of shares of common stock pursuant to the formula set forth in the Fourth Amendment (the “Accrued Warrant Shares”) upon the earlier to occur of (i) five business days after the end of the Waiver Period (as defined below) or (ii) five business days prior to the effectiveness of a Change of Control (as defined in the Term Loan Agreement), in which such Accrued Penny Warrants would not be exercisable prior to receipt of the Warrant Issuance Shareholder Approval.

Under the Fourth Amendment, the Term Loan Lenders agreed to temporarily suspend the Term Loan Lenders’ rights under Section 4(b) of the Penny Warrants to receive additional warrant shares in connection with the issuances by us of shares of common stock pursuant to the ChEF Equity Facility during the Waiver Period. In addition, the Fourth Amendment: (i) provided for the interest to be paid on the Payment Date (as defined in the Term Loan Agreement) occurring on January 1, 2025 to be payable partly in cash and the remainder payable-in-kind as set forth in the Amendment; and (ii) reduced the liquidity requirement under the Term Loan Agreement to be $3.5 million as of the last day of the fiscal month ended December 31, 2024.

February 2025 Registered Direct Offering and Concurrent Private Placement and Fifth Amendment to Term Loan Agreement

On February 26, 2025, we entered into a securities purchase agreement with a single institutional investor, pursuant to which we sold in a registered direct offering (the “Registered Direct Offering”) 180 shares of Series A Preferred Stock, at a price of $10,000 per share, initially convertible into shares of our common stock, at a conversion price of $2.332 per share of common stock. The Series A Preferred Stock is also convertible by the investor at an adjusted conversion price, subject to the applicable floor price, which is based on a discount to the market price of our common stock as set forth in the certificate of designation for the Series A Preferred Stock. The floor price for the Series A Preferred Stock sold in the Registered Direct Offering is $1.00.

Concurrently with the sale of the Series A Preferred Stock in the Registered Direct Offering, in a private placement offering pursuant to the Purchase Agreement (the “Private Placement” and, together with the Registered Direct Offering, the “Offerings”), we sold, at the initial closing of the Private Placement (the “Initial Closing”), (i) an additional 170 shares of Series A Preferred Stock at the same offering price as the Series A Preferred Stock offered in the Registered Direct Offering, initially convertible into shares of common stock at a conversion price of $2.332 per share, and (ii) warrants (the “Private Placement Warrants”) to purchase up to an aggregate of 4,000 shares of Series A Preferred Stock (the “Private Placement Warrant Shares”), with an exercise price of $10,000 per share of Series A Preferred Stock, and a term as described below. The floor price for the Series A Preferred Stock sold in the Private Placement is $0.424.

The exercise price under each Private Placement Warrant will be $10,000 per share of Series A Preferred Stock. Each Private Placement Warrant will be exercisable for 200 shares of Series A Preferred Stock in minimum increments of $500,000. The Private Placement Warrants will have a term beginning on the issuance date and ending on or prior to the earlier of (i) the thirty-three (33) month anniversary of the date the shares of common stock issued or issuable upon the conversion of the Series A Preferred Stock issued in the concurrent Private Placement are registered for resale (“Registration Effectiveness”) pursuant to an effective registration statement under the Securities Act of 1933, as amended, (the “Securities Act”) (such date, the “Registration Effectiveness Date”) and (ii) (A) the consummation of a Change of Control (as defined in the certificate of designation) and (B) the consummation of a redemption of the then outstanding Series A Preferred Stock in full. The exercise price and number of shares of Series A Preferred Stock issuable upon exercise are subject to appropriate adjustment in the event of share dividends, share splits, reorganizations or similar events affecting shares of our common stock.

Pursuant to the Private Placement Warrants, we have a call right upon the occurrence of certain events. No earlier than two (2) months following the Registration Effectiveness Date and (2) the most recent conversion or exercise in full of a Private Placement Warrant, (i) the VWAP for each of twenty (20) trading days (the “Measurement Period”) exceeds $3.00, (ii) the average daily volume for such Measurement Period exceeds $300,000 per trading day, (iii) the aggregate stated value of the then outstanding Series A Preferred Stock is less than or equal to $1,500,000, (iv) the Private Placement Warrant Shares are registered for resale pursuant to an effective registration statement and (v) there has not been an Equity Conditions Failure (as defined in the certificate of designation), then we may, within one (1) trading day of the end of such Measurement Period, call for cancellation of all or any portion of the Private Placement Warrant for which a notice to exercise has not yet been delivered and require the holder to exercise in part or in full the number of shares of Series A Preferred Stock set forth in an irrevocable written notice (a “Call Notice”) for consideration equal to the applicable number of Series A Preferred Stock issuable upon exercise or cancellation of the Private Placement Warrants.

In addition, upon receipt of stockholder approval pursuant to the rules of Nasdaq for certain shares of common stock issuable upon conversion of the Series A Preferred Stock and the Registration Effectiveness, the investor will be automatically required to purchase for $4.5 million (the “Second Closing”) an additional 450 shares of Series A Preferred Stock (the “Second Closing Preferred Shares”). The Second Closing Preferred Shares will be identical to the Series A Preferred Stock offered in the Registered Direct Offering and sold in the initial closing of the Private Placement, other than the conversion price and the floor price which will be determined at the time of the Second Closing based on the Nasdaq minimum price.

The net proceeds to us from the Initial Offerings, after deducting the placement agent’s fees and expenses and estimated offering expenses, were approximately $3.2 million, excluding the net proceeds, if any, from the exercise of the Private Placement Warrants.

As a condition precedent to the closing of the Offerings, on February 26, 2025, we entered into the Fifth Amendment (the “Fifth Amendment”) to the Term Loan Agreement with the Term Loan Lenders. Under the Fifth Amendment, the Term Loan Lenders agreed to, among other matters (i) receive no principal or interest payments under the Term Loan Agreement through March 31, 2026, and (ii) remove certain financial covenant tests under the Term Loan, provided that we maintain cash and cash equivalents equal to at least $2.5 million through such date.

Pursuant to the Fifth Amendment, we agreed to make certain mandatory prepayments on the Term Loan upon the occurrence of certain events. We are obligated to make a mandatory prepayment of the term loan equal to (i) 100% of the net cash proceeds of certain equity issuances by us made on or after the announcement of a Change of Control (as defined in the Term Loan Agreement), and (ii) 20% of the net cash proceeds of certain equity issuances by us made prior to the announcement of a Change of Control.

In connection with the entry into the Fifth Amendment, we issued to the Term Loan Lenders 330,000 penny warrants (the “February 2025 Penny Warrants”) to purchase shares of our common stock at an exercise price of $0.01 per share on the date of the Initial Closing in connection with the waiver of the antidilution provisions in the existing penny warrants held by the Term Loan Lenders with respect to the shares of Series A Preferred Stock issued at the closing of the Registered Direct Offering and the initial closing of the Private Placement. We also agreed to increase the number of shares subject to the Warrant Issuance Shareholder Approval (as defined in the Term Loan Agreement) from 1,400,000 to 3,130,000. Further, we and the Term Loan Lenders agreed to waive the antidilution provisions in the existing penny warrants held by the Lenders with respect to the Private Placement Warrants issued at the initial closing of the Private Placement and the shares of Series A Preferred Stock issued at the Second Closing on the condition that we will issue to the Term Loan Lenders a number of penny warrants which will be determined by the parties within five (5) trading days after the end of each fiscal quarter after the Second Closing.

Key Factors Affecting Our Operating Results

Our financial position and results of operations depend to a significant extent on the following factors:

End Market Consumers

The demand for our products ultimately depends on demand from consumers in our current end markets. We generate sales through (1) direct-to-customer and (2) through OEMs, particularly in the RV market.

An increasing proportion of our sales has been and is expected to continue to be derived from sales to RV and other OEMs, driven by continued efforts to develop larger and more complete storage systems. Although our battery systems are built in to each model, our RV OEM sales have been on a purchase order basis, without firm revenue commitments, and we expect that this will likely continue to be the case. Therefore, future RV OEM sales will be subject to risks and uncertainties, including the number of RVs these OEMs manufacture and sell, which in turn may be driven by the expectations these OEMs have around end market consumer demand.

Demand from end market consumers is impacted by a number of factors, including travel restrictions, fuel costs and energy demands (including an increasing trend towards the use of green energy), as well as overall macro-economic conditions and inflation. Sales of our batteries have benefited from the increased adoption of the RV lifestyle, the demand for and inclusion of additional appliances and electronics in RVs, and the accelerating trend of solar power adoption among RV customers. However, macro-economic conditions and increased competition from imported battery packs have led to a decrease in direct to consumer sales. We have addressed this drop in through product diversification by the release of our Dragonfly IntelLigence feature, as well as more targeted marketing efforts to increase the efficiency of our marketing spend. We expect that direct to consumer sales will remain relatively flat through 2025. However, we expect growth among our existing RV OEM customers due to an overall increase in RV shipments as the industry slowly recovers from the market correction, as well as our customers expanding the number of models that will include our battery systems in the new model year. Moreover, we expect increased revenue through our market diversification efforts – especially in our industrials market, including industrial solar and oil and gas, as well as the trucking market, in which we have been piloting our systems with fleets for the last two years.

Our strategy includes plans to expand into new end markets that we have identified as opportunities for our LFP batteries, including, rail, specialty and work vehicles, material handling, solar integration, and emergency and standby power, in the medium term, and data centers, telecom and distributed on-grid storage in the longer term. We believe that our current LFP batteries and, eventually, our solid-state batteries, will be well-suited to supplant traditional lead-acid batteries as a reliable power source for the variety of low power density uses required in these markets (such as powering the increasing number of on-board tools needed in emergency vehicles). The success of this strategy requires (1) continued growth of these addressable markets in line with our expectations and (2) our ability to successfully enter these markets. We expect to incur significant marketing costs understanding these new markets, and researching and targeting customers in these end markets, which may not result in sales. If we fail to execute on this growth strategy in accordance with our expectations, our sales growth would be limited to the growth of existing products and existing end markets.

Supply

We currently rely on two carefully selected cell manufacturers located in China, and a single supplier, also located in China, to manufacture our proprietary battery management system, and we intend to continue to rely on these suppliers going forward. Our close working relationships with our China-based LFP cell suppliers, reflected in our ability to increase our purchase order volumes (qualifying us for related volume-based discounts) and order and receive delivery of cells in anticipation of required demand, has helped us moderate increased supply-related costs associated with inflation, currency fluctuations and U.S. government tariffs imposed on our imported battery cells and to avoid potential shipment delays. To mitigate against potential adverse production events, we opted to build our inventory of key components, such as battery cells. However, as many of the supply chain challenges and delays that were prevalent over the last several years have eased, we are actively working down our inventory to more appropriate safety stock levels.

As a result of our battery chemistry and active steps we have taken to manage our inventory levels, we have not been subject to the shortages or price impacts that have been present for manufacturers of nickel manganese cobalt and nickel cobalt aluminum batteries. As we look toward the production of our solid-state cells, we have signed a Commercial Offtake Agreement with a lithium mining company located in Nevada for the supply of lithium, which we expect will enable us to further manage our cost of goods over time.

Product and Customer Mix

Our product sales consist of sales of seven different models of LFP batteries, along with accessories for battery systems (individually or bundled). These products are sold to different customer types (e.g., consumers, OEMs and distributors) and at different prices and involve varying levels of costs. In any particular period, changes in the mix and volume of particular products sold and the prices of those products relative to other products will impact our average selling price and our cost of goods sold. Despite our work to moderate increased supply-related costs, the price of our products may also increase as a result of increases in the cost of components due to inflation, currency fluctuations and tariffs. OEM sales typically result in lower average selling prices and related margins, which could result in margin erosion, negatively impact our growth or require us to raise our prices. However, this reduction is typically offset by the benefits of increased sales volumes. Sales of third-party sourced accessories typically have lower related margin. We expect accessory sales to increase as we further develop full-system design expertise and product offerings and consumers increasingly demand more sophisticated systems, rather than simple drop-in replacements. In addition to the impacts attributable to the general sales mix across our products and accessories, our results of operations are impacted by the relative margins of products sold. As we continue to introduce new products at varying price points, our overall gross margin may vary from period to period as a result of changes in product and customer mix.

Production Capacity

All of our battery assembly currently takes place at our 390,240 square foot headquarters and manufacturing facility located in Reno, Nevada. While the lease for the 99,000 facility is continuing, no manufacturing is taking place in this location. We currently operate three LFP battery production lines. Consistent with our operating history, we plan to continue to automate additional aspects of our battery production lines. Our existing facility has the capacity to add up to four additional LFP battery production lines and construct and operate a pilot production line for our solid-state cells, all designed to maximize the capacity of our manufacturing facility. Although our automation efforts are expected to reduce our costs of goods, we may not fully recognize the anticipated savings when planned and could experience additional costs or disruptions to our production activities.

Competition

We compete with traditional lead-acid battery manufacturers and lithium-ion battery manufacturers, who primarily either import their products or components or manufacture products under a private label. As we continue to expand into new markets, develop new products and move towards production of our own conventional LFP cells and, in the longer term, solid state cells, we will experience competition with a wider range of companies. These competitors may have greater resources than we do and may be able to devote greater resources to the development of their current and future technologies. Our competitors may be able to source materials and components at lower costs, which may require us to evaluate measures to reduce our own costs, lower the price of our products or increase sales volumes in order to maintain our expected levels of profitability.

Research and Development

Our research and development is currently primarily focused on the scaling our proprietary dry electrode process for domestic production of full LFP cells. Although we have reallocated resources from the advanced manufacturing of solid-state lithium-ion batteries in order to focus on conventional cells, we expect to return to the solid-state chemistry as capital becomes more available for these longer term projects.

Components of Results of Operations

Net Sales

Net sales is primarily generated from the sale of our LFP batteries to OEMs and consumers, as well as chargers and other accessories, either individually or bundled.

Cost of Goods Sold

Cost of goods sold includes the cost of cells and other components of our LFP batteries, labor and overhead, logistics and freight costs, and depreciation of manufacturing equipment.

Gross Profit

Gross profit, calculated as net sales less cost of goods sold, may vary between periods and is primarily affected by various factors including average selling prices, product costs, product mix and customer mix.

Operating Expenses

Research and development

Research and development costs include personnel-related expenses for scientists, experienced engineers and technicians as well as the material and supplies to support the development of new products and our solid-state technology.

General and administrative

General and administrative costs include personnel-related expenses attributable to our executive, finance, human resources, and information technology organizations, certain facility costs, and fees for professional services.

Selling and marketing

Selling and marketing costs include outbound freight, personnel-related expenses, as well as trade show, industry event, marketing, customer support, and other indirect costs. We expect to continue to make the necessary sales and marketing investments to enable the execution of our strategy, which includes expanding into additional end markets.

Total Other Income (Expense)

Other income (expense) consists primarily of interest expense, the change in fair value of the warrant liability and amortization of debt issuance costs.

Results of Operations

Comparisons for the Years Ended December 31, 2024 and 2023

The following table sets forth our results of operations for the years ended December 31, 2024 and 2023. This data should be read together with our financial statements and related notes included elsewhere in this Annual Report, and is qualified in its entirety by reference to such financial statements and related notes.

Net Sales

Net sales decreased by $13.7 million, or 21.3%, to $50.6 million for the year ended December 31, 2024, as compared to $64.4 million for the year ended December 31, 2023. This decrease was primarily due to lower DTC battery and accessory sales due to a decline in demand in our core RV markets, partially offset by a slight increase in average sale prices for our batteries which is related to product mix. For the year ended December 31, 2024, DTC revenue decreased by $14.3 million as a result of decreased customer demand for our products due to rising interest rates and inflation. We expect our sales to increase as the cyclical recovery of the RV market gains momentum in the coming quarters and entrance into new markets, trucking and industrials, with new product offerings.

Cost of Goods Sold

Cost of goods sold decreased by $9.9 million, or 20.3%, to $39.0 million for the year ended December 31, 2024, as compared to $48.9 million for the year ended December 31, 2023. This decrease was primarily due to a $9.1 million decrease in product cost due to lower unit volume, a decrease in labor expense due to reduced headcount and reduced overhead. We expect the materials and labor portion of our Cost of goods sold to increase in conjunction with the anticipated increase in revenue over the next 12 months.

Gross Profit

Gross profit decreased by $3.8 million, or 24.7%, to $11.6 million for the year ended December 31, 2024, as compared to $15.4 million for the year ended December 31, 2023. The decrease in gross profit was primarily due to lower unit volumes and a change in revenue mix that included a larger percentage of lower margin OEM sales and a lower percentage of higher margin DTC sales. Gross Profit percentage decreased by 1.0% from 24.0% in 2023 to 23.0% in 2024. Lower volume caused a reduction in absorption of labor and overhead impacting gross profit by 1.6% along with a decrease in material costs increasing gross profit by 0.6%. We expect our Gross Profit, as a percentage of revenue, to increase over the next 12 months with higher volumes increasing absorption of labor and overhead.

Research and Development Expenses

Research and development expenses increased by $1.6 million, or 41.1%, to $5.5 million for the year ended December 31, 2024, as compared to $3.9 million for the year ended December 31, 2023. The increase was primarily due to $0.8 million in higher employee related expenses due to increased headcount and an increase in rent related to the new lease in Fernley. Product development expenses and depreciation also increased related to new products introduced during the year ended December 31, 2024. We expect Research and Development expenses to reduce as we change our focus from Solid State to Product Development.

General and Administrative Expenses

General and administrative expenses decreased by $4.5 million, or 17.0%, to $21.9 million for the year ended December 31, 2024, as compared to $26.4 million for the year ended December 31, 2023. This decrease was primarily due to reduction of employee related costs totaling $7.0 million due to lower headcount, which includes lower stock-based compensation expense in the amount of $4.9 million. We also incurred lower compliance, insurance, and professional fees related to public company costs in the amount of $1.3 million, and a $0.7 million decrease in investor relations expenses. The decrease in expense was offset by an impairment loss accrued for assets held for sale at year end of $0.9 million and a loss on patent litigation settlement accrued of $2.5 million. We expect General and Administrative Expenses, as a percentage of revenue, to increase as we increase the staffing in our Engineering department over the next 12 months.

Selling and Marketing Expenses

Sales and marketing expenses decreased by $2.6 million, or 20.6%, to $10.0 million for the year ended December 31, 2024, as compared to $12.6 million for the year ended December 31, 2023. This decrease was primarily due to a $2.3 million reduction in employee related costs and lower stock-based compensation. Shipping costs are also lower by $0.9 million due to lower unit volumes, partially offset by travel and entertainment, previously allocated to General and Administrative Expense, and higher general marketing expenses. We expect our Selling and Marketing Expenses to be relatively stable over the next 12 months.

Total Other Income (Expense)

Other expense totaled $14.9 million for the year ended December 31, 2024 as compared to total other income of $13.6 million for the year ended December 31, 2023. Other expense in 2024 is comprised primarily of interest expense of $21.5 million related to our debt securities partially offset by a change in fair market value of warrant liability in the amount of $6.7 million. Other income in 2023 is comprised of a change in fair market value of warrant liability in the amount of $29.6 million, partially offset by interest expense of $16.0 million related to our debt securities.

Income Tax Benefit

The income tax benefit for the years ended December 31, 2024 and December 31, 2024 were immaterial. The income tax benefit reflects our expected use of losses in the period against future tax obligations. Management evaluated the positive and negative evidence bearing upon the realizability of its deferred tax assets and determined that it is more likely than not that we will not recognize the benefits of the deferred tax assets primarily due to us entering into a 3-year cumulative loss position. As a result, a full valuation allowance totaling $19.7 million was recorded as of December 31, 2023 revalued at $29.4 million for the year ended December 31, 2024

Net Loss

We experienced a net loss of $40.6 million for the year ended December 31, 2024, as compared to a net loss of $13.8 million for the year ended December 31, 2023. As described above, this result was driven by increased other expenses, lower sales due to reduced demand in the RV market, partially offset by lower cost of goods sold and lower operating expenses.

Critical Accounting Estimates

Our consolidated financial statements have been prepared in accordance with generally accepted accounting principles in the United States. The preparation of these consolidated financial statements requires us to make judgments and estimates that affect the reported amounts of assets, liabilities, revenues and expenses, and the disclosure of contingent assets and liabilities in our financial statements. We base our estimates on historical experience, known trends and events and various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Our actual results may differ from these estimates under different assumptions or conditions. On a recurring basis, we evaluate our judgments and estimates in light of changes in circumstances, facts, and experience. The effects of material revisions in an estimate, if any, will be reflected in the consolidated financial statements prospectively from the date of the change in the estimate.

We consider an accounting estimate to be critical if: (1) the accounting estimate requires us to make assumptions about matters that were highly uncertain at the time the accounting estimate was made, and (2) changes in the estimate that are reasonably likely to occur from period to period, or use of different estimates that we reasonably could have used in the current period, would have a material impact on our financial condition or results of operations.

Management has discussed the development and selection of these critical accounting estimates with the Audit Committee of our board of directors. In addition, there are other items within our financial statements that require estimation but are not deemed critical as defined above. Changes in estimates used in these and other items could have a material impact on our financial statements.

We believe that the following accounting policies are those most critical to the judgments and estimates used in the preparation of our financial statements.

Inventory Valuation

We periodically review physical inventory for excess, obsolete, and potentially impaired items and reserves. Any such inventory is written down to net realizable value. The reserve estimate for excess and obsolete inventory is dependent on expected future use and requires management judgement. The level of the estimate is assessed by considering the recent sales experience, the aging of inventories, and other factors that affect inventory obsolescence.

Income Taxes

We account for income taxes using the asset and liability method. Under this method, deferred tax assets and liabilities are recognized for the future tax consequences of temporary differences between the carrying amounts and tax bases of assets and liabilities using enacted rates. The effect of a change in tax rates on deferred taxes is recognized in income in the period that includes the enactment date.

We recognize the financial statement effect of an uncertain income tax position when it is more likely than not, based on the technical merits, that the position will be sustained upon examination. Recognized income tax positions are measured at the largest amount that is greater than 50% likely to be realized. A valuation allowance is recorded to reduce deferred income tax assets to an amount, which in the opinion of management is more likely than not to be realized.

Management judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities, and any valuation allowance recorded against our deferred tax assets. We consider factors such as the cumulative income or loss in recent years; reversal of deferred tax liabilities; projected future taxable income exclusive of temporary differences; the character of the income tax asset, including income tax positions; tax planning strategies and the period over which we expect the deferred tax assets to be recovered in the determination of the valuation allowance. In the event that actual results differ from these estimates or we adjust our estimates in the future, we may need to adjust our valuation allowance, which could materially impact our financial position and results of operations.

The amount of the deferred tax asset considered realizable could be adjusted if our actual results in the future do not generate taxable income that is sufficient to allow us to utilize our deferred tax assets. Our future taxable income projections are subject to a high degree of uncertainty and could be impacted, both positively and negatively, by changes in our business or the markets in which we operate. A change in the assessment of the realizability of our deferred tax assets could materially impact our results of operations.

Leases

Acquired right-of-use assets and assumed lease liabilities are measured based on the remaining lease payments over the remaining portion of the lease term. As our leases do not provide an implicit rate, our incremental borrowing rate is used as a discount rate in determining the present value of lease payments. Our incremental borrowing rate was determined by comparing current low- and high-end mortgage loan rates and calculating an average. For our new Damonte lease, to be conservative in our estimate, we chose to use the high-end average as our incremental borrowing rate .

License Arrangement

We have entered into license arrangements that involve receiving upfront compensation, which is recognized as revenue over a five-year period. Management estimates the appropriate recognition pattern based on the expected delivery of related services and the period over which the economic benefits will be realized. This estimate involves judgments about the timing of performance obligations and the likelihood of continued customer engagement. Changes in these assumptions or unexpected developments could result in adjustments to revenue recognition, impacting the financial statements. As of the reporting date, management believes the estimate reflects the current understanding of the license arrangement’s performance obligations.

Non-GAAP Financial Measures

This Annual Report includes a non-GAAP measure that we use to supplement our results presented in accordance with U.S. GAAP. EBITDA is defined as earnings before interest and other income (expenses), income taxes, and depreciation and amortization. Adjusted EBITDA is calculated as EBITDA adjusted for stock-based compensation, ERP implementation, non-recurring debt transaction and business combination expenses. Adjusted EBITDA is a performance measure that we believe is useful to investors and analysts because it illustrates the underlying financial and business trends relating to our core, recurring results of operations and enhances comparability between periods.

Adjusted EBITDA is not a recognized measure under U.S. GAAP and is not intended to be a substitute for any U.S. GAAP financial measure and, as calculated, may not be comparable to other similarly titled measures of performance of other companies in other industries or within the same industry. Investors should exercise caution in comparing our non-GAAP measure to any similarly titled measure used by other companies. This non-GAAP measure excludes certain items required by U.S. GAAP and should not be considered as an alternative to information reported in accordance with U.S. GAAP.

The table below presents our adjusted EBITDA, reconciled to net (loss) income for the years ended December 31, 2024 and 2023.